[PATCH RFC v2 5/6] ARM: pxa: Convert Spitz hsync to GPIO descriptors

["Duje Mihanović" <duje.mihanovic@skole.hr>]

Sharp's Spitz still uses the legacy GPIO interface in its
wait_for_hsync() function.

Convert it to use the GPIO descriptor interface.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 arch/arm/mach-pxa/spitz.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 94bcb187713b..5c8f497b71ec 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -520,12 +520,14 @@ static inline void spitz_leds_init(void) {}
  * SSP Devices
  ******************************************************************************/
 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct gpio_desc *hsync = NULL;
+
 static void spitz_ads7846_wait_for_hsync(void)
 {
-	while (gpio_get_value(SPITZ_GPIO_HSYNC))
+	while (gpiod_get_value(hsync))
 		cpu_relax();
 
-	while (!gpio_get_value(SPITZ_GPIO_HSYNC))
+	while (!gpiod_get_value(hsync))
 		cpu_relax();
 }
 
@@ -543,6 +545,8 @@ static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
 	.table = {
 		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_TP_INT,
 			    "pendown", GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_HSYNC,
+			    "hsync", GPIO_ACTIVE_LOW),
 		{ }
 	},
 };
@@ -622,6 +626,11 @@ static void __init spitz_spi_init(void)
 
 	gpiod_add_lookup_table(&spitz_ads7846_gpio_table);
 	gpiod_add_lookup_table(&spitz_spi_gpio_table);
+	hsync = gpiod_get(NULL, "hsync", GPIOD_IN);
+	if (IS_ERR(hsync)) {
+		pr_err("Failed to get hsync GPIO: %ld\n", PTR_ERR(hsync));
+		return;
+	}
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
 }

-- 
2.42.0