From: Daniel Scally <dan.scally@ideasonboard.com>
To: linux-usb@vger.kernel.org
Cc: laurent.pinchart@ideasonboard.com, gregkh@linuxfoundation.org,
mgr@pengutronix.de, kieran.bingham@ideasonboard.com,
Daniel Scally <dan.scally@ideasonboard.com>
Subject: [PATCH 1/3] usb: gadget: uvc: Rename uvc_control_ep
Date: Mon, 5 Dec 2022 14:37:56 +0000 [thread overview]
Message-ID: <20221205143758.1096914-2-dan.scally@ideasonboard.com> (raw)
In-Reply-To: <20221205143758.1096914-1-dan.scally@ideasonboard.com>
The f_uvc code defines an endpoint named "uvc_control_ep" but it
is configured with a non-zero endpoint address and has its
bmAttributes flagged as USB_ENDPOINT_XFER_INT - this cannot be the
VideoControl interface's control endpoint, as the default endpoint
0 is used for that purpose. This is instead the optional interrupt
endpoint that can be contained by a VideoControl interface.
Rename the variables to make that clear.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
---
drivers/usb/gadget/function/f_uvc.c | 24 ++++++++++++------------
drivers/usb/gadget/function/uvc.h | 2 +-
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index 6e196e06181e..49b7231742d6 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -86,7 +86,7 @@ static struct usb_interface_descriptor uvc_control_intf = {
.iInterface = 0,
};
-static struct usb_endpoint_descriptor uvc_control_ep = {
+static struct usb_endpoint_descriptor uvc_interrupt_ep = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
@@ -290,14 +290,14 @@ uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
if (alt)
return -EINVAL;
- uvcg_info(f, "reset UVC Control\n");
- usb_ep_disable(uvc->control_ep);
+ uvcg_info(f, "reset UVC interrupt endpoint\n");
+ usb_ep_disable(uvc->interrupt_ep);
- if (!uvc->control_ep->desc)
- if (config_ep_by_speed(cdev->gadget, f, uvc->control_ep))
+ if (!uvc->interrupt_ep->desc)
+ if (config_ep_by_speed(cdev->gadget, f, uvc->interrupt_ep))
return -EINVAL;
- usb_ep_enable(uvc->control_ep);
+ usb_ep_enable(uvc->interrupt_ep);
if (uvc->state == UVC_STATE_DISCONNECTED) {
memset(&v4l2_event, 0, sizeof(v4l2_event));
@@ -375,7 +375,7 @@ uvc_function_disable(struct usb_function *f)
uvc->state = UVC_STATE_DISCONNECTED;
usb_ep_disable(uvc->video.ep);
- usb_ep_disable(uvc->control_ep);
+ usb_ep_disable(uvc->interrupt_ep);
}
/* --------------------------------------------------------------------------
@@ -511,7 +511,7 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
* uvc_iad
* uvc_control_intf
* Class-specific UVC control descriptors
- * uvc_control_ep
+ * uvc_interrupt_ep
* uvc_control_cs_ep
* uvc_ss_control_comp (for SS only)
* uvc_streaming_intf_alt0
@@ -523,7 +523,7 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
control_size = 0;
streaming_size = 0;
bytes = uvc_iad.bLength + uvc_control_intf.bLength
- + uvc_control_ep.bLength + uvc_control_cs_ep.bLength
+ + uvc_interrupt_ep.bLength + uvc_control_cs_ep.bLength
+ uvc_streaming_intf_alt0.bLength;
if (speed == USB_SPEED_SUPER) {
@@ -569,7 +569,7 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
uvc_control_header->bInCollection = 1;
uvc_control_header->baInterfaceNr[0] = uvc->streaming_intf;
- UVC_COPY_DESCRIPTOR(mem, dst, &uvc_control_ep);
+ UVC_COPY_DESCRIPTOR(mem, dst, &uvc_interrupt_ep);
if (speed == USB_SPEED_SUPER)
UVC_COPY_DESCRIPTOR(mem, dst, &uvc_ss_control_comp);
@@ -656,12 +656,12 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
(opts->streaming_maxburst + 1));
/* Allocate endpoints. */
- ep = usb_ep_autoconfig(cdev->gadget, &uvc_control_ep);
+ ep = usb_ep_autoconfig(cdev->gadget, &uvc_interrupt_ep);
if (!ep) {
uvcg_info(f, "Unable to allocate control EP\n");
goto error;
}
- uvc->control_ep = ep;
+ uvc->interrupt_ep = ep;
if (gadget_is_superspeed(c->cdev->gadget))
ep = usb_ep_autoconfig_ss(cdev->gadget, &uvc_ss_streaming_ep,
diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h
index 40226b1f7e14..48b71e04c2b1 100644
--- a/drivers/usb/gadget/function/uvc.h
+++ b/drivers/usb/gadget/function/uvc.h
@@ -146,7 +146,7 @@ struct uvc_device {
} desc;
unsigned int control_intf;
- struct usb_ep *control_ep;
+ struct usb_ep *interrupt_ep;
struct usb_request *control_req;
void *control_buf;
--
2.34.1
next prev parent reply other threads:[~2022-12-05 14:38 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-05 14:37 [PATCH 0/3] Add ability to disable UVC Gadget's interrupt endpoint Daniel Scally
2022-12-05 14:37 ` Daniel Scally [this message]
2022-12-08 15:33 ` [PATCH 1/3] usb: gadget: uvc: Rename uvc_control_ep Greg KH
2022-12-08 15:39 ` Dan Scally
2022-12-28 1:59 ` Laurent Pinchart
2023-01-01 20:25 ` Dan Scally
2022-12-05 14:37 ` [PATCH 2/3] usb: gadget: uvc: Add new disable_interrupt_ep attribute Daniel Scally
2022-12-08 15:32 ` Greg KH
2022-12-28 2:02 ` Laurent Pinchart
2022-12-05 14:37 ` [PATCH 3/3] usb: gadget: uvc: Allow disabling of interrupt endpoint Daniel Scally
2022-12-28 2:09 ` Laurent Pinchart
2023-01-01 20:46 ` Dan Scally
2023-01-02 10:24 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221205143758.1096914-2-dan.scally@ideasonboard.com \
--to=dan.scally@ideasonboard.com \
--cc=gregkh@linuxfoundation.org \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-usb@vger.kernel.org \
--cc=mgr@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox