linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-usb@vger.kernel.org
Cc: "Yehezkel Bernat" <YehezkelShB@gmail.com>,
	"Michael Jamet" <michael.jamet@intel.com>,
	"Lukas Wunner" <lukas@wunner.de>,
	"Andreas Noever" <andreas.noever@gmail.com>,
	"Christian Schaubschläger" <christian.schaubschlaeger@gmx.at>,
	"Gil Fine" <gil.fine@linux.intel.com>,
	"Mika Westerberg" <mika.westerberg@linux.intel.com>
Subject: [PATCH 4/5] thunderbolt: Limit USB3 bandwidth of certain Intel USB4 host routers
Date: Mon,  6 Mar 2023 13:36:04 +0200	[thread overview]
Message-ID: <20230306113605.46137-5-mika.westerberg@linux.intel.com> (raw)
In-Reply-To: <20230306113605.46137-1-mika.westerberg@linux.intel.com>

From: Gil Fine <gil.fine@linux.intel.com>

Current Intel USB4 host routers have hardware limitation that the USB3
bandwidth cannot go higher than 16376 Mb/s. Work this around by adding a
new quirk that limits the bandwidth for the affected host routers.

Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
 drivers/thunderbolt/quirks.c | 31 +++++++++++++++++++++++++++++++
 drivers/thunderbolt/tb.h     |  3 +++
 drivers/thunderbolt/usb4.c   | 17 +++++++++++++++--
 3 files changed, 49 insertions(+), 2 deletions(-)

diff --git a/drivers/thunderbolt/quirks.c b/drivers/thunderbolt/quirks.c
index ae28a03fa890..1157b8869bcc 100644
--- a/drivers/thunderbolt/quirks.c
+++ b/drivers/thunderbolt/quirks.c
@@ -26,6 +26,19 @@ static void quirk_clx_disable(struct tb_switch *sw)
 	tb_sw_dbg(sw, "disabling CL states\n");
 }
 
+static void quirk_usb3_maximum_bandwidth(struct tb_switch *sw)
+{
+	struct tb_port *port;
+
+	tb_switch_for_each_port(sw, port) {
+		if (!tb_port_is_usb3_down(port))
+			continue;
+		port->max_bw = 16376;
+		tb_port_dbg(port, "USB3 maximum bandwidth limited to %u Mb/s\n",
+			    port->max_bw);
+	}
+}
+
 struct tb_quirk {
 	u16 hw_vendor_id;
 	u16 hw_device_id;
@@ -43,6 +56,24 @@ static const struct tb_quirk tb_quirks[] = {
 	 * DP buffers.
 	 */
 	{ 0x8087, 0x0b26, 0x0000, 0x0000, quirk_dp_credit_allocation },
+	/*
+	 * Limit the maximum USB3 bandwidth for the following Intel USB4
+	 * host routers due to a hardware issue.
+	 */
+	{ 0x8087, PCI_DEVICE_ID_INTEL_ADL_NHI0, 0x0000, 0x0000,
+		  quirk_usb3_maximum_bandwidth },
+	{ 0x8087, PCI_DEVICE_ID_INTEL_ADL_NHI1, 0x0000, 0x0000,
+		  quirk_usb3_maximum_bandwidth },
+	{ 0x8087, PCI_DEVICE_ID_INTEL_RPL_NHI0, 0x0000, 0x0000,
+		  quirk_usb3_maximum_bandwidth },
+	{ 0x8087, PCI_DEVICE_ID_INTEL_RPL_NHI1, 0x0000, 0x0000,
+		  quirk_usb3_maximum_bandwidth },
+	{ 0x8087, PCI_DEVICE_ID_INTEL_MTL_M_NHI0, 0x0000, 0x0000,
+		  quirk_usb3_maximum_bandwidth },
+	{ 0x8087, PCI_DEVICE_ID_INTEL_MTL_P_NHI0, 0x0000, 0x0000,
+		  quirk_usb3_maximum_bandwidth },
+	{ 0x8087, PCI_DEVICE_ID_INTEL_MTL_P_NHI1, 0x0000, 0x0000,
+		  quirk_usb3_maximum_bandwidth },
 	/*
 	 * CLx is not supported on AMD USB4 Yellow Carp and Pink Sardine platforms.
 	 */
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index b3cd13dc783b..275ff5219a3a 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -272,6 +272,8 @@ struct tb_bandwidth_group {
  * @group: Bandwidth allocation group the adapter is assigned to. Only
  *	   used for DP IN adapters for now.
  * @group_list: The adapter is linked to the group's list of ports through this
+ * @max_bw: Maximum possible bandwidth through this adapter if set to
+ *	    non-zero.
  *
  * In USB4 terminology this structure represents an adapter (protocol or
  * lane adapter).
@@ -299,6 +301,7 @@ struct tb_port {
 	unsigned int dma_credits;
 	struct tb_bandwidth_group *group;
 	struct list_head group_list;
+	unsigned int max_bw;
 };
 
 /**
diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c
index 95ff02395822..6e87cf993c68 100644
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -1882,6 +1882,15 @@ int usb4_port_retimer_nvm_read(struct tb_port *port, u8 index,
 				usb4_port_retimer_nvm_read_block, &info);
 }
 
+static inline unsigned int
+usb4_usb3_port_max_bandwidth(const struct tb_port *port, unsigned int bw)
+{
+	/* Take the possible bandwidth limitation into account */
+	if (port->max_bw)
+		return min(bw, port->max_bw);
+	return bw;
+}
+
 /**
  * usb4_usb3_port_max_link_rate() - Maximum support USB3 link rate
  * @port: USB3 adapter port
@@ -1903,7 +1912,9 @@ int usb4_usb3_port_max_link_rate(struct tb_port *port)
 		return ret;
 
 	lr = (val & ADP_USB3_CS_4_MSLR_MASK) >> ADP_USB3_CS_4_MSLR_SHIFT;
-	return lr == ADP_USB3_CS_4_MSLR_20G ? 20000 : 10000;
+	ret = lr == ADP_USB3_CS_4_MSLR_20G ? 20000 : 10000;
+
+	return usb4_usb3_port_max_bandwidth(port, ret);
 }
 
 /**
@@ -1930,7 +1941,9 @@ int usb4_usb3_port_actual_link_rate(struct tb_port *port)
 		return 0;
 
 	lr = val & ADP_USB3_CS_4_ALR_MASK;
-	return lr == ADP_USB3_CS_4_ALR_20G ? 20000 : 10000;
+	ret = lr == ADP_USB3_CS_4_ALR_20G ? 20000 : 10000;
+
+	return usb4_usb3_port_max_bandwidth(port, ret);
 }
 
 static int usb4_usb3_port_cm_request(struct tb_port *port, bool request)
-- 
2.39.1


  parent reply	other threads:[~2023-03-06 11:37 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-06 11:36 [PATCH 0/5] thunderbolt: A couple of fixes Mika Westerberg
2023-03-06 11:36 ` [PATCH 1/5] thunderbolt: Fix memory leak in margining Mika Westerberg
2023-03-06 11:36 ` [PATCH 2/5] thunderbolt: Add missing UNSET_INBOUND_SBTX for retimer access Mika Westerberg
2023-03-06 11:36 ` [PATCH 3/5] thunderbolt: Call tb_check_quirks() after initializing adapters Mika Westerberg
2023-03-06 11:36 ` Mika Westerberg [this message]
2023-03-06 11:36 ` [PATCH 5/5] thunderbolt: Use scale field when allocating USB3 bandwidth Mika Westerberg
2023-03-06 15:12   ` Yehezkel Bernat
2023-03-13 10:07 ` [PATCH 0/5] thunderbolt: A couple of fixes Mika Westerberg
2023-03-13 13:07   ` Christian Schaubschläger
2023-03-14  7:32     ` Mika Westerberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230306113605.46137-5-mika.westerberg@linux.intel.com \
    --to=mika.westerberg@linux.intel.com \
    --cc=YehezkelShB@gmail.com \
    --cc=andreas.noever@gmail.com \
    --cc=christian.schaubschlaeger@gmx.at \
    --cc=gil.fine@linux.intel.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=michael.jamet@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).