[PATCH 01/15] xhci: show correct U1 and U2 timeout values in debug messages

[Mathias Nyman <mathias.nyman@linux.intel.com>]

U2 value is encoded in 256 microsecond intervals, show in microseconds.
U1 value is in microseconds. debug message incorrectly showed "ms"

Unwrap debug messages while we anyway modify them.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 45653114ccd7..3f2cd546a7a2 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4755,8 +4755,8 @@ static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci,
 	 */
 	if (timeout_ns <= USB3_LPM_U1_MAX_TIMEOUT)
 		return timeout_ns;
-	dev_dbg(&udev->dev, "Hub-initiated U1 disabled "
-			"due to long timeout %llu ms\n", timeout_ns);
+	dev_dbg(&udev->dev, "Hub-initiated U1 disabled due to long timeout %lluus\n",
+		timeout_ns);
 	return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U1);
 }
 
@@ -4813,8 +4813,8 @@ static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci,
 	 */
 	if (timeout_ns <= USB3_LPM_U2_MAX_TIMEOUT)
 		return timeout_ns;
-	dev_dbg(&udev->dev, "Hub-initiated U2 disabled "
-			"due to long timeout %llu ms\n", timeout_ns);
+	dev_dbg(&udev->dev, "Hub-initiated U2 disabled due to long timeout %lluus\n",
+		timeout_ns * 256);
 	return xhci_get_timeout_no_hub_lpm(udev, USB3_LPM_U2);
 }
 
-- 
2.43.0