* [PATCH] usb: chipidea: udc: enable suspend interrupt after usb reset
@ 2024-08-23 7:38 Xu Yang
2024-08-26 1:11 ` Peter Chen
0 siblings, 1 reply; 2+ messages in thread
From: Xu Yang @ 2024-08-23 7:38 UTC (permalink / raw)
To: peter.chen, gregkh; +Cc: linux-usb, imx, jun.li
Currently, suspend interrupt is enabled before pullup enable operation.
This will cause a suspend interrupt assert right after pullup DP. This
suspend interrupt is meaningless, so this will ignore such interrupt
by enable it after usb reset completed.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
drivers/usb/chipidea/udc.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 2d7f616270c1..69ef3cd8d4f8 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -86,7 +86,7 @@ static int hw_device_state(struct ci_hdrc *ci, u32 dma)
hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
/* interrupt, error, port change, reset, sleep/suspend */
hw_write(ci, OP_USBINTR, ~0,
- USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
+ USBi_UI|USBi_UEI|USBi_PCI|USBi_URI);
} else {
hw_write(ci, OP_USBINTR, ~0, 0);
}
@@ -877,6 +877,7 @@ __releases(ci->lock)
__acquires(ci->lock)
{
int retval;
+ u32 intr;
spin_unlock(&ci->lock);
if (ci->gadget.speed != USB_SPEED_UNKNOWN)
@@ -890,6 +891,11 @@ __acquires(ci->lock)
if (retval)
goto done;
+ /* clear SLI */
+ hw_write(ci, OP_USBSTS, USBi_SLI, USBi_SLI);
+ intr = hw_read(ci, OP_USBINTR, ~0);
+ hw_write(ci, OP_USBINTR, ~0, intr | USBi_SLI);
+
ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
if (ci->status == NULL)
retval = -ENOMEM;
--
2.34.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] usb: chipidea: udc: enable suspend interrupt after usb reset
2024-08-23 7:38 [PATCH] usb: chipidea: udc: enable suspend interrupt after usb reset Xu Yang
@ 2024-08-26 1:11 ` Peter Chen
0 siblings, 0 replies; 2+ messages in thread
From: Peter Chen @ 2024-08-26 1:11 UTC (permalink / raw)
To: Xu Yang; +Cc: gregkh, linux-usb, imx, jun.li
On 24-08-23 15:38:32, Xu Yang wrote:
> Currently, suspend interrupt is enabled before pullup enable operation.
> This will cause a suspend interrupt assert right after pullup DP. This
> suspend interrupt is meaningless, so this will ignore such interrupt
> by enable it after usb reset completed.
>
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
> ---
> drivers/usb/chipidea/udc.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> index 2d7f616270c1..69ef3cd8d4f8 100644
> --- a/drivers/usb/chipidea/udc.c
> +++ b/drivers/usb/chipidea/udc.c
> @@ -86,7 +86,7 @@ static int hw_device_state(struct ci_hdrc *ci, u32 dma)
> hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
> /* interrupt, error, port change, reset, sleep/suspend */
> hw_write(ci, OP_USBINTR, ~0,
> - USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
> + USBi_UI|USBi_UEI|USBi_PCI|USBi_URI);
> } else {
> hw_write(ci, OP_USBINTR, ~0, 0);
> }
> @@ -877,6 +877,7 @@ __releases(ci->lock)
> __acquires(ci->lock)
> {
> int retval;
> + u32 intr;
>
> spin_unlock(&ci->lock);
> if (ci->gadget.speed != USB_SPEED_UNKNOWN)
> @@ -890,6 +891,11 @@ __acquires(ci->lock)
> if (retval)
> goto done;
>
> + /* clear SLI */
> + hw_write(ci, OP_USBSTS, USBi_SLI, USBi_SLI);
> + intr = hw_read(ci, OP_USBINTR, ~0);
> + hw_write(ci, OP_USBINTR, ~0, intr | USBi_SLI);
> +
> ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
> if (ci->status == NULL)
> retval = -ENOMEM;
> --
> 2.34.1
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-08-26 1:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-08-23 7:38 [PATCH] usb: chipidea: udc: enable suspend interrupt after usb reset Xu Yang
2024-08-26 1:11 ` Peter Chen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).