Re: [PATCH] Fix problem with xhci resume from suspend

Greg KH
2024-09-19T09:02:42Z

On Wed, Sep 18, 2024 at 10:44:27PM +0200, Jose Alberto Reguero wrote:
> ---
> drivers/usb/host/xhci-pci.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index dc1e345ab67e..8f075ab63f65 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -76,6 +76,7 @@
> #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
> #define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242
> #define PCI_DEVICE_ID_ASMEDIA_2142_XHCI 0x2142
> +#define PCI_DEVICE_ID_ASMEDIA_3042_XHCI 0x3042
> #define PCI_DEVICE_ID_ASMEDIA_3242_XHCI 0x3242
>
> static const char hcd_name[] = "xhci_hcd";
> @@ -447,6 +448,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
> pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
> xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL;
>
> + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
> + pdev->device == PCI_DEVICE_ID_ASMEDIA_3042_XHCI)
> + xhci->quirks |= XHCI_RESET_ON_RESUME;
> +
> if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
> xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
>
> --
> 2.42.0
>
>

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him
a patch that has triggered this response. He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created. Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- Your patch does not have a Signed-off-by: line. Please read the
kernel file, Documentation/process/submitting-patches.rst and resend
it after adding that line. Note, the line needs to be in the body of
the email, before the patch, not at the bottom of the patch or in the
email signature.

- You did not specify a description of why the patch is needed, or
possibly, any description at all, in the email body. Please read the
section entitled "The canonical patch format" in the kernel file,
Documentation/process/submitting-patches.rst for what is needed in
order to properly describe the change.

- You did not write a descriptive Subject: for the patch, allowing Greg,
and everyone else, to know what this patch is all about. Please read
the section entitled "The canonical patch format" in the kernel file,
Documentation/process/submitting-patches.rst for what a proper
Subject: line should look like.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot