From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 06/14] xhci: mem: Replace explicit castings with appropriate specifiers
Date: Fri, 17 Mar 2023 17:47:07 +0200 [thread overview]
Message-ID: <20230317154715.535523-7-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20230317154715.535523-1-mathias.nyman@linux.intel.com>
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is no need to have explicit castings when we have specific pointer
extensions. Replace the explicit castings with appropriate specifiers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-mem.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index b8c1465f8d23..67ac02d177b5 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -666,8 +666,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
cur_ring->cycle_state;
stream_info->stream_ctx_array[cur_stream].stream_ring =
cpu_to_le64(addr);
- xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n",
- cur_stream, (unsigned long long) addr);
+ xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n", cur_stream, addr);
ret = xhci_update_stream_mapping(cur_ring, mem_flags);
if (ret) {
@@ -977,16 +976,14 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
if (!dev->out_ctx)
goto fail;
- xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
- (unsigned long long)dev->out_ctx->dma);
+ xhci_dbg(xhci, "Slot %d output ctx = 0x%pad (dma)\n", slot_id, &dev->out_ctx->dma);
/* Allocate the (input) device context for address device command */
dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags);
if (!dev->in_ctx)
goto fail;
- xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
- (unsigned long long)dev->in_ctx->dma);
+ xhci_dbg(xhci, "Slot %d input ctx = 0x%pad (dma)\n", slot_id, &dev->in_ctx->dma);
/* Initialize the cancellation and bandwidth list for each ep */
for (i = 0; i < 31; i++) {
@@ -2351,8 +2348,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
goto fail;
xhci->dcbaa->dma = dma;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "// Device context base array address = 0x%llx (DMA), %p (virt)",
- (unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
+ "// Device context base array address = 0x%pad (DMA), %p (virt)",
+ &xhci->dcbaa->dma, xhci->dcbaa);
xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
/*
@@ -2393,8 +2390,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
goto fail;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Allocated command ring at %p", xhci->cmd_ring);
- xhci_dbg_trace(xhci, trace_xhci_dbg_init, "First segment DMA is 0x%llx",
- (unsigned long long)xhci->cmd_ring->first_seg->dma);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "First segment DMA is 0x%pad",
+ &xhci->cmd_ring->first_seg->dma);
/* Set the address in the Command Ring Control register */
val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
--
2.25.1
next prev parent reply other threads:[~2023-03-17 15:46 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-17 15:47 [PATCH 00/14] xhci features for usb-next Mathias Nyman
2023-03-17 15:47 ` [PATCH 01/14] xhci: mem: Carefully calculate size for memory allocations Mathias Nyman
2023-03-17 15:47 ` [PATCH 02/14] xhci: mem: Use dma_poll_zalloc() instead of explicit memset() Mathias Nyman
2023-03-17 15:47 ` [PATCH 03/14] xhci: mem: Get rid of redundant 'else' Mathias Nyman
2023-03-17 15:47 ` [PATCH 04/14] xhci: mem: Drop useless return:s Mathias Nyman
2023-03-17 15:47 ` [PATCH 05/14] xhci: mem: Use while (i--) pattern to clean up Mathias Nyman
2023-03-17 15:47 ` Mathias Nyman [this message]
2023-03-17 15:47 ` [PATCH 07/14] xhci: mem: Join string literals back Mathias Nyman
2023-03-17 15:47 ` [PATCH 08/14] xhci: dbc: Provide sysfs option to configure dbc descriptors Mathias Nyman
2023-03-17 15:47 ` [PATCH 09/14] xhci: Avoid PCI MSI/MSIX interrupt reinitialization at resume Mathias Nyman
2023-03-17 15:47 ` [PATCH 10/14] xhci: Move functions to setup msi to xhci-pci Mathias Nyman
2023-03-17 15:47 ` [PATCH 11/14] xhci: move PCI specific MSI/MSIX cleanup away from generic xhci functions Mathias Nyman
2023-03-17 15:47 ` [PATCH 12/14] xhci: Move functions to cleanup MSI to xhci-pci Mathias Nyman
2023-03-17 15:47 ` [PATCH 13/14] xhci: Call MSI sync function from xhci-pci instead of generic xhci code Mathias Nyman
2023-03-17 15:47 ` [PATCH 14/14] xhci: Move xhci MSI sync function to to xhci-pci Mathias Nyman
2023-03-17 15:53 ` [PATCH 00/14] xhci features for usb-next Mathias Nyman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230317154715.535523-7-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox