From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
Niklas Neronin <niklas.neronin@linux.intel.com>,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 08/24] usb: xhci: move doorbell array pointer assignment
Date: Thu, 15 May 2025 16:56:05 +0300 [thread overview]
Message-ID: <20250515135621.335595-9-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20250515135621.335595-1-mathias.nyman@linux.intel.com>
From: Niklas Neronin <niklas.neronin@linux.intel.com>
Move the assignment of the doorbell array pointer from xhci_mem_init()
to xhci_init(). The assignment now utilizes the newly introduced
xhci_set_doorbell_ptr() function.
Doorbell Array Offset mask (DBOFF_MASK) is updated to directly specify its
bit range as 31:2, rather than using inverted reserved bits 1:0.
This change simplifies the mask representation, making it more intuitive
and easier to understand.
Remove the "// " prefix from trace messages, as it is unnecessary and
distracting.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-caps.h | 4 ++--
drivers/usb/host/xhci-mem.c | 8 --------
drivers/usb/host/xhci.c | 13 +++++++++++++
3 files changed, 15 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/host/xhci-caps.h b/drivers/usb/host/xhci-caps.h
index f6b9a00a0ab9..4b8ff4815644 100644
--- a/drivers/usb/host/xhci-caps.h
+++ b/drivers/usb/host/xhci-caps.h
@@ -62,8 +62,8 @@
#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
-/* db_off bitmask - bits 0:1 reserved */
-#define DBOFF_MASK (~0x3)
+/* db_off bitmask - bits 31:2 Doorbell Array Offset */
+#define DBOFF_MASK (0xfffffffc)
/* run_regs_off bitmask - bits 0:4 reserved */
#define RTSOFF_MASK (~0x1f)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index ac96f0155cab..2f4dbb67b1bf 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2419,7 +2419,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
struct xhci_interrupter *ir;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
dma_addr_t dma;
- unsigned int val;
u32 temp;
/*
@@ -2496,13 +2495,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
*/
xhci->cmd_ring_reserved_trbs++;
- val = readl(&xhci->cap_regs->db_off);
- val &= DBOFF_MASK;
- xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "// Doorbell array is located at offset 0x%x from cap regs base addr",
- val);
- xhci->dba = (void __iomem *) xhci->cap_regs + val;
-
/* Allocate and set up primary interrupter 0 with an event ring. */
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Allocating primary event ring");
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index e8c262865188..0639d8b7372b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -514,6 +514,16 @@ static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
xhci_write_64(xhci, crcr, &xhci->op_regs->cmd_ring);
}
+static void xhci_set_doorbell_ptr(struct xhci_hcd *xhci)
+{
+ u32 offset;
+
+ offset = readl(&xhci->cap_regs->db_off) & DBOFF_MASK;
+ xhci->dba = (void __iomem *)xhci->cap_regs + offset;
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "Doorbell array is located at offset 0x%x from cap regs base addr", offset);
+}
+
/*
* Initialize memory for HCD and xHC (one-time init).
*
@@ -548,6 +558,9 @@ static int xhci_init(struct usb_hcd *hcd)
/* Set Device Context Base Address Array pointer */
xhci_write_64(xhci, xhci->dcbaa->dma, &xhci->op_regs->dcbaa_ptr);
+ /* Set Doorbell array pointer */
+ xhci_set_doorbell_ptr(xhci);
+
/* Initializing Compliance Mode Recovery Data If Needed */
if (xhci_compliance_mode_recovery_timer_quirk_check()) {
xhci->quirks |= XHCI_COMP_MODE_QUIRK;
--
2.43.0
next prev parent reply other threads:[~2025-05-15 13:56 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-15 13:55 [PATCH 00/24] xhci features for usb-next Mathias Nyman
2025-05-15 13:55 ` [PATCH 01/24] usb: xhci: Don't log transfer ring segment list on errors Mathias Nyman
2025-05-15 13:55 ` [PATCH 02/24] usb: xhci: Add debugfs support for xHCI port bandwidth Mathias Nyman
2025-05-15 13:56 ` [PATCH 03/24] usb: xhci: relocate pre-allocation initialization Mathias Nyman
2025-05-15 13:56 ` [PATCH 04/24] usb: xhci: move device slot enabling register write Mathias Nyman
2025-05-15 13:56 ` [PATCH 05/24] usb: xhci: move command ring pointer write Mathias Nyman
2025-05-15 13:56 ` [PATCH 06/24] usb: xhci: refactor xhci_set_cmd_ring_deq() Mathias Nyman
2025-05-15 13:56 ` [PATCH 07/24] usb: xhci: move DCBAA pointer write Mathias Nyman
2025-05-15 13:56 ` Mathias Nyman [this message]
2025-05-15 13:56 ` [PATCH 09/24] usb: xhci: move enabling of USB 3 device notifications Mathias Nyman
2025-05-15 13:56 ` [PATCH 10/24] usb: xhci: remove error handling from xhci_add_interrupter() Mathias Nyman
2025-05-15 13:56 ` [PATCH 11/24] usb: xhci: move initialization of the primary interrupter Mathias Nyman
2025-05-15 13:56 ` [PATCH 12/24] usb: xhci: add individual allocation checks in xhci_mem_init() Mathias Nyman
2025-05-15 13:56 ` [PATCH 13/24] usb: xhci: cleanup xhci_mem_init() Mathias Nyman
2025-05-15 13:56 ` [PATCH 14/24] usb: xhci: set requested IMODI to the closest supported value Mathias Nyman
2025-05-15 13:56 ` [PATCH 15/24] usb: xhci: improve Interrupt Management register macros Mathias Nyman
2025-05-15 13:56 ` [PATCH 16/24] usb: xhci: guarantee that IMAN register is flushed Mathias Nyman
2025-05-15 13:56 ` [PATCH 17/24] usb: xhci: remove '0' write to write-1-to-clear register Mathias Nyman
2025-05-15 13:56 ` [PATCH 18/24] usb: xhci: rework Event Ring Segment Table Size mask Mathias Nyman
2025-05-15 13:56 ` [PATCH 19/24] usb: xhci: rework Event Ring Segment Table Address mask Mathias Nyman
2025-05-15 13:56 ` [PATCH 20/24] usb: xhci: cleanup IMOD register comments Mathias Nyman
2025-05-15 13:56 ` [PATCH 21/24] usb: xhci: rename 'irq_pending' to 'iman' Mathias Nyman
2025-05-15 13:56 ` [PATCH 22/24] usb: xhci: rename 'irq_control' to 'imod' Mathias Nyman
2025-05-15 13:56 ` [PATCH 23/24] usb: xhci: add warning message specifying which Set TR Deq failed Mathias Nyman
2025-05-16 12:43 ` Michał Pecio
2025-05-16 14:32 ` Neronin, Niklas
2025-05-19 14:33 ` Mathias Nyman
2025-05-21 10:34 ` Greg KH
2025-05-21 13:22 ` Mathias Nyman
2025-05-15 13:56 ` [PATCH 24/24] xhci: Add host support for eUSB2 double isochronous bandwidth devices Mathias Nyman
2025-05-16 0:27 ` Thinh Nguyen
2025-05-16 0:40 ` Thinh Nguyen
2025-05-16 11:58 ` Mathias Nyman
2025-05-17 0:16 ` Thinh Nguyen
2025-05-21 10:36 ` [PATCH 00/24] xhci features for usb-next Greg KH
2025-05-21 13:24 ` Mathias Nyman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250515135621.335595-9-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=niklas.neronin@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox