From: Peter Chen <peter.chen@kernel.org>
To: Ravi Gunasekaran <r-gunasekaran@ti.com>
Cc: pawell@cadence.com, rogerq@kernel.org,
gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, srk@ti.com
Subject: Re: [PATCH v3 1/2] usb: cdns3: Add quirk flag to enable suspend residency
Date: Fri, 17 May 2024 10:20:38 +0800 [thread overview]
Message-ID: <20240517022038.GA3458484@nchen-desktop> (raw)
In-Reply-To: <20240516044537.16801-2-r-gunasekaran@ti.com>
On 24-05-16 10:15:36, Ravi Gunasekaran wrote:
> From: Roger Quadros <rogerq@kernel.org>
>
> Some platforms (e.g. ti,j721e-usb, ti,am64-usb) require
> this bit to be set to workaround a lockup issue with PHY
> short suspend intervals [1]. Add a platform quirk flag
> to indicate if Suspend Residency should be enabled.
>
> [1] - https://www.ti.com/lit/er/sprz457h/sprz457h.pdf
> i2409 - USB: USB2 PHY locks up due to short suspend
>
> Signed-off-by: Roger Quadros <rogerq@kernel.org>
> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
> ---
> Change log:
> ----------
> Changes since v2:
> ----------------
> * Fixed the redundant blank line added in v2
>
> Changes since v1:
> ----------------
> * Grouped the susp_ctrl register update along with
> existing CDNS3 snippet as suggested by Peter Chen
>
> v2: https://lore.kernel.org/all/20240516042845.31211-1-r-gunasekaran@ti.com/
> v1: https://lore.kernel.org/all/20240514092421.20897-1-r-gunasekaran@ti.com/#t
>
> drivers/usb/cdns3/core.h | 1 +
> drivers/usb/cdns3/drd.c | 10 +++++++++-
> drivers/usb/cdns3/drd.h | 3 +++
> 3 files changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
> index 81a9c9d6be08..57d47348dc19 100644
> --- a/drivers/usb/cdns3/core.h
> +++ b/drivers/usb/cdns3/core.h
> @@ -44,6 +44,7 @@ struct cdns3_platform_data {
> bool suspend, bool wakeup);
> unsigned long quirks;
> #define CDNS3_DEFAULT_PM_RUNTIME_ALLOW BIT(0)
> +#define CDNS3_DRD_SUSPEND_RESIDENCY_ENABLE BIT(1)
> };
>
> /**
> diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
> index 8b936a2e93a0..84fb38a5723a 100644
> --- a/drivers/usb/cdns3/drd.c
> +++ b/drivers/usb/cdns3/drd.c
> @@ -389,7 +389,7 @@ static irqreturn_t cdns_drd_irq(int irq, void *data)
> int cdns_drd_init(struct cdns *cdns)
> {
> void __iomem *regs;
> - u32 state;
> + u32 state, reg;
> int ret;
>
> regs = devm_ioremap_resource(cdns->dev, &cdns->otg_res);
> @@ -433,6 +433,14 @@ int cdns_drd_init(struct cdns *cdns)
> cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem *)
> &cdns->otg_v1_regs->ien;
> writel(1, &cdns->otg_v1_regs->simulate);
> +
> + if (cdns->pdata &&
> + (cdns->pdata->quirks & CDNS3_DRD_SUSPEND_RESIDENCY_ENABLE)) {
> + reg = readl(&cdns->otg_v1_regs->susp_ctrl);
> + reg |= SUSP_CTRL_SUSPEND_RESIDENCY_ENABLE;
> + writel(reg, &cdns->otg_v1_regs->susp_ctrl);
> + }
> +
> cdns->version = CDNS3_CONTROLLER_V1;
Acked-by: Peter Chen <peter.chen@kernel.org>
Peter
> } else {
> dev_err(cdns->dev, "not supported DID=0x%08x\n", state);
> diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h
> index d72370c321d3..1e2aee14d629 100644
> --- a/drivers/usb/cdns3/drd.h
> +++ b/drivers/usb/cdns3/drd.h
> @@ -193,6 +193,9 @@ struct cdns_otg_irq_regs {
> /* OTGREFCLK - bitmasks */
> #define OTGREFCLK_STB_CLK_SWITCH_EN BIT(31)
>
> +/* SUPS_CTRL - bitmasks */
> +#define SUSP_CTRL_SUSPEND_RESIDENCY_ENABLE BIT(17)
> +
> /* OVERRIDE - bitmasks */
> #define OVERRIDE_IDPULLUP BIT(0)
> /* Only for CDNS3_CONTROLLER_V0 version */
> --
> 2.17.1
>
--
Thanks,
Peter Chen
next prev parent reply other threads:[~2024-05-17 2:20 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-16 4:45 [PATCH v3 0/2] TI AM64/J7: USB Errata i2409 workaround Ravi Gunasekaran
2024-05-16 4:45 ` [PATCH v3 1/2] usb: cdns3: Add quirk flag to enable suspend residency Ravi Gunasekaran
2024-05-17 2:20 ` Peter Chen [this message]
2024-05-16 4:45 ` [PATCH v3 2/2] usb: cdns3-ti: Add workaround for Errata i2409 Ravi Gunasekaran
2024-05-17 2:21 ` Peter Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240517022038.GA3458484@nchen-desktop \
--to=peter.chen@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=pawell@cadence.com \
--cc=r-gunasekaran@ti.com \
--cc=rogerq@kernel.org \
--cc=srk@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox