Re: [PATCH v1 2/2] usb: dwc3: Force full reset on xhci removal

[Greg KH <gregkh@linuxfoundation.org>]

On Thu, May 15, 2025 at 04:02:59AM +0000, Roy Luo wrote:
> During an xhci host controller reset (via `USBCMD.HCRST`), reading DWC3
> registers can return zero instead of their actual values. This applies
> not only to registers within the xhci memory space but also those in
> the broader DWC3 IP block.
> 
> By default, the xhci driver doesn't wait for the reset handshake to
> complete during teardown. This can cause problems when the DWC3 controller
> is operating as a dual role device and is switching from host to device
> mode, the invalid register read caused by ongoing HCRST could lead to
> gadget mode startup failures and unintended register overwrites.
> 
> To mitigate this, enable xhci-full-reset-on-remove-quirk to ensure that
> xhci_reset() completes its full reset handshake during xhci removal.
> 
> Signed-off-by: Roy Luo <royluo@google.com>
> ---
>  drivers/usb/dwc3/host.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)

What commit id does this fix?  Should it also go to stable kernels?  If
so, how far back?

thanks,

greg k-h