public inbox for linux-usb@vger.kernel.org
 help / color / mirror / Atom feed
From: Peter Chen <peter.chen@kernel.org>
To: Xu Yang <xu.yang_2@nxp.com>
Cc: gregkh@linuxfoundation.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	luca.ceresoli@bootlin.com, jun.li@nxp.com,
	linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 1/3] usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always on
Date: Fri, 22 Dec 2023 11:40:26 +0800	[thread overview]
Message-ID: <20231222034026.GA1951375@nchen-desktop> (raw)
In-Reply-To: <20231218061420.3460145-1-xu.yang_2@nxp.com>

On 23-12-18 14:14:18, Xu Yang wrote:
> Some platform using ChipIdea IP  may keep 32KHz wakeup clock always
> on without usb driver intervention. And some may need driver to handle
> this clock. For now only i.MX93 needs this wakeup clock. This patch will
> get wakeup clock and keep it always on to make controller work properly.
> 
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> 
> ---
> Changes in v2:
>  - modify commit msg to make it clear
> ---
>  drivers/usb/chipidea/ci_hdrc_imx.c | 22 +++++++++++++++++++++-
>  1 file changed, 21 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index e28bb2f2612d..4330be8240ff 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -96,6 +96,7 @@ struct ci_hdrc_imx_data {
>  	struct usb_phy *phy;
>  	struct platform_device *ci_pdev;
>  	struct clk *clk;
> +	struct clk *clk_wakeup;
>  	struct imx_usbmisc_data *usbmisc_data;
>  	bool supports_runtime_pm;
>  	bool override_phy_control;
> @@ -199,7 +200,7 @@ static int imx_get_clks(struct device *dev)
>  
>  	data->clk_ipg = devm_clk_get(dev, "ipg");
>  	if (IS_ERR(data->clk_ipg)) {
> -		/* If the platform only needs one clocks */
> +		/* If the platform only needs one primary clock */
>  		data->clk = devm_clk_get(dev, NULL);
>  		if (IS_ERR(data->clk)) {
>  			ret = PTR_ERR(data->clk);
> @@ -208,6 +209,18 @@ static int imx_get_clks(struct device *dev)
>  				PTR_ERR(data->clk), PTR_ERR(data->clk_ipg));
>  			return ret;
>  		}
> +		/* Get wakeup clock. Not all of the platforms need to
> +		 * handle this clock. So make it optional.
> +		 */
> +		data->clk_wakeup = devm_clk_get_optional(dev,
> +							 "usb_wakeup_clk");
> +		if (IS_ERR(data->clk_wakeup)) {
> +			ret = PTR_ERR(data->clk_wakeup);
> +			dev_err(dev,
> +				"Failed to get wakeup clk, err=%ld\n",
> +				PTR_ERR(data->clk_wakeup));
> +			return ret;
> +		}
>  		return ret;
>  	}
>  
> @@ -423,6 +436,10 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto disable_hsic_regulator;
>  
> +	ret = clk_prepare_enable(data->clk_wakeup);
> +	if (ret)
> +		goto err_wakeup_clk;
> +

Better add at function imx_prepare_enable_clks()

>  	data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0);
>  	if (IS_ERR(data->phy)) {
>  		ret = PTR_ERR(data->phy);
> @@ -504,6 +521,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>  disable_device:
>  	ci_hdrc_remove_device(data->ci_pdev);
>  err_clk:
> +	clk_disable_unprepare(data->clk_wakeup);
> +err_wakeup_clk:


Better add clk_disable_unprepare for wakeup clk at function
imx_disable_unprepare_clks();

Peter

>  	imx_disable_unprepare_clks(dev);
>  disable_hsic_regulator:
>  	if (data->hsic_pad_regulator)
> @@ -530,6 +549,7 @@ static void ci_hdrc_imx_remove(struct platform_device *pdev)
>  		usb_phy_shutdown(data->phy);
>  	if (data->ci_pdev) {
>  		imx_disable_unprepare_clks(&pdev->dev);
> +		clk_disable_unprepare(data->clk_wakeup);
>  		if (data->plat_data->flags & CI_HDRC_PMQOS)
>  			cpu_latency_qos_remove_request(&data->pm_qos_req);
>  		if (data->hsic_pad_regulator)
> -- 
> 2.34.1
> 
> 

-- 

Thanks,
Peter Chen

  parent reply	other threads:[~2023-12-22  3:40 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-18  6:14 [PATCH v2 1/3] usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always on Xu Yang
2023-12-18  6:14 ` [PATCH v2 2/3] usb: chipidea: wait controller resume finished for wakeup irq Xu Yang
2023-12-22  3:41   ` Peter Chen
2023-12-18  6:14 ` [PATCH v2 3/3] usb: phy: mxs: remove CONFIG_USB_OTG condition for mxs_phy_is_otg_host() Xu Yang
2023-12-22  9:28   ` Peter Chen
2023-12-22  3:40 ` Peter Chen [this message]
2023-12-22  8:24   ` [EXT] Re: [PATCH v2 1/3] usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always on Xu Yang
2023-12-22  9:25 ` Peter Chen
2023-12-22 12:26 ` Stefan Wahren
2023-12-25  2:20   ` [EXT] " Xu Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231222034026.GA1951375@nchen-desktop \
    --to=peter.chen@kernel.org \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jun.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=luca.ceresoli@bootlin.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=xu.yang_2@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox