From: Peter Chen <peter.chen@kernel.org>
To: Pawel Laszczak <pawell@cadence.com>
Cc: "mathias.nyman@intel.com" <mathias.nyman@intel.com>,
"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"stable@vger.kernel.org" <stable@vger.kernel.org>
Subject: Re: [PATCH v3] usb: xhci: fix loss of data on Cadence xHC
Date: Thu, 5 Sep 2024 15:52:35 +0800 [thread overview]
Message-ID: <20240905075235.GB325295@nchen-desktop> (raw)
In-Reply-To: <PH7PR07MB95386A40146E3EC64086F409DD9D2@PH7PR07MB9538.namprd07.prod.outlook.com>
On 24-09-05 07:03:28, Pawel Laszczak wrote:
> Streams should flush their TRB cache, re-read TRBs, and start executing
> TRBs from the beginning of the new dequeue pointer after a 'Set TR Dequeue
> Pointer' command.
>
> Cadence controllers may fail to start from the beginning of the dequeue
> TRB as it doesn't clear the Opaque 'RsvdO' field of the stream context
> during 'Set TR Dequeue' command. This stream context area is where xHC
> stores information about the last partially executed TD when a stream
> is stopped. xHC uses this information to resume the transfer where it left
> mid TD, when the stream is restarted.
>
> Patch fixes this by clearing out all RsvdO fields before initializing new
> Stream transfer using a 'Set TR Dequeue Pointer' command.
>
> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
> cc: <stable@vger.kernel.org>
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
>
> ---
> Changelog:
> v3:
> - changed patch to patch Cadence specific
>
> v2:
> - removed restoring of EDTLA field
>
> drivers/usb/cdns3/host.c | 4 +++-
> drivers/usb/host/xhci-pci.c | 7 +++++++
> drivers/usb/host/xhci-ring.c | 14 ++++++++++++++
> drivers/usb/host/xhci.h | 1 +
> 4 files changed, 25 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
> index ceca4d839dfd..7ba760ee62e3 100644
> --- a/drivers/usb/cdns3/host.c
> +++ b/drivers/usb/cdns3/host.c
> @@ -62,7 +62,9 @@ static const struct xhci_plat_priv xhci_plat_cdns3_xhci = {
> .resume_quirk = xhci_cdns3_resume_quirk,
> };
>
> -static const struct xhci_plat_priv xhci_plat_cdnsp_xhci;
> +static const struct xhci_plat_priv xhci_plat_cdnsp_xhci = {
> + .quirks = XHCI_CDNS_SCTX_QUIRK,
> +};
>
> static int __cdns_host_init(struct cdns *cdns)
> {
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index b9ae5c2a2527..9199dbfcea07 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -74,6 +74,9 @@
> #define PCI_DEVICE_ID_ASMEDIA_2142_XHCI 0x2142
> #define PCI_DEVICE_ID_ASMEDIA_3242_XHCI 0x3242
>
> +#define PCI_DEVICE_ID_CADENCE 0x17CD
> +#define PCI_DEVICE_ID_CADENCE_SSP 0x0200
> +
> static const char hcd_name[] = "xhci_hcd";
>
> static struct hc_driver __read_mostly xhci_pci_hc_driver;
> @@ -532,6 +535,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
> xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH;
> }
>
> + if (pdev->vendor == PCI_DEVICE_ID_CADENCE &&
> + pdev->device == PCI_DEVICE_ID_CADENCE_SSP)
> + xhci->quirks |= XHCI_CDNS_SCTX_QUIRK;
> +
> /* xHC spec requires PCI devices to support D3hot and D3cold */
> if (xhci->hci_version >= 0x120)
> xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
> diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
> index 1dde53f6eb31..a1ad2658c0c7 100644
> --- a/drivers/usb/host/xhci-ring.c
> +++ b/drivers/usb/host/xhci-ring.c
> @@ -1386,6 +1386,20 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
> struct xhci_stream_ctx *ctx =
> &ep->stream_info->stream_ctx_array[stream_id];
> deq = le64_to_cpu(ctx->stream_ring) & SCTX_DEQ_MASK;
> +
> + /*
> + * Cadence xHCI controllers store some endpoint state
> + * information within Rsvd0 fields of Stream Endpoint
> + * context. This field is not cleared during Set TR
> + * Dequeue Pointer command which causes XDMA to skip
> + * over transfer ring and leads to data loss on stream
> + * pipe.
> + * To fix this issue driver must clear Rsvd0 field.
> + */
> + if (xhci->quirks & XHCI_CDNS_SCTX_QUIRK) {
> + ctx->reserved[0] = 0;
> + ctx->reserved[1] = 0;
> + }
> } else {
> deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK;
> }
> diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> index 101e74c9060f..4cbd58eed214 100644
> --- a/drivers/usb/host/xhci.h
> +++ b/drivers/usb/host/xhci.h
> @@ -1907,6 +1907,7 @@ struct xhci_hcd {
> #define XHCI_ZHAOXIN_TRB_FETCH BIT_ULL(45)
> #define XHCI_ZHAOXIN_HOST BIT_ULL(46)
> #define XHCI_WRITE_64_HI_LO BIT_ULL(47)
> +#define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48)
>
> unsigned int num_active_eps;
> unsigned int limit_active_eps;
> --
> 2.43.0
>
prev parent reply other threads:[~2024-09-05 7:52 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20240905065716.305332-1-pawell@cadence.com>
2024-09-05 7:01 ` FW: [PATCH] usb: xhci: fix loss of data on Cadence xHC Pawel Laszczak
2024-09-05 7:06 ` Pawel Laszczak
2024-09-12 15:53 ` Andy Shevchenko
2024-09-13 8:19 ` Pawel Laszczak
2024-09-13 9:01 ` Mathias Nyman
2024-09-13 9:58 ` Andy Shevchenko
2024-09-05 7:03 ` [PATCH v3] " Pawel Laszczak
2024-09-05 7:52 ` Peter Chen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240905075235.GB325295@nchen-desktop \
--to=peter.chen@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=pawell@cadence.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox