Linux USB
 help / color / mirror / Atom feed
From: Elad Nachman <enachman@marvell.com>
To: <gregkh@linuxfoundation.org>,
	rowland.harvard.edu@mx0b-0016f401.pphosted.com,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<conor+dt@kernel.org>, <devicetree@vger.kernel.org>,
	<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <enachman@marvell.com>
Subject: [PATCH v3 2/2] usb: host: Add ac5 to EHCI Orion
Date: Tue, 9 Jan 2024 10:10:44 +0200	[thread overview]
Message-ID: <20240109081044.10515-3-enachman@marvell.com> (raw)
In-Reply-To: <20240109081044.10515-1-enachman@marvell.com>

From: Elad Nachman <enachman@marvell.com>

Add support for ac5 to the EHCI Orion platform driver.
The ac5 SOC has DDR starting at offset 0x2_0000_0000,
Hence it requires a larger than 32-bit DMA mask to operate.
Move the dma mask to be pointed by the OF match data, and
use that match data when initializng the DMA mask.

Signed-off-by: Elad Nachman <enachman@marvell.com>
---
 drivers/usb/host/ehci-orion.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 6c47ab0a491d..58883664c884 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -65,6 +65,15 @@ struct orion_ehci_hcd {
 
 static struct hc_driver __read_mostly ehci_orion_hc_driver;
 
+/*
+ * Legacy DMA mask is 32 bit.
+ * AC5 has the DDR starting at 8GB, hence it requires
+ * a larger (34-bit) DMA mask, in order for DMA allocations
+ * to succeed:
+ */
+static const u64 dma_mask_orion =	DMA_BIT_MASK(32);
+static const u64 dma_mask_ac5 =		DMA_BIT_MASK(34);
+
 /*
  * Implement Orion USB controller specification guidelines
  */
@@ -211,6 +220,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
 	int irq, err;
 	enum orion_ehci_phy_ver phy_version;
 	struct orion_ehci_hcd *priv;
+	u64 *dma_mask_ptr;
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -228,7 +238,8 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
 	 * set. Since shared usb code relies on it, set it here for
 	 * now. Once we have dma capability bindings this can go away.
 	 */
-	err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+	dma_mask_ptr = (u64 *)of_device_get_match_data(&pdev->dev);
+	err = dma_coerce_mask_and_coherent(&pdev->dev, *dma_mask_ptr);
 	if (err)
 		goto err;
 
@@ -332,9 +343,9 @@ static void ehci_orion_drv_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id ehci_orion_dt_ids[] = {
-	{ .compatible = "marvell,orion-ehci", },
-	{ .compatible = "marvell,armada-3700-ehci", },
-	{},
+	{ .compatible = "marvell,orion-ehci", .data = &dma_mask_orion},
+	{ .compatible = "marvell,armada-3700-ehci", .data = &dma_mask_orion},
+	{ .compatible = "marvell,ac5-ehci", .data = &dma_mask_ac5},
 };
 MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids);
 
-- 
2.25.1


      parent reply	other threads:[~2024-01-09  8:11 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-09  8:10 [PATCH v3 0/2] usb: host: Add ac5 to EHCI Orion Elad Nachman
2024-01-09  8:10 ` [PATCH v3 1/2] dt-bindings: usb: Add Marvell ac5 Elad Nachman
2024-01-09 16:20   ` Conor Dooley
2024-01-09  8:10 ` Elad Nachman [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240109081044.10515-3-enachman@marvell.com \
    --to=enachman@marvell.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=rowland.harvard.edu@mx0b-0016f401.pphosted.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox