From: Xu Yang <xu.yang_2@nxp.com>
To: gregkh@linuxfoundation.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, peter.chen@kernel.org
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, jun.li@nxp.com
Subject: [PATCH 1/6] dt-bindings: usb: chipidea: add compatible for i.MX95 platform
Date: Wed, 19 Feb 2025 17:30:59 +0800 [thread overview]
Message-ID: <20250219093104.2589449-2-xu.yang_2@nxp.com> (raw)
In-Reply-To: <20250219093104.2589449-1-xu.yang_2@nxp.com>
The i.MX95 USB2.0 controller is basically compatible with i.MX7d, except
it needs a second interrupt for wakeup handling. This will add compatible
for i.MX95 platform and restriciton on interrupt property. Besides, this
will also add iommus property.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
.../bindings/usb/chipidea,usb2-common.yaml | 3 +++
.../bindings/usb/chipidea,usb2-imx.yaml | 26 ++++++++++++++++++-
2 files changed, 28 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2-common.yaml b/Documentation/devicetree/bindings/usb/chipidea,usb2-common.yaml
index d2a7d2ecf48a..10020af15afc 100644
--- a/Documentation/devicetree/bindings/usb/chipidea,usb2-common.yaml
+++ b/Documentation/devicetree/bindings/usb/chipidea,usb2-common.yaml
@@ -42,6 +42,9 @@ properties:
phy_type: true
+ iommus:
+ maxItems: 1
+
itc-setting:
description:
interrupt threshold control register control, the setting should be
diff --git a/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
index 8f6136f5d72e..3678804a3743 100644
--- a/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
+++ b/Documentation/devicetree/bindings/usb/chipidea,usb2-imx.yaml
@@ -41,6 +41,7 @@ properties:
- fsl,imx8mm-usb
- fsl,imx8mn-usb
- fsl,imx93-usb
+ - fsl,imx95-usb
- const: fsl,imx7d-usb
- const: fsl,imx27-usb
- items:
@@ -54,7 +55,13 @@ properties:
maxItems: 1
interrupts:
- maxItems: 1
+ minItems: 1
+ items:
+ - description: USB controller interrupt
+ - description: Wakeup interrupt
+ description:
+ One interrupt for USB controller and wakeup interrupt combined
+ case or two interrupts for individual USB controller and wakeup
clocks:
minItems: 1
@@ -191,6 +198,7 @@ allOf:
contains:
enum:
- fsl,imx93-usb
+ - fsl,imx95-usb
then:
properties:
clocks:
@@ -238,6 +246,22 @@ allOf:
maxItems: 1
clock-names: false
+ # imx95 soc use two interrupts
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx95-usb
+ then:
+ properties:
+ interrupts:
+ minItems: 2
+ else:
+ properties:
+ interrupts:
+ maxItems: 1
+
unevaluatedProperties: false
examples:
--
2.34.1
next prev parent reply other threads:[~2025-02-19 9:30 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-19 9:30 [PATCH 0/6] add USB2.0 support for i.MX95-19x19 EVK board Xu Yang
2025-02-19 9:30 ` Xu Yang [this message]
2025-02-19 17:58 ` [PATCH 1/6] dt-bindings: usb: chipidea: add compatible for i.MX95 platform Frank Li
2025-02-20 10:22 ` Xu Yang
2025-02-19 9:31 ` [PATCH 2/6] dt-bindings: usb: usbmisc-imx: " Xu Yang
2025-02-19 18:01 ` Frank Li
2025-02-20 10:32 ` Xu Yang
2025-02-21 21:49 ` Rob Herring
2025-02-19 9:31 ` [PATCH 3/6] usb: chipidea: imx: add wakeup interrupt handling Xu Yang
2025-02-19 20:26 ` Frank Li
2025-02-21 3:23 ` Xu Yang
2025-02-21 15:23 ` Frank Li
2025-02-24 11:07 ` Xu Yang
2025-02-24 15:58 ` Frank Li
2025-02-25 2:12 ` Xu Yang
2025-02-19 9:31 ` [PATCH 4/6] usb: chipidea: imx: add HSIO Block Control wakup setting Xu Yang
2025-02-19 20:35 ` Frank Li
2025-02-19 9:31 ` [PATCH 5/6] arm64: dts: imx95: add USB2.0 nodes Xu Yang
2025-02-19 20:37 ` Frank Li
2025-02-19 9:31 ` [PATCH 6/6] arm64: dts: imx95-19x19-evk: enable USB2.0 node Xu Yang
2025-02-19 20:39 ` Frank Li
2025-02-20 10:38 ` Xu Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250219093104.2589449-2-xu.yang_2@nxp.com \
--to=xu.yang_2@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=imx@lists.linux.dev \
--cc=jun.li@nxp.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter.chen@kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox