From: Mike Looijmans <mike.looijmans@topic.nl>
To: linux-usb@vger.kernel.org
Cc: Mike Looijmans <mike.looijmans@topic.nl>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Matthias Kaehlcke <mka@chromium.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
Date: Wed, 7 May 2025 15:11:42 +0200 [thread overview]
Message-ID: <20250507131143.2243079-1-mike.looijmans@topic.nl> (raw)
In-Reply-To: 1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.88a2c5b0-4a7a-480c-94d2-acc50e27e923@emailsignatures365.codetwo.com
The TUSB8044 is similar to the TUSB8041. This adds the PID/VID values
and allows to specify the reset GPIO signal on the board.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
---
drivers/usb/misc/onboard_usb_dev.c | 2 ++
drivers/usb/misc/onboard_usb_dev.h | 2 ++
2 files changed, 4 insertions(+)
diff --git a/drivers/usb/misc/onboard_usb_dev.c b/drivers/usb/misc/onboard_usb_dev.c
index 9660b7fe8ee3..c4252186621b 100644
--- a/drivers/usb/misc/onboard_usb_dev.c
+++ b/drivers/usb/misc/onboard_usb_dev.c
@@ -556,6 +556,8 @@ static const struct usb_device_id onboard_dev_id_table[] = {
{ USB_DEVICE(VENDOR_ID_TI, 0x8027) }, /* TI USB8020B 2.0 HUB */
{ USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 HUB */
{ USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 HUB */
+ { USB_DEVICE(VENDOR_ID_TI, 0x8440) }, /* TI USB8044 3.0 HUB */
+ { USB_DEVICE(VENDOR_ID_TI, 0x8442) }, /* TI USB8044 2.0 HUB */
{ USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817 3.1 HUB */
{ USB_DEVICE(VENDOR_ID_VIA, 0x2817) }, /* VIA VL817 2.0 HUB */
{}
diff --git a/drivers/usb/misc/onboard_usb_dev.h b/drivers/usb/misc/onboard_usb_dev.h
index 367c5c418ae6..b0bc53f781e6 100644
--- a/drivers/usb/misc/onboard_usb_dev.h
+++ b/drivers/usb/misc/onboard_usb_dev.h
@@ -86,6 +86,8 @@ static const struct of_device_id onboard_dev_match[] = {
{ .compatible = "usb451,8027", .data = &ti_tusb8020b_data, },
{ .compatible = "usb451,8140", .data = &ti_tusb8041_data, },
{ .compatible = "usb451,8142", .data = &ti_tusb8041_data, },
+ { .compatible = "usb451,8440", .data = &ti_tusb8041_data, },
+ { .compatible = "usb451,8442", .data = &ti_tusb8041_data, },
{ .compatible = "usb4b4,6504", .data = &cypress_hx3_data, },
{ .compatible = "usb4b4,6506", .data = &cypress_hx3_data, },
{ .compatible = "usb4b4,6570", .data = &cypress_hx2vl_data, },
--
2.34.1
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: mike.looijmans@topic.nl
W: www.topic.nl
Please consider the environment before printing this e-mail
next parent reply other threads:[~2025-05-07 13:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.88a2c5b0-4a7a-480c-94d2-acc50e27e923@emailsignatures365.codetwo.com>
2025-05-07 13:11 ` Mike Looijmans [this message]
2025-05-07 13:11 ` [PATCH 2/2] dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller Mike Looijmans
2025-05-08 14:58 ` Conor Dooley
2025-05-08 15:19 ` Mike Looijmans
2025-05-08 15:53 ` Conor Dooley
2025-05-09 5:56 ` Mike Looijmans
2025-05-09 15:48 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250507131143.2243079-1-mike.looijmans@topic.nl \
--to=mike.looijmans@topic.nl \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mka@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox