[PATCH v1 1/2] usb: gadget: pxa25x_udc: Switch to use devm_gpio_request_one()

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

devm_gpio_request() is going to be removed. This driver is only user of that
API. Convert it to use different API.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/usb/gadget/udc/pxa25x_udc.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
index 24eb1ae78e45..366abdab095c 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.c
+++ b/drivers/usb/gadget/udc/pxa25x_udc.c
@@ -2348,15 +2348,14 @@ static int pxa25x_udc_probe(struct platform_device *pdev)
 	dev->transceiver = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
 
 	if (gpio_is_valid(dev->mach->gpio_pullup)) {
-		retval = devm_gpio_request(&pdev->dev, dev->mach->gpio_pullup,
-					   "pca25x_udc GPIO PULLUP");
+		retval = devm_gpio_request_one(&pdev->dev, dev->mach->gpio_pullup,
+					       GPIOF_OUT_INIT_LOW, "pca25x_udc GPIO PULLUP");
 		if (retval) {
 			dev_dbg(&pdev->dev,
 				"can't get pullup gpio %d, err: %d\n",
 				dev->mach->gpio_pullup, retval);
 			goto err;
 		}
-		gpio_direction_output(dev->mach->gpio_pullup, 0);
 	}
 
 	timer_setup(&dev->timer, udc_watchdog, 0);
-- 
2.47.2