Linux USB
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	John Youn <John.Youn@synopsys.com>
Subject: Re: [PATCH] usb: dwc2: gadget: Fix enter to hibernation for UTMI+ PHY
Date: Tue, 22 Apr 2025 09:12:09 +0200	[thread overview]
Message-ID: <2025042259-aide-unlimited-a1e2@gregkh> (raw)
In-Reply-To: <ebb0ddd4b18be292e98a25ccbdf74802ba8d77c5.1744021784.git.Minas.Harutyunyan@synopsys.com>

On Tue, Apr 22, 2025 at 06:59:54AM +0000, Minas Harutyunyan wrote:
> For UTMI+ PHY, according to programming guide, first should be set
> PMUACTV bit then STOPPCLK bit. Otherwise, when the device issues
> Remote Wakeup, then host notices disconnect instead.
> For ULPI PHY, above mentioned bits must be set in reversed order:
> STOPPCLK then PMUACTV.
> 
> Fixes: 4483ef3c1685 ("usb: dwc2: Add hibernation updates for ULPI PHY")
> Reported-by: Tomasz Mon <tomasz.mon@nordicsemi.no>
> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
> ---
>  drivers/usb/dwc2/gadget.c | 37 +++++++++++++++++++++++++------------
>  1 file changed, 25 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
> index e7bf9cc635be..be6b792e9a7d 100644
> --- a/drivers/usb/dwc2/gadget.c
> +++ b/drivers/usb/dwc2/gadget.c
> @@ -5345,20 +5345,33 @@ int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg)
>  	if (gusbcfg & GUSBCFG_ULPI_UTMI_SEL) {
>  		/* ULPI interface */
>  		gpwrdn |= GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY;
> -	}
> -	dwc2_writel(hsotg, gpwrdn, GPWRDN);
> -	udelay(10);
> +		dwc2_writel(hsotg, gpwrdn, GPWRDN);
> +		udelay(10);
>  
> -	/* Suspend the Phy Clock */
> -	pcgcctl = dwc2_readl(hsotg, PCGCTL);
> -	pcgcctl |= PCGCTL_STOPPCLK;
> -	dwc2_writel(hsotg, pcgcctl, PCGCTL);
> -	udelay(10);
> +		pcgcctl = dwc2_readl(hsotg, PCGCTL);
> +		pcgcctl |= PCGCTL_STOPPCLK;
> +		dwc2_writel(hsotg, pcgcctl, PCGCTL);
> +		udelay(10);
>  
> -	gpwrdn = dwc2_readl(hsotg, GPWRDN);
> -	gpwrdn |= GPWRDN_PMUACTV;
> -	dwc2_writel(hsotg, gpwrdn, GPWRDN);
> -	udelay(10);
> +		gpwrdn = dwc2_readl(hsotg, GPWRDN);
> +		gpwrdn |= GPWRDN_PMUACTV;
> +		dwc2_writel(hsotg, gpwrdn, GPWRDN);
> +		udelay(10);
> +	} else {
> +		/* UTMI+ Interface */
> +		dwc2_writel(hsotg, gpwrdn, GPWRDN);
> +		udelay(10);
> +
> +		gpwrdn = dwc2_readl(hsotg, GPWRDN);
> +		gpwrdn |= GPWRDN_PMUACTV;
> +		dwc2_writel(hsotg, gpwrdn, GPWRDN);
> +		udelay(10);
> +
> +		pcgcctl = dwc2_readl(hsotg, PCGCTL);
> +		pcgcctl |= PCGCTL_STOPPCLK;
> +		dwc2_writel(hsotg, pcgcctl, PCGCTL);
> +		udelay(10);
> +	}
>  
>  	/* Set flag to indicate that we are in hibernation */
>  	hsotg->hibernated = 1;
> 
> base-commit: 12393996c1b28cd944465d2f55500ca84399a7f1
> -- 
> 2.41.0
> 
> 

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- You have marked a patch with a "Fixes:" tag for a commit that is in an
  older released kernel, yet you do not have a cc: stable line in the
  signed-off-by area at all, which means that the patch will not be
  applied to any older kernel releases.  To properly fix this, please
  follow the documented rules in the
  Documentation/process/stable-kernel-rules.rst file for how to resolve
  this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot

      reply	other threads:[~2025-04-22  7:12 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-22  6:59 [PATCH] usb: dwc2: gadget: Fix enter to hibernation for UTMI+ PHY Minas Harutyunyan
2025-04-22  7:12 ` Greg Kroah-Hartman [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2025042259-aide-unlimited-a1e2@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=John.Youn@synopsys.com \
    --cc=Minas.Harutyunyan@synopsys.com \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox