[PATCH AUTOSEL 6.6 15/18] usb: host: xhci: Avoid XHCI resume delay if SSUSB device is not present

[Sasha Levin <sashal@kernel.org>]

From: Wesley Cheng <quic_wcheng@quicinc.com>

[ Upstream commit 6add6dd345cb754ce18ff992c7264cabf31e59f6 ]

There is a 120ms delay implemented for allowing the XHCI host controller to
detect a U3 wakeup pulse.  The intention is to wait for the device to retry
the wakeup event if the USB3 PORTSC doesn't reflect the RESUME link status
by the time it is checked.  As per the USB3 specification:

  tU3WakeupRetryDelay ("Table 7-12. LTSSM State Transition Timeouts")

This would allow the XHCI resume sequence to determine if the root hub
needs to be also resumed.  However, in case there is no device connected,
or if there is only a HSUSB device connected, this delay would still affect
the overall resume timing.

Since this delay is solely for detecting U3 wake events (USB3 specific)
then ignore this delay for the disconnected case and the HSUSB connected
only case.

[skip helper function, rename usb3_connected variable -Mathias ]

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-20-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index e1b1b64a07232..132b76fa7ca60 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -968,6 +968,7 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg)
 	int			retval = 0;
 	bool			comp_timer_running = false;
 	bool			pending_portevent = false;
+	bool			suspended_usb3_devs = false;
 	bool			reinit_xhc = false;
 
 	if (!hcd->state)
@@ -1115,10 +1116,17 @@ int xhci_resume(struct xhci_hcd *xhci, pm_message_t msg)
 		/*
 		 * Resume roothubs only if there are pending events.
 		 * USB 3 devices resend U3 LFPS wake after a 100ms delay if
-		 * the first wake signalling failed, give it that chance.
+		 * the first wake signalling failed, give it that chance if
+		 * there are suspended USB 3 devices.
 		 */
+		if (xhci->usb3_rhub.bus_state.suspended_ports ||
+		    xhci->usb3_rhub.bus_state.bus_suspended)
+			suspended_usb3_devs = true;
+
 		pending_portevent = xhci_pending_portevent(xhci);
-		if (!pending_portevent && msg.event == PM_EVENT_AUTO_RESUME) {
+
+		if (suspended_usb3_devs && !pending_portevent &&
+		    msg.event == PM_EVENT_AUTO_RESUME) {
 			msleep(120);
 			pending_portevent = xhci_pending_portevent(xhci);
 		}
-- 
2.42.0