From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
linux-kernel@vger.kernel.org,
platform-driver-x86@vger.kernel.org, linux-usb@vger.kernel.org
Cc: "Andy Shevchenko" <andy@kernel.org>, "Lee Jones" <lee@kernel.org>,
"Hans de Goede" <hdegoede@redhat.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Heikki Krogerus" <heikki.krogerus@linux.intel.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Zhang Ning" <zhangn1985@outlook.com>
Subject: [PATCH v1 2/4] mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device
Date: Thu, 3 Oct 2024 20:32:02 +0300 [thread overview]
Message-ID: <20241003174252.1190628-4-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20241003174252.1190628-2-andriy.shevchenko@linux.intel.com>
While design wise the idea of converting the driver to use
the hierarchy of the IRQ chips is correct, the implementation
has (inherited) flaws. This was unvelead when platform_get_irq()
had started WARN() on IRQ 0 that is supposed to be a Linux
IRQ number (also known as vIRQ).
Rework the driver to respect IRQ domain when creating each MFD
device separately, as the domain is not the same for all of them.
Fixes: 957ae5098185 ("platform/x86: Add Whiskey Cove PMIC TMU support")
Fixes: 57129044f504 ("mfd: intel_soc_pmic_bxtwc: Use chained IRQs for second level IRQ chips")
Reported-by: Zhang Ning <zhangn1985@outlook.com>
Closes: https://lore.kernel.org/r/TY2PR01MB3322FEDCDC048B7D3794F922CDBA2@TY2PR01MB3322.jpnprd01.prod.outlook.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/mfd/intel_soc_pmic_bxtwc.c | 31 ++++++++++++++------------
drivers/platform/x86/intel/bxtwc_tmu.c | 22 +++++-------------
2 files changed, 23 insertions(+), 30 deletions(-)
diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c
index d72995a9e820..628108dcf545 100644
--- a/drivers/mfd/intel_soc_pmic_bxtwc.c
+++ b/drivers/mfd/intel_soc_pmic_bxtwc.c
@@ -245,12 +245,6 @@ static struct mfd_cell bxt_wc_dev[] = {
.num_resources = ARRAY_SIZE(bcu_resources),
.resources = bcu_resources,
},
- {
- .name = "bxt_wcove_tmu",
- .num_resources = ARRAY_SIZE(tmu_resources),
- .resources = tmu_resources,
- },
-
{
.name = "bxt_wcove_gpio",
.num_resources = ARRAY_SIZE(gpio_resources),
@@ -261,6 +255,14 @@ static struct mfd_cell bxt_wc_dev[] = {
},
};
+static const struct mfd_cell bxt_wc_tmu_dev[] = {
+ {
+ .name = "bxt_wcove_tmu",
+ .num_resources = ARRAY_SIZE(tmu_resources),
+ .resources = tmu_resources,
+ },
+};
+
static struct mfd_cell bxt_wc_chgr_dev[] = {
{
.name = "bxt_wcove_usbc",
@@ -489,6 +491,15 @@ static int bxtwc_probe(struct platform_device *pdev)
if (ret)
return dev_err_probe(dev, ret, "Failed to add IRQ chip\n");
+ ret = bxtwc_add_chained_devices(pmic, bxt_wc_tmu_dev, ARRAY_SIZE(bxt_wc_tmu_dev),
+ pmic->irq_chip_data,
+ BXTWC_TMU_LVL1_IRQ,
+ IRQF_ONESHOT,
+ &bxtwc_regmap_irq_chip_tmu,
+ &pmic->irq_chip_data_tmu);
+ if (ret)
+ return ret;
+
ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
BXTWC_PWRBTN_LVL1_IRQ,
IRQF_ONESHOT,
@@ -497,14 +508,6 @@ static int bxtwc_probe(struct platform_device *pdev)
if (ret)
return dev_err_probe(dev, ret, "Failed to add PWRBTN IRQ chip\n");
- ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
- BXTWC_TMU_LVL1_IRQ,
- IRQF_ONESHOT,
- &bxtwc_regmap_irq_chip_tmu,
- &pmic->irq_chip_data_tmu);
- if (ret)
- return dev_err_probe(dev, ret, "Failed to add TMU IRQ chip\n");
-
/* Add chained IRQ handler for BCU IRQs */
ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
BXTWC_BCU_LVL1_IRQ,
diff --git a/drivers/platform/x86/intel/bxtwc_tmu.c b/drivers/platform/x86/intel/bxtwc_tmu.c
index d0e2a3c293b0..9ac801b929b9 100644
--- a/drivers/platform/x86/intel/bxtwc_tmu.c
+++ b/drivers/platform/x86/intel/bxtwc_tmu.c
@@ -48,9 +48,8 @@ static irqreturn_t bxt_wcove_tmu_irq_handler(int irq, void *data)
static int bxt_wcove_tmu_probe(struct platform_device *pdev)
{
struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
- struct regmap_irq_chip_data *regmap_irq_chip;
struct wcove_tmu *wctmu;
- int ret, virq, irq;
+ int ret;
wctmu = devm_kzalloc(&pdev->dev, sizeof(*wctmu), GFP_KERNEL);
if (!wctmu)
@@ -59,27 +58,18 @@ static int bxt_wcove_tmu_probe(struct platform_device *pdev)
wctmu->dev = &pdev->dev;
wctmu->regmap = pmic->regmap;
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return irq;
+ wctmu->irq = platform_get_irq(pdev, 0);
+ if (wctmu->irq < 0)
+ return wctmu->irq;
- regmap_irq_chip = pmic->irq_chip_data_tmu;
- virq = regmap_irq_get_virq(regmap_irq_chip, irq);
- if (virq < 0) {
- dev_err(&pdev->dev,
- "failed to get virtual interrupt=%d\n", irq);
- return virq;
- }
-
- ret = devm_request_threaded_irq(&pdev->dev, virq,
+ ret = devm_request_threaded_irq(&pdev->dev, wctmu->irq,
NULL, bxt_wcove_tmu_irq_handler,
IRQF_ONESHOT, "bxt_wcove_tmu", wctmu);
if (ret) {
dev_err(&pdev->dev, "request irq failed: %d,virq: %d\n",
- ret, virq);
+ ret, wctmu->irq);
return ret;
}
- wctmu->irq = virq;
/* Unmask TMU second level Wake & System alarm */
regmap_update_bits(wctmu->regmap, BXTWC_MTMUIRQ_REG,
--
2.43.0.rc1.1336.g36b5255a03ac
next prev parent reply other threads:[~2024-10-03 17:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-03 17:32 [PATCH v1 0/4] mfd: intel_soc_pmic_bxtwc: Fix IRQ domain usage Andy Shevchenko
2024-10-03 17:32 ` [PATCH v1 1/4] mfd: intel_soc_pmic_bxtwc: Use IRQ domain for USB Type-C device Andy Shevchenko
2024-10-03 17:32 ` Andy Shevchenko [this message]
2024-10-03 18:02 ` [PATCH v1 2/4] mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device Hans de Goede
2024-10-05 15:00 ` 回复: " 张 宁
2024-10-03 17:32 ` [PATCH v1 3/4] mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices Andy Shevchenko
2024-10-03 17:32 ` [PATCH v1 4/4] mfd: intel_soc_pmic_bxtwc: Fix IRQ domain names duplication Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241003174252.1190628-4-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=andy@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=zhangn1985@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox