From: Alexandru Ardelean <alex@shruggie.ro>
To: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Cc: heikki.krogerus@linux.intel.com, gregkh@linuxfoundation.org,
rogerq@kernel.org, christophe.jaillet@wanadoo.fr,
a-govindraju@ti.com, trix@redhat.com, abdelalkuor@geotab.com,
Alexandru Ardelean <alex@shruggie.ro>
Subject: [PATCH] USB: typec: tps6598x: use device 'type' field to identify devices
Date: Thu, 23 Nov 2023 23:00:21 +0200 [thread overview]
Message-ID: <20231123210021.463122-1-alex@shruggie.ro> (raw)
Using the {of_}device_is_compatible function(s) is not too expensive.
But since the driver already needs to match for the 'struct tipd_data'
device parameters (via device_get_match_data()), we can add a simple 'type'
field.
This adds a minor optimization in certain operations, where we the check
for TPS25750 (or Apple CD321X) is a bit faster.
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
---
drivers/usb/typec/tipd/core.c | 34 ++++++++++++++++++++++------------
1 file changed, 22 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index fbd23de5c5cb..69d3e11bb30c 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -105,7 +105,14 @@ static const char *const modes[] = {
struct tps6598x;
+enum tipd_type {
+ TIPD_TYPE_TI_TPS6598X,
+ TIPD_TYPE_APPLE_CD321X,
+ TIPD_TYPE_TI_TPS25750X,
+};
+
struct tipd_data {
+ enum tipd_type type;
irq_handler_t irq_handler;
int (*register_port)(struct tps6598x *tps, struct fwnode_handle *node);
void (*trace_power_status)(u16 status);
@@ -1195,7 +1202,6 @@ tps25750_register_port(struct tps6598x *tps, struct fwnode_handle *fwnode)
static int tps6598x_probe(struct i2c_client *client)
{
- struct device_node *np = client->dev.of_node;
struct tps6598x *tps;
struct fwnode_handle *fwnode;
u32 status;
@@ -1211,11 +1217,19 @@ static int tps6598x_probe(struct i2c_client *client)
mutex_init(&tps->lock);
tps->dev = &client->dev;
+ if (dev_fwnode(tps->dev))
+ tps->data = device_get_match_data(tps->dev);
+ else
+ tps->data = i2c_get_match_data(client);
+
+ if (!tps->data)
+ return -EINVAL;
+
tps->regmap = devm_regmap_init_i2c(client, &tps6598x_regmap_config);
if (IS_ERR(tps->regmap))
return PTR_ERR(tps->regmap);
- is_tps25750 = device_is_compatible(tps->dev, "ti,tps25750");
+ is_tps25750 = (tps->data->type == TIPD_TYPE_TI_TPS25750X);
if (!is_tps25750) {
ret = tps6598x_read32(tps, TPS_REG_VID, &vid);
if (ret < 0 || !vid)
@@ -1229,7 +1243,7 @@ static int tps6598x_probe(struct i2c_client *client)
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
tps->i2c_protocol = true;
- if (np && of_device_is_compatible(np, "apple,cd321x")) {
+ if (tps->data->type == TIPD_TYPE_APPLE_CD321X) {
/* Switch CD321X chips to the correct system power state */
ret = cd321x_switch_power_state(tps, TPS_SYSTEM_POWER_STATE_S0);
if (ret)
@@ -1247,13 +1261,6 @@ static int tps6598x_probe(struct i2c_client *client)
TPS_REG_INT_PLUG_EVENT;
}
- if (dev_fwnode(tps->dev))
- tps->data = device_get_match_data(tps->dev);
- else
- tps->data = i2c_get_match_data(client);
- if (!tps->data)
- return -EINVAL;
-
/* Make sure the controller has application firmware running */
ret = tps6598x_check_mode(tps);
if (ret < 0)
@@ -1366,7 +1373,7 @@ static void tps6598x_remove(struct i2c_client *client)
usb_role_switch_put(tps->role_sw);
/* Reset PD controller to remove any applied patch */
- if (device_is_compatible(tps->dev, "ti,tps25750"))
+ if (tps->data->type == TIPD_TYPE_TI_TPS25750X)
tps6598x_exec_cmd_tmo(tps, "GAID", 0, NULL, 0, NULL, 2000, 0);
}
@@ -1396,7 +1403,7 @@ static int __maybe_unused tps6598x_resume(struct device *dev)
if (ret < 0)
return ret;
- if (device_is_compatible(tps->dev, "ti,tps25750") && ret == TPS_MODE_PTCH) {
+ if (tps->data->type == TIPD_TYPE_TI_TPS25750X && ret == TPS_MODE_PTCH) {
ret = tps25750_init(tps);
if (ret)
return ret;
@@ -1419,6 +1426,7 @@ static const struct dev_pm_ops tps6598x_pm_ops = {
};
static const struct tipd_data cd321x_data = {
+ .type = TIPD_TYPE_APPLE_CD321X,
.irq_handler = cd321x_interrupt,
.register_port = tps6598x_register_port,
.trace_power_status = trace_tps6598x_power_status,
@@ -1426,6 +1434,7 @@ static const struct tipd_data cd321x_data = {
};
static const struct tipd_data tps6598x_data = {
+ .type = TIPD_TYPE_TI_TPS6598X,
.irq_handler = tps6598x_interrupt,
.register_port = tps6598x_register_port,
.trace_power_status = trace_tps6598x_power_status,
@@ -1433,6 +1442,7 @@ static const struct tipd_data tps6598x_data = {
};
static const struct tipd_data tps25750_data = {
+ .type = TIPD_TYPE_TI_TPS25750X,
.irq_handler = tps25750_interrupt,
.register_port = tps25750_register_port,
.trace_power_status = trace_tps25750_power_status,
--
2.42.1
next reply other threads:[~2023-11-23 21:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-23 21:00 Alexandru Ardelean [this message]
2023-11-29 14:26 ` [PATCH] USB: typec: tps6598x: use device 'type' field to identify devices Heikki Krogerus
2023-11-29 18:45 ` Alexandru Ardelean
2023-11-30 9:13 ` Roger Quadros
2023-11-30 10:54 ` Heikki Krogerus
2023-11-30 13:30 ` Roger Quadros
2023-12-01 8:10 ` Heikki Krogerus
2023-12-01 10:57 ` Roger Quadros
2023-12-01 12:12 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231123210021.463122-1-alex@shruggie.ro \
--to=alex@shruggie.ro \
--cc=a-govindraju@ti.com \
--cc=abdelalkuor@geotab.com \
--cc=christophe.jaillet@wanadoo.fr \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=rogerq@kernel.org \
--cc=trix@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox