Re: [PATCH v20 9/9] usb: dwc3: qcom: Add multiport suspend/resume support for wrapper

[Thinh Nguyen <Thinh.Nguyen@synopsys.com>]

On Mon, Apr 08, 2024, Krishna Kurapati wrote:
> Power event IRQ is used for wakeup in cases:
> a) where the controller is super speed capable and missing an
> ss_phy interrupt.
> b) where the GIC is not capable of detecting DP/DM hs phy irq's.
> 
> Power event IRQ stat register indicates whether high speed phy
> entered and exited L2 successfully during suspend and resume.
> Indicate the same for all ports of multiport.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>  drivers/usb/dwc3/dwc3-qcom.c | 22 +++++++++++++++++-----
>  1 file changed, 17 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 12182e0f8f45..d3e6d5d5e8bf 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -52,6 +52,13 @@
>  #define APPS_USB_AVG_BW 0
>  #define APPS_USB_PEAK_BW MBps_to_icc(40)
>  
> +static const u32 pwr_evnt_irq_stat_reg[DWC3_MAX_PORTS] = {

DWC3_MAX_PORTS is not qcom specific. For qcom specific max ports, please
create your own macro here.

> +	0x58,
> +	0x1dc,
> +	0x228,
> +	0x238,
> +};
> +
>  struct dwc3_qcom_port {
>  	int			qusb2_phy_irq;
>  	int			dp_hs_phy_irq;
> @@ -421,9 +428,11 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
>  	if (qcom->is_suspended)
>  		return 0;
>  
> -	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
> -	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
> -		dev_err(qcom->dev, "HS-PHY not in L2\n");
> +	for (i = 0; i < qcom->num_ports; i++) {
> +		val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg[i]);
> +		if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
> +			dev_err(qcom->dev, "port-%d HS-PHY not in L2\n", i + 1);
> +	}
>  
>  	for (i = qcom->num_clocks - 1; i >= 0; i--)
>  		clk_disable_unprepare(qcom->clks[i]);
> @@ -472,8 +481,11 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup)
>  		dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
>  
>  	/* Clear existing events from PHY related to L2 in/out */
> -	dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
> -			  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
> +	for (i = 0; i < qcom->num_ports; i++) {
> +		dwc3_qcom_setbits(qcom->qscratch_base,
> +				  pwr_evnt_irq_stat_reg[i],
> +				  PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
> +	}
>  
>  	qcom->is_suspended = false;
>  
> -- 
> 2.34.1
> 

Whether or not you decided to create v21:

Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

Thanks,
Thinh