From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: SCHNEIDER Johannes <johannes.schneider@leica-geosystems.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
GEO-CHHER-bsp-development
<bsp-development.geo@leica-geosystems.com>
Subject: Re: [PATCH v3] usb: dwc3: gadget: Simplify TRB reclaim logic by removing redundant 'chain' argument
Date: Sat, 28 Jun 2025 17:23:39 +0200 [thread overview]
Message-ID: <2025062825-equipment-barista-dabc@gregkh> (raw)
In-Reply-To: <AM8PR06MB752168CCAF31023017025DD5BC7BA@AM8PR06MB7521.eurprd06.prod.outlook.com>
On Wed, Jun 25, 2025 at 07:53:17AM +0000, SCHNEIDER Johannes wrote:
> Now that the TRB reclaim logic always inspects the TRB's CHN (Chain) bit
> directly to determine whether a TRB is part of a chain, the explicit
> 'chain' parameter passed into dwc3_gadget_ep_reclaim_completed_trb()
> is no longer necessary.
>
> This cleanup simplifies the reclaim code by avoiding duplication of
> chain state tracking, and makes the reclaim logic rely entirely on the
> hardware descriptor flags — which are already present and accurate at
> this stage.
>
> No functional changes intended.
>
> Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
> ---
> v3: no changes, re-submission as single patch
> v2: no changes to the patch, "faulty" re-submission
> v1: initial submission as part of a series
> Link: https://lore.kernel.org/lkml/AM8PR06MB7521CFF1CD8A93622A537EEDBC78A@AM8PR06MB7521.eurprd06.prod.outlook.com/
>
> drivers/usb/dwc3/gadget.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 99fbd29d8f46..a4a2bf273f94 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -3497,7 +3497,7 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
>
> static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep,
> struct dwc3_request *req, struct dwc3_trb *trb,
> - const struct dwc3_event_depevt *event, int status, int chain)
> + const struct dwc3_event_depevt *event, int status)
> {
> unsigned int count;
>
> @@ -3549,7 +3549,8 @@ static int dwc3_gadget_ep_reclaim_completed_trb(struct dwc3_ep *dep,
> if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
> return 1;
>
> - if (event->status & DEPEVT_STATUS_SHORT && !chain)
> + if (event->status & DEPEVT_STATUS_SHORT &&
> + !(trb->ctrl & DWC3_TRB_CTRL_CHN))
> return 1;
>
> if ((trb->ctrl & DWC3_TRB_CTRL_ISP_IMI) &&
> @@ -3576,8 +3577,7 @@ static int dwc3_gadget_ep_reclaim_trb_sg(struct dwc3_ep *dep,
> trb = &dep->trb_pool[dep->trb_dequeue];
>
> ret = dwc3_gadget_ep_reclaim_completed_trb(dep, req,
> - trb, event, status,
> - !!(trb->ctrl & DWC3_TRB_CTRL_CHN));
> + trb, event, status);
> if (ret)
> break;
> }
> --
> 2.43.0
>
Applying just this patch I get:
CC [M] drivers/usb/dwc3/gadget.o
drivers/usb/dwc3/gadget.c: In function ‘dwc3_gadget_ep_reclaim_completed_trb’:
drivers/usb/dwc3/gadget.c:3517:13: error: ‘chain’ undeclared (first use in this function)
3517 | if (chain && (trb->ctrl & DWC3_TRB_CTRL_HWO))
| ^~~~~
drivers/usb/dwc3/gadget.c:3517:13: note: each undeclared identifier is reported only once for each function it appears in
So that's not going to work :(
next prev parent reply other threads:[~2025-06-28 15:23 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-21 19:07 [PATCH 0/3] usb: dwc3: Fix TRB reclaim regression and clean up reclaim logic Johannes Schneider
2025-06-21 19:07 ` [PATCH 1/3] usb: dwc3: gadget: Fix TRB reclaim logic for short transfers and ZLPs Johannes Schneider
2025-06-23 22:41 ` Thinh Nguyen
2025-06-25 7:49 ` [PATCH v3] " SCHNEIDER Johannes
2025-06-28 15:18 ` Greg Kroah-Hartman
2025-06-28 15:19 ` Greg Kroah-Hartman
2025-06-21 19:07 ` [PATCH 2/3] usb: dwc3: gadget: Simplify TRB reclaim logic by removing redundant 'chain' argument Johannes Schneider
2025-06-23 22:43 ` Thinh Nguyen
2025-06-25 7:53 ` [PATCH v3] " SCHNEIDER Johannes
2025-06-28 15:23 ` Greg Kroah-Hartman [this message]
2025-06-29 8:45 ` SCHNEIDER Johannes
2025-06-29 9:06 ` Greg Kroah-Hartman
2025-06-21 19:07 ` [PATCH 3/3] usb: dwc3: gadget: Simplify logic in dwc3_needs_extra_trb() Johannes Schneider
2025-06-23 22:31 ` Thinh Nguyen
2025-06-24 10:47 ` SCHNEIDER Johannes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2025062825-equipment-barista-dabc@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=Thinh.Nguyen@synopsys.com \
--cc=bsp-development.geo@leica-geosystems.com \
--cc=johannes.schneider@leica-geosystems.com \
--cc=kernel@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox