From: Wesley Cheng <quic_wcheng@quicinc.com>
To: <mathias.nyman@intel.com>, <gregkh@linuxfoundation.org>,
<lgirdwood@gmail.com>, <broonie@kernel.org>, <perex@perex.cz>,
<tiwai@suse.com>, <agross@kernel.org>, <andersson@kernel.org>,
<konrad.dybcio@linaro.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<srinivas.kandagatla@linaro.org>, <bgoswami@quicinc.com>,
<Thinh.Nguyen@synopsys.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<alsa-devel@alsa-project.org>, <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>,
Wesley Cheng <quic_wcheng@quicinc.com>
Subject: [PATCH v7 04/33] usb: host: xhci-mem: Cleanup pending secondary event ring events
Date: Thu, 21 Sep 2023 14:48:14 -0700 [thread overview]
Message-ID: <20230921214843.18450-5-quic_wcheng@quicinc.com> (raw)
In-Reply-To: <20230921214843.18450-1-quic_wcheng@quicinc.com>
As part of xHCI bus suspend, the XHCI is halted. However, if there are
pending events in the secondary event ring, it is observed that the xHCI
controller stops responding to further commands upon host or device
initiated bus resume. Iterate through all pending events and updating the
dequeue pointer to the last pending event trb.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
drivers/usb/host/xhci-mem.c | 9 ++++---
drivers/usb/host/xhci-ring.c | 46 ++++++++++++++++++++++++++++++++++++
drivers/usb/host/xhci.c | 2 +-
drivers/usb/host/xhci.h | 3 +++
4 files changed, 54 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 2f9228d7d22d..94cbc25e77ca 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1801,7 +1801,6 @@ xhci_free_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
{
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
size_t erst_size;
- u64 tmp64;
u32 tmp;
if (!ir)
@@ -1823,10 +1822,6 @@ xhci_free_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir)
tmp = readl(&ir->ir_set->erst_size);
tmp &= ERST_SIZE_MASK;
writel(tmp, &ir->ir_set->erst_size);
-
- tmp64 = xhci_read_64(xhci, &ir->ir_set->erst_dequeue);
- tmp64 &= (u64) ERST_PTR_MASK;
- xhci_write_64(xhci, tmp64, &ir->ir_set->erst_dequeue);
}
/* free interrrupter event ring */
@@ -1851,6 +1846,10 @@ void xhci_remove_secondary_interrupter(struct usb_hcd *hcd, struct xhci_interrup
/* fixme, should we check xhci->interrupter[intr_num] == ir */
spin_lock(&xhci->lock);
intr_num = ir->intr_num;
+
+ /* cleanup secondary interrupter to ensure there are no pending events */
+ xhci_skip_sec_intr_events(xhci, ir->event_ring, ir);
+
xhci_free_interrupter(xhci, ir);
xhci->interrupters[intr_num] = NULL;
spin_unlock(&xhci->lock);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 93233cf5ff21..fdef1b82b1ff 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3026,6 +3026,52 @@ static void xhci_update_erst_dequeue(struct xhci_hcd *xhci,
xhci_write_64(xhci, temp_64, &ir->ir_set->erst_dequeue);
}
+/*
+ * Move the event ring dequeue pointer to skip events kept in the secondary
+ * event ring. This is used to ensure that pending events in the ring are
+ * acknowledged, so the XHCI HCD can properly enter suspend/resume. The
+ * secondary ring is typically maintained by an external component.
+ */
+void xhci_skip_sec_intr_events(struct xhci_hcd *xhci,
+ struct xhci_ring *ring, struct xhci_interrupter *ir)
+{
+ union xhci_trb *erdp_trb, *current_trb;
+ struct xhci_segment *seg;
+ u64 erdp_reg;
+ u32 iman_reg;
+ dma_addr_t deq;
+ unsigned long segment_offset;
+
+ /* disable irq, ack pending interrupt and ack all pending events */
+ xhci_disable_interrupter(ir);
+ iman_reg = readl_relaxed(&ir->ir_set->irq_pending);
+ if (iman_reg & IMAN_IP)
+ writel_relaxed(iman_reg, &ir->ir_set->irq_pending);
+
+ /* last acked event trb is in erdp reg */
+ erdp_reg = xhci_read_64(xhci, &ir->ir_set->erst_dequeue);
+ deq = (dma_addr_t)(erdp_reg & ~ERST_PTR_MASK);
+ if (!deq) {
+ xhci_dbg(xhci, "event ring handling not required\n");
+ return;
+ }
+
+ seg = ring->first_seg;
+ segment_offset = deq - seg->dma;
+
+ erdp_trb = current_trb = ir->event_ring->dequeue;
+ while (1) {
+ inc_deq(xhci, ir->event_ring);
+ erdp_trb = ir->event_ring->dequeue;
+ /* cycle state transition */
+ if ((le32_to_cpu(erdp_trb->event_cmd.flags) & TRB_CYCLE) !=
+ ring->cycle_state)
+ break;
+ }
+
+ xhci_update_erst_dequeue(xhci, ir, current_trb);
+}
+
/*
* xHCI spec says we can get an interrupt, and if the HC has an error condition,
* we might get bad data out of the event ring. Section 4.10.2.7 has a list of
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 163d533d6200..2bb7895c1cd6 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -309,7 +309,7 @@ static int xhci_enable_interrupter(struct xhci_interrupter *ir)
return 0;
}
-static int xhci_disable_interrupter(struct xhci_interrupter *ir)
+int xhci_disable_interrupter(struct xhci_interrupter *ir)
{
u32 iman;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 15ade8ec6b6c..e2133f125974 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2029,6 +2029,9 @@ struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
int type, gfp_t flags);
void xhci_free_container_ctx(struct xhci_hcd *xhci,
struct xhci_container_ctx *ctx);
+void xhci_skip_sec_intr_events(struct xhci_hcd *xhci,
+ struct xhci_ring *ring, struct xhci_interrupter *ir);
+int xhci_disable_interrupter(struct xhci_interrupter *ir);
/* xHCI host controller glue */
typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
next prev parent reply other threads:[~2023-09-21 21:49 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-21 21:48 [PATCH v7 00/33] Introduce QC USB SND audio offloading support Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 01/33] xhci: add support to allocate several interrupters Wesley Cheng
2023-09-28 10:31 ` Mathias Nyman
2023-10-02 20:07 ` Wesley Cheng
2023-10-04 14:02 ` Mathias Nyman
2023-10-04 18:35 ` Wesley Cheng
2023-10-04 23:42 ` Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 02/33] xhci: add helper to stop endpoint and wait for completion Wesley Cheng
2023-09-28 13:31 ` Mathias Nyman
2023-09-28 22:10 ` Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 03/33] xhci: sideband: add initial api to register a sideband entity Wesley Cheng
2023-09-21 21:48 ` Wesley Cheng [this message]
2023-09-21 21:48 ` [PATCH v7 05/33] usb: host: xhci-mem: Allow for interrupter clients to choose specific index Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 06/33] ASoC: Add SOC USB APIs for adding an USB backend Wesley Cheng
2023-09-27 14:48 ` Mark Brown
2023-09-27 19:57 ` Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 07/33] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 08/33] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 09/33] ASoC: qdsp6: q6afe: Increase APR timeout Wesley Cheng
2023-09-27 14:50 ` Mark Brown
2023-09-27 20:01 ` Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 10/33] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6 Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 11/33] ALSA: usb-audio: Introduce USB SND platform op callbacks Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 12/33] ALSA: usb-audio: Export USB SND APIs for modules Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 13/33] dt-bindings: usb: dwc3: Limit num-hc-interrupters definition Wesley Cheng
2023-09-25 15:32 ` Rob Herring
2023-09-21 21:48 ` [PATCH v7 14/33] dt-bindings: usb: xhci: Add " Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 15/33] usb: dwc3: Specify maximum number of XHCI interrupters Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 16/33] usb: host: xhci-plat: Set XHCI max interrupters if property is present Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 17/33] ALSA: usb-audio: qcom: Add USB QMI definitions Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 18/33] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 19/33] ALSA: usb-audio: Check for support for requested audio format Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 20/33] ASoC: usb: Add PCM format check API for USB backend Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 21/33] ASoC: qcom: qdsp6: Ensure PCM format is supported by USB audio device Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 22/33] ALSA: usb-audio: Prevent starting of audio stream if in use Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 23/33] ASoC: dt-bindings: Add Q6USB backend Wesley Cheng
2023-09-25 15:34 ` Rob Herring
2023-09-21 21:48 ` [PATCH v7 24/33] ASoC: dt-bindings: Update example for enabling USB offload on SM8250 Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 25/33] ASoC: qcom: qdsp6: q6afe: Split USB AFE dev_token param into separate API Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 26/33] ALSA: usb-audio: qcom: Populate PCM and USB chip information Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 27/33] ASoC: qcom: qdsp6: Add support to track available USB PCM devices Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 28/33] ASoC: qcom: qdsp6: Add SND kcontrol to select offload device Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 29/33] ASoC: qcom: qdsp6: Add SND kcontrol for fetching offload status Wesley Cheng
2023-09-27 15:02 ` Mark Brown
2023-09-27 20:10 ` Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 30/33] ASoC: qcom: qdsp6: Add headphone jack for offload connection status Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 31/33] ALSA: usb-audio: qcom: Use card and PCM index from QMI request Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 32/33] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices Wesley Cheng
2023-09-21 21:48 ` [PATCH v7 33/33] ASoC: usb: Rediscover USB SND devices on USB port add Wesley Cheng
2023-09-27 15:04 ` [PATCH v7 00/33] Introduce QC USB SND audio offloading support Mark Brown
2023-09-27 15:46 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230921214843.18450-5-quic_wcheng@quicinc.com \
--to=quic_wcheng@quicinc.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=agross@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=andersson@kernel.org \
--cc=bgoswami@quicinc.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox