From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
Niklas Neronin <niklas.neronin@linux.intel.com>,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 10/15] usb: xhci: refactor trb_in_td() to be static
Date: Thu, 6 Mar 2025 16:49:49 +0200 [thread overview]
Message-ID: <20250306144954.3507700-11-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20250306144954.3507700-1-mathias.nyman@linux.intel.com>
From: Niklas Neronin <niklas.neronin@linux.intel.com>
Relocate trb_in_td() and marks it as static, as it's exclusively utilized
in xhci-ring.c. This adjustment lays the groundwork for future rework of
the function.
The function's logic remains unchanged; only its access specifier is
altered to static and a redundant "else" is removed on line 325
(due to checkpatch.pl complaining).
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-ring.c | 122 +++++++++++++++++------------------
drivers/usb/host/xhci.h | 2 -
2 files changed, 61 insertions(+), 63 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 70b896297494..8c7258afb6bf 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -277,6 +277,67 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
}
}
+/*
+ * If the suspect DMA address is a TRB in this TD, this function returns that
+ * TRB's segment. Otherwise it returns 0.
+ */
+static struct xhci_segment *trb_in_td(struct xhci_hcd *xhci, struct xhci_td *td,
+ dma_addr_t suspect_dma, bool debug)
+{
+ dma_addr_t start_dma;
+ dma_addr_t end_seg_dma;
+ dma_addr_t end_trb_dma;
+ struct xhci_segment *cur_seg;
+
+ start_dma = xhci_trb_virt_to_dma(td->start_seg, td->start_trb);
+ cur_seg = td->start_seg;
+
+ do {
+ if (start_dma == 0)
+ return NULL;
+ /* We may get an event for a Link TRB in the middle of a TD */
+ end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
+ &cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
+ /* If the end TRB isn't in this segment, this is set to 0 */
+ end_trb_dma = xhci_trb_virt_to_dma(cur_seg, td->end_trb);
+
+ if (debug)
+ xhci_warn(xhci,
+ "Looking for event-dma %016llx trb-start %016llx trb-end %016llx seg-start %016llx seg-end %016llx\n",
+ (unsigned long long)suspect_dma,
+ (unsigned long long)start_dma,
+ (unsigned long long)end_trb_dma,
+ (unsigned long long)cur_seg->dma,
+ (unsigned long long)end_seg_dma);
+
+ if (end_trb_dma > 0) {
+ /* The end TRB is in this segment, so suspect should be here */
+ if (start_dma <= end_trb_dma) {
+ if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
+ return cur_seg;
+ } else {
+ /* Case for one segment with
+ * a TD wrapped around to the top
+ */
+ if ((suspect_dma >= start_dma &&
+ suspect_dma <= end_seg_dma) ||
+ (suspect_dma >= cur_seg->dma &&
+ suspect_dma <= end_trb_dma))
+ return cur_seg;
+ }
+ return NULL;
+ }
+ /* Might still be somewhere in this segment */
+ if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
+ return cur_seg;
+
+ cur_seg = cur_seg->next;
+ start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
+ } while (cur_seg != td->start_seg);
+
+ return NULL;
+}
+
/*
* Return number of free normal TRBs from enqueue to dequeue pointer on ring.
* Not counting an assumed link TRB at end of each TRBS_PER_SEGMENT sized segment.
@@ -2079,67 +2140,6 @@ static void handle_port_status(struct xhci_hcd *xhci, union xhci_trb *event)
spin_lock(&xhci->lock);
}
-/*
- * If the suspect DMA address is a TRB in this TD, this function returns that
- * TRB's segment. Otherwise it returns 0.
- */
-struct xhci_segment *trb_in_td(struct xhci_hcd *xhci, struct xhci_td *td, dma_addr_t suspect_dma,
- bool debug)
-{
- dma_addr_t start_dma;
- dma_addr_t end_seg_dma;
- dma_addr_t end_trb_dma;
- struct xhci_segment *cur_seg;
-
- start_dma = xhci_trb_virt_to_dma(td->start_seg, td->start_trb);
- cur_seg = td->start_seg;
-
- do {
- if (start_dma == 0)
- return NULL;
- /* We may get an event for a Link TRB in the middle of a TD */
- end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
- &cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
- /* If the end TRB isn't in this segment, this is set to 0 */
- end_trb_dma = xhci_trb_virt_to_dma(cur_seg, td->end_trb);
-
- if (debug)
- xhci_warn(xhci,
- "Looking for event-dma %016llx trb-start %016llx trb-end %016llx seg-start %016llx seg-end %016llx\n",
- (unsigned long long)suspect_dma,
- (unsigned long long)start_dma,
- (unsigned long long)end_trb_dma,
- (unsigned long long)cur_seg->dma,
- (unsigned long long)end_seg_dma);
-
- if (end_trb_dma > 0) {
- /* The end TRB is in this segment, so suspect should be here */
- if (start_dma <= end_trb_dma) {
- if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
- return cur_seg;
- } else {
- /* Case for one segment with
- * a TD wrapped around to the top
- */
- if ((suspect_dma >= start_dma &&
- suspect_dma <= end_seg_dma) ||
- (suspect_dma >= cur_seg->dma &&
- suspect_dma <= end_trb_dma))
- return cur_seg;
- }
- return NULL;
- } else {
- /* Might still be somewhere in this segment */
- if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
- return cur_seg;
- }
- cur_seg = cur_seg->next;
- start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
- } while (cur_seg != td->start_seg);
-
- return NULL;
-}
-
static void xhci_clear_hub_tt_buffer(struct xhci_hcd *xhci, struct xhci_td *td,
struct xhci_virt_ep *ep)
{
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 5b8751b86008..cd96e0a8c593 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1884,8 +1884,6 @@ int xhci_set_interrupter_moderation(struct xhci_interrupter *ir,
/* xHCI ring, segment, TRB, and TD functions */
dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
-struct xhci_segment *trb_in_td(struct xhci_hcd *xhci, struct xhci_td *td,
- dma_addr_t suspect_dma, bool debug);
int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
void xhci_ring_cmd_db(struct xhci_hcd *xhci);
int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd,
--
2.43.0
next prev parent reply other threads:[~2025-03-06 14:49 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-06 14:49 [PATCH 00/15] xhci features for usb-next Mathias Nyman
2025-03-06 14:49 ` [PATCH 01/15] xhci: show correct U1 and U2 timeout values in debug messages Mathias Nyman
2025-03-06 14:49 ` [PATCH 02/15] usb: xhci: remove redundant update_ring_for_set_deq_completion() function Mathias Nyman
2025-03-06 14:49 ` [PATCH 03/15] usb: xhci: Don't skip on Stopped - Length Invalid Mathias Nyman
2025-03-06 14:52 ` Greg KH
2025-03-06 15:29 ` Mathias Nyman
2025-03-06 15:42 ` Greg KH
2025-03-06 14:49 ` [PATCH 04/15] usb: xhci: Complete 'error mid TD' transfers when handling Missed Service Mathias Nyman
2025-03-06 14:49 ` [PATCH 05/15] usb: xhci: Fix isochronous Ring Underrun/Overrun event handling Mathias Nyman
2025-03-06 14:49 ` [PATCH 06/15] usb: xhci: Expedite skipping missed isoch TDs on modern HCs Mathias Nyman
2025-03-06 14:49 ` [PATCH 07/15] usb: xhci: Skip only one TD on Ring Underrun/Overrun Mathias Nyman
2025-03-06 14:49 ` [PATCH 08/15] usb: xhci: correct debug message page size calculation Mathias Nyman
2025-03-06 14:49 ` [PATCH 09/15] usb: xhci: set page size to the xHCI-supported size Mathias Nyman
2025-03-06 14:49 ` Mathias Nyman [this message]
2025-03-06 14:49 ` [PATCH 11/15] usb: xhci: move debug capabilities from trb_in_td() to handle_tx_event() Mathias Nyman
2025-03-06 14:49 ` [PATCH 12/15] xhci: Prevent early endpoint restart when handling STALL errors Mathias Nyman
2025-03-07 6:54 ` Michał Pecio
2025-03-07 14:23 ` Mathias Nyman
2025-03-07 15:44 ` Michał Pecio
2025-03-07 16:18 ` Mathias Nyman
2025-03-06 14:49 ` [PATCH 13/15] usb: xhci: Apply the link chain quirk on NEC isoc endpoints Mathias Nyman
2025-03-06 14:49 ` [PATCH 14/15] usb: xhci: Unify duplicate inc_enq() code Mathias Nyman
2025-03-06 14:49 ` [PATCH 15/15] xhci: Handle spurious events on Etron host isoc enpoints Mathias Nyman
2025-03-07 8:27 ` Michał Pecio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250306144954.3507700-11-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=niklas.neronin@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox