[PATCH v1] usb: core: replace usb_sndaddr0pipe macro with usb_sndctrlpipe

[Stefan Eichenberger <eichest@gmail.com>]

From: Stefan Eichenberger <stefan.eichenberger@toradex.com>

The usb_sndaddr0pipe macro is only used in the hub_set_address function.
Replace it with usb_sndctrlpipe which provides the same functionality
but would also consider the endpoint device number.

If the device has not been initialised, it is safe to use
usb_sndctrlpipe in this context because udev->devnum is set to 0.
Therefore, this change does not affect behaviour, but reduces code
complexity by reusing the existing macro.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
---
Even though this patch does not fix a bug it is related to the following
discussion and addresses the change proposed by Alan:
https://lore.kernel.org/all/aa0c06f6-f997-4bcf-a5a3-6b17f6355fca@rowland.harvard.edu/
---
 drivers/usb/core/hub.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 59e38780f76d0..66dfdf0bab90b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4697,8 +4697,6 @@ void usb_ep0_reinit(struct usb_device *udev)
 }
 EXPORT_SYMBOL_GPL(usb_ep0_reinit);
 
-#define usb_sndaddr0pipe()	(PIPE_CONTROL << 30)
-
 static int hub_set_address(struct usb_device *udev, int devnum)
 {
 	int retval;
@@ -4722,7 +4720,7 @@ static int hub_set_address(struct usb_device *udev, int devnum)
 	if (hcd->driver->address_device)
 		retval = hcd->driver->address_device(hcd, udev, timeout_ms);
 	else
-		retval = usb_control_msg(udev, usb_sndaddr0pipe(),
+		retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				USB_REQ_SET_ADDRESS, 0, devnum, 0,
 				NULL, 0, timeout_ms);
 	if (retval == 0) {
-- 
2.45.2