[PATCH v2 2/3] xhci: pci: Use standard pattern for device IDs

Andy Shevchenko
2024-10-03T12:17:42Z

The definitions of vendor IDs follow the pattern PCI_VENDOR_ID_#vendor,
while device IDs — PCI_DEVICE_ID_#vendor_#device.

Update the ETRON device IDs to follow the above mentioned pattern.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/usb/host/xhci-pci.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 2c148b143c54..1f7333a5e9a9 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -34,9 +34,9 @@
#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 0x1100
#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400

-#define PCI_VENDOR_ID_ETRON 0x1b6f
-#define PCI_DEVICE_ID_EJ168 0x7023
-#define PCI_DEVICE_ID_EJ188 0x7052
+#define PCI_VENDOR_ID_ETRON 0x1b6f
+#define PCI_DEVICE_ID_ETRON_EJ168 0x7023
+#define PCI_DEVICE_ID_ETRON_EJ188 0x7052

#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
@@ -393,12 +393,12 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;

if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
- pdev->device == PCI_DEVICE_ID_EJ168) {
+ pdev->device == PCI_DEVICE_ID_ETRON_EJ168) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci->quirks |= XHCI_BROKEN_STREAMS;
}
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
- pdev->device == PCI_DEVICE_ID_EJ188) {
+ pdev->device == PCI_DEVICE_ID_ETRON_EJ188) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci->quirks |= XHCI_BROKEN_STREAMS;
}
--
2.43.0.rc1.1336.g36b5255a03ac