[PATCH v2] usb: xhci: Fix NULL pointer dereference on certain command aborts

[Michal Pecio <michal.pecio@gmail.com>]

If a command is queued to the final usable TRB of a ring segment, the
enqueue pointer is advanced to the subsequent link TRB and no further.
If the command is later aborted, when the abort completion is handled
the dequeue pointer is advanced to the first TRB of the next segment.

If no further commands are queued, xhci_handle_stopped_cmd_ring() sees
the ring pointers unequal and assumes that there is a pending command,
so it calls xhci_mod_cmd_timer() which crashes if cur_cmd was NULL.

Don't attempt timer setup if cur_cmd is NULL. The subsequent doorbell
ring likely is unnecessary too, but it's harmless. Leave it alone.

This is probably Bug 219532, but no confirmation has been received.

The issue has been independently reproduced and confirmed fixed using
a USB MCU programmed to NAK the Status stage of SET_ADDRESS forever.
Everything continued working normally after several prevented crashes.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219532
Fixes: c311e391a7ef ("xhci: rework command timeout and cancellation,")
CC: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
---

This is practically a RESEND of a patch submitted earlier this month,
but with updated commit message.

 drivers/usb/host/xhci-ring.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 09b05a62375e..dfe1a676d487 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -422,7 +422,8 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
 	if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
 	    !(xhci->xhc_state & XHCI_STATE_DYING)) {
 		xhci->current_cmd = cur_cmd;
-		xhci_mod_cmd_timer(xhci);
+		if (cur_cmd)
+			xhci_mod_cmd_timer(xhci);
 		xhci_ring_cmd_db(xhci);
 	}
 }
-- 
2.47.1