From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>, Raju Rangoju <Raju.Rangoju@amd.com>,
stable@vger.kernel.org,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 1/4] usb: xhci: quirk for data loss in ISOC transfers
Date: Fri, 27 Jun 2025 17:41:19 +0300 [thread overview]
Message-ID: <20250627144127.3889714-2-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20250627144127.3889714-1-mathias.nyman@linux.intel.com>
From: Raju Rangoju <Raju.Rangoju@amd.com>
During the High-Speed Isochronous Audio transfers, xHCI
controller on certain AMD platforms experiences momentary data
loss. This results in Missed Service Errors (MSE) being
generated by the xHCI.
The root cause of the MSE is attributed to the ISOC OUT endpoint
being omitted from scheduling. This can happen when an IN
endpoint with a 64ms service interval either is pre-scheduled
prior to the ISOC OUT endpoint or the interval of the ISOC OUT
endpoint is shorter than that of the IN endpoint. Consequently,
the OUT service is neglected when an IN endpoint with a service
interval exceeding 32ms is scheduled concurrently (every 64ms in
this scenario).
This issue is particularly seen on certain older AMD platforms.
To mitigate this problem, it is recommended to adjust the service
interval of the IN endpoint to not exceed 32ms (interval 8). This
adjustment ensures that the OUT endpoint will not be bypassed,
even if a smaller interval value is utilized.
Cc: stable@vger.kernel.org
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-mem.c | 4 ++++
drivers/usb/host/xhci-pci.c | 25 +++++++++++++++++++++++++
drivers/usb/host/xhci.h | 1 +
3 files changed, 30 insertions(+)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index bd745a0f2f78..6680afa4f596 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1449,6 +1449,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
/* Periodic endpoint bInterval limit quirk */
if (usb_endpoint_xfer_int(&ep->desc) ||
usb_endpoint_xfer_isoc(&ep->desc)) {
+ if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_9) &&
+ interval >= 9) {
+ interval = 8;
+ }
if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_7) &&
udev->speed >= USB_SPEED_HIGH &&
interval >= 7) {
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 0c481cbc8f08..00fac8b233d2 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -71,12 +71,22 @@
#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec
#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0
+#define PCI_DEVICE_ID_AMD_ARIEL_TYPEC_XHCI 0x13ed
+#define PCI_DEVICE_ID_AMD_ARIEL_TYPEA_XHCI 0x13ee
+#define PCI_DEVICE_ID_AMD_STARSHIP_XHCI 0x148c
+#define PCI_DEVICE_ID_AMD_FIREFLIGHT_15D4_XHCI 0x15d4
+#define PCI_DEVICE_ID_AMD_FIREFLIGHT_15D5_XHCI 0x15d5
+#define PCI_DEVICE_ID_AMD_RAVEN_15E0_XHCI 0x15e0
+#define PCI_DEVICE_ID_AMD_RAVEN_15E1_XHCI 0x15e1
+#define PCI_DEVICE_ID_AMD_RAVEN2_XHCI 0x15e5
#define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639
#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
#define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb
#define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc
+#define PCI_DEVICE_ID_ATI_NAVI10_7316_XHCI 0x7316
+
#define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042
#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142
#define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242
@@ -280,6 +290,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
if (pdev->vendor == PCI_VENDOR_ID_NEC)
xhci->quirks |= XHCI_NEC_HOST;
+ if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+ (pdev->device == PCI_DEVICE_ID_AMD_ARIEL_TYPEC_XHCI ||
+ pdev->device == PCI_DEVICE_ID_AMD_ARIEL_TYPEA_XHCI ||
+ pdev->device == PCI_DEVICE_ID_AMD_STARSHIP_XHCI ||
+ pdev->device == PCI_DEVICE_ID_AMD_FIREFLIGHT_15D4_XHCI ||
+ pdev->device == PCI_DEVICE_ID_AMD_FIREFLIGHT_15D5_XHCI ||
+ pdev->device == PCI_DEVICE_ID_AMD_RAVEN_15E0_XHCI ||
+ pdev->device == PCI_DEVICE_ID_AMD_RAVEN_15E1_XHCI ||
+ pdev->device == PCI_DEVICE_ID_AMD_RAVEN2_XHCI))
+ xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_9;
+
+ if (pdev->vendor == PCI_VENDOR_ID_ATI &&
+ pdev->device == PCI_DEVICE_ID_ATI_NAVI10_7316_XHCI)
+ xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_9;
+
if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
xhci->quirks |= XHCI_AMD_0x96_HOST;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index fa1ea0e0c7fb..a20f4e7cd43a 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1643,6 +1643,7 @@ struct xhci_hcd {
#define XHCI_WRITE_64_HI_LO BIT_ULL(47)
#define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48)
#define XHCI_ETRON_HOST BIT_ULL(49)
+#define XHCI_LIMIT_ENDPOINT_INTERVAL_9 BIT_ULL(50)
unsigned int num_active_eps;
unsigned int limit_active_eps;
--
2.43.0
next prev parent reply other threads:[~2025-06-27 14:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-27 14:41 [PATCH 0/4] xhci fixes for usb-linus Mathias Nyman
2025-06-27 14:41 ` Mathias Nyman [this message]
2025-06-27 14:41 ` [PATCH 2/4] xhci: Disable stream for xHC controller with XHCI_BROKEN_STREAMS Mathias Nyman
2025-06-27 14:41 ` [PATCH 3/4] xhci: dbctty: disable ECHO flag by default Mathias Nyman
2025-06-27 14:41 ` [PATCH 4/4] xhci: dbc: Flush queued requests before stopping dbc Mathias Nyman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250627144127.3889714-2-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=Raju.Rangoju@amd.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox