Re: [Patch v2 2/2] thunderbolt: Teardown tunnels and reset downstream ports created by boot firmware

[Mika Westerberg <mika.westerberg@linux.intel.com>]

On Wed, Dec 13, 2023 at 07:49:14AM +0200, Mika Westerberg wrote:
> On Wed, Dec 13, 2023 at 12:46:35AM +0530, Sanath S wrote:
> > Boot firmware might have created tunnels of its own. Since we cannot
> > be sure they are usable for us. Tear them down and reset the ports
> > to handle it as a new hotplug for USB3 routers.
> > 
> > Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
> > Signed-off-by: Sanath S <Sanath.S@amd.com>
> > ---
> >  drivers/thunderbolt/tb.c | 11 +++++++++++
> >  1 file changed, 11 insertions(+)
> > 
> > diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
> > index fd49f86e0353..febd0b6972e3 100644
> > --- a/drivers/thunderbolt/tb.c
> > +++ b/drivers/thunderbolt/tb.c
> > @@ -2598,6 +2598,17 @@ static int tb_start(struct tb *tb)
> >  	tb_switch_tmu_enable(tb->root_switch);
> >  	/* Full scan to discover devices added before the driver was loaded. */
> >  	tb_scan_switch(tb->root_switch);
> > +	/*
> > +	 * Boot firmware might have created tunnels of its own. Since we cannot
> > +	 * be sure they are usable for us, Tear them down and reset the ports
> > +	 * to handle it as new hotplug for USB4 routers.
> > +	 */
> > +	if (tb_switch_is_usb4(tb->root_switch)) {
> > +		tb_switch_discover_tunnels(tb->root_switch,
> > +					   &tcm->tunnel_list, false);
> 
> Why this is needed?
> 
> It should be enough, to do simply something like this:
> 
> 	if (tb_switch_is_usb4(tb->root_switch))
> 		tb_switch_reset(tb->root_switch);

Actually this needs to be done only for USB4 v1 routers since we already
reset USB4 v2 hosts so something like:

	/*
	 * Reset USB4 v1 host router to get rid of possible tunnels the
	 * boot firmware created. This makes sure all the tunnels are
	 * created by us and thus have known configuration.
	 *
	 * For USB4 v2 and beyond we do this in nhi_reset() using the
	 * host router reset interface.
	 */
	if (usb4_switch_version(tb->root_switch) == 1)
		tb_switch_reset(tb->root_switch);

(possibly add similar comment to the nhi_reset() to refer this one).