From: Niklas Schnelle <schnelle@linux.ibm.com>
To: Arnd Bergmann <arnd@arndb.de>,
Alan Stern <stern@rowland.harvard.edu>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Bjorn Helgaas" <bhelgaas@google.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Rafael J. Wysocki" <rafael@kernel.org>,
"Geert Uytterhoeven" <geert@linux-m68k.org>,
"Paul Walmsley" <paul.walmsley@sifive.com>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Albert Ou" <aou@eecs.berkeley.edu>,
linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
linux-pci@vger.kernel.org, "Arnd Bergmann" <arnd@kernel.org>,
linux-usb@vger.kernel.org
Subject: [PATCH v5 37/44] usb: uhci: handle HAS_IOPORT dependencies
Date: Mon, 22 May 2023 12:50:42 +0200 [thread overview]
Message-ID: <20230522105049.1467313-38-schnelle@linux.ibm.com> (raw)
In-Reply-To: <20230522105049.1467313-1-schnelle@linux.ibm.com>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to guard sections of code calling them
as alternative access methods with CONFIG_HAS_IOPORT checks. For
uhci-hcd there are a lot of I/O port uses that do have MMIO alternatives
all selected by uhci_has_pci_registers() so this can be handled by
UHCI_IN/OUT macros and making uhci_has_pci_registers() constant 0 if
CONFIG_HAS_IOPORT is unset.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
---
drivers/usb/host/uhci-hcd.c | 2 +-
drivers/usb/host/uhci-hcd.h | 24 +++++++++++++++++-------
2 files changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 7cdc2fa7c28f..fd2408b553cf 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -841,7 +841,7 @@ static int uhci_count_ports(struct usb_hcd *hcd)
static const char hcd_name[] = "uhci_hcd";
-#ifdef CONFIG_USB_PCI
+#if defined(CONFIG_USB_PCI) && defined(CONFIG_HAS_IOPORT)
#include "uhci-pci.c"
#define PCI_DRIVER uhci_pci_driver
#endif
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 0688c3e5bfe2..13ee2a6144b2 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -505,6 +505,14 @@ static inline bool uhci_is_aspeed(const struct uhci_hcd *uhci)
* we use memory mapped registers.
*/
+#ifdef CONFIG_HAS_IOPORT
+#define UHCI_IN(x) x
+#define UHCI_OUT(x) x
+#else
+#define UHCI_IN(x) 0
+#define UHCI_OUT(x) do { } while (0)
+#endif
+
#ifndef CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC
/* Support PCI only */
static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
@@ -539,7 +547,7 @@ static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
#else
/* Support non-PCI host controllers */
-#ifdef CONFIG_USB_PCI
+#if defined(CONFIG_USB_PCI) && defined(HAS_IOPORT)
/* Support PCI and non-PCI host controllers */
#define uhci_has_pci_registers(u) ((u)->io_addr != 0)
#else
@@ -587,7 +595,7 @@ static inline int uhci_aspeed_reg(unsigned int reg)
static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
- return inl(uhci->io_addr + reg);
+ return UHCI_IN(inl(uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -601,7 +609,7 @@ static inline u32 uhci_readl(const struct uhci_hcd *uhci, int reg)
static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
{
if (uhci_has_pci_registers(uhci))
- outl(val, uhci->io_addr + reg);
+ UHCI_OUT(outl(val, uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -615,7 +623,7 @@ static inline void uhci_writel(const struct uhci_hcd *uhci, u32 val, int reg)
static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
- return inw(uhci->io_addr + reg);
+ return UHCI_IN(inw(uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -629,7 +637,7 @@ static inline u16 uhci_readw(const struct uhci_hcd *uhci, int reg)
static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
{
if (uhci_has_pci_registers(uhci))
- outw(val, uhci->io_addr + reg);
+ UHCI_OUT(outw(val, uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -643,7 +651,7 @@ static inline void uhci_writew(const struct uhci_hcd *uhci, u16 val, int reg)
static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
{
if (uhci_has_pci_registers(uhci))
- return inb(uhci->io_addr + reg);
+ return UHCI_IN(inb(uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
return readl(uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -657,7 +665,7 @@ static inline u8 uhci_readb(const struct uhci_hcd *uhci, int reg)
static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
{
if (uhci_has_pci_registers(uhci))
- outb(val, uhci->io_addr + reg);
+ UHCI_OUT(outb(val, uhci->io_addr + reg));
else if (uhci_is_aspeed(uhci))
writel(val, uhci->regs + uhci_aspeed_reg(reg));
#ifdef CONFIG_USB_UHCI_BIG_ENDIAN_MMIO
@@ -668,6 +676,8 @@ static inline void uhci_writeb(const struct uhci_hcd *uhci, u8 val, int reg)
writeb(val, uhci->regs + reg);
}
#endif /* CONFIG_USB_UHCI_SUPPORT_NON_PCI_HC */
+#undef UHCI_IN
+#undef UHCI_OUT
/*
* The GRLIB GRUSBHC controller can use big endian format for its descriptors.
--
2.39.2
next prev parent reply other threads:[~2023-05-22 10:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20230522105049.1467313-1-schnelle@linux.ibm.com>
2023-05-22 10:50 ` [PATCH v5 36/44] usb: add HAS_IOPORT dependencies Niklas Schnelle
2023-05-22 10:50 ` Niklas Schnelle [this message]
2023-05-22 13:57 ` [PATCH v5 37/44] usb: uhci: handle " Alan Stern
2023-05-22 10:50 ` [PATCH v5 38/44] usb: pci-quirks: " Niklas Schnelle
2023-05-29 14:34 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230522105049.1467313-38-schnelle@linux.ibm.com \
--to=schnelle@linux.ibm.com \
--cc=aou@eecs.berkeley.edu \
--cc=arnd@arndb.de \
--cc=arnd@kernel.org \
--cc=bhelgaas@google.com \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=rafael@kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox