[PATCH v3] usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command

[Jay Chen <shawn2000100@gmail.com>]

According to the xHCI 1.2 spec (Section 6.2.3, p.454), the Average
TRB Length (avg_trb_len) for control endpoints should be set to 8.

Currently, during the Address Device Command, EP0's avg_trb_len remains 0,
which may cause some xHCI hardware to reject the Input Context, resulting
in device enumeration failures. In extreme cases, using a zero avg_trb_len
in calculations may lead to division-by-zero errors and unexpected system
crashes.

This patch sets avg_trb_len to 8 for EP0 in
xhci_setup_addressable_virt_dev(), ensuring compliance with the spec
and improving compatibility across various host controller implementations.

v3:
- Corrected author name in commit metadata and added changelog.

v2:
- Fixed malformed patch formatting issue pointed out by maintainer.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=220033
Signed-off-by: Jay Chen <shawn2000100@gmail.com>
---
 drivers/usb/host/xhci-mem.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index d698095fc88d..fed9e9d1990c 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1166,6 +1166,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	ep0_ctx->deq = cpu_to_le64(dev->eps[0].ring->first_seg->dma |
 				   dev->eps[0].ring->cycle_state);
 
+	ep0_ctx->tx_info |= cpu_to_le32(EP_AVG_TRB_LENGTH(8));
+
 	trace_xhci_setup_addressable_virt_device(dev);
 
 	/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
-- 
2.43.5