From: "Peter Chen (CIX)" <peter.chen@kernel.org>
To: Niklas Neronin <niklas.neronin@linux.intel.com>
Cc: mathias.nyman@linux.intel.com, linux-usb@vger.kernel.org
Subject: Re: [PATCH 0/7] usb: xhci: Port Register Set improvements
Date: Fri, 5 Sep 2025 09:57:39 +0800 [thread overview]
Message-ID: <20250905015739.GA2473920@nchen-desktop> (raw)
In-Reply-To: <20250904154221.2314596-1-niklas.neronin@linux.intel.com>
On 25-09-04 17:42:13, Niklas Neronin wrote:
> The aim of this patch set is to introduce tracing for PORTCS writes and
I find several patches you are using PORTCS instead of PORTSC, is it typo?
Peter
> implement a Port Register Set struct.
>
> Introduces a new struct for the Host Controller USB Port Register Set.
> The current implementation accesses these registers through a single
> '__le32' pointer, which, in conjunction with a macro, navigates to the
> specific register using (base address + offset).
>
> Currently, how its accessed | Register Name
> --------------------------------------------------------------------------
> port->addr | Port Status and Control
> port->addr + PORTPMSC | Port Power Management Status and Control
> port->addr + PORTLI | Port Link Info
> port->addr + PORTHLPMC | Port Hardware LPM Control
>
>
> After, how its accessed | Register Name
> --------------------------------------------------------------------------
> port->port_reg->portsc | Port Status and Control
> port->port_reg->portpmsc | Port Power Management Status and Control
> port->port_reg->portli | Port Link Info
> port->port_reg->porthlmpc | Port Hardware LPM Control
>
> These changes make it easier for future modification and their review.
>
> Note:
> I have chosen to split the struct changes across three separate commits
> due to the substantial number of modified lines. Personally, I find that
> minor typos are more likely to occur when dealing with larger patches.
> However, I am open to consolidating these patches into a single commit
> after review.
>
> Niklas Neronin (7):
> usb: xhci: correct indentation for PORTCS tracing function
> usb: xhci: align PORTCS trace with one-based port numbering
> usb: xhci: improve xhci_decode_portsc()
> usb: xhci: add tracing for PORTCS register writes
> usb: xhci: add USB Port Register Set struct
> usb: xhci: implement USB Port Register Set struct
> usb: xhci: rename Port Register Set pointer in struct 'xhci_port'
>
> drivers/usb/host/xhci-debugfs.c | 6 +-
> drivers/usb/host/xhci-hub.c | 115 ++++++++++++++++----------------
> drivers/usb/host/xhci-mem.c | 3 +-
> drivers/usb/host/xhci-pci.c | 4 +-
> drivers/usb/host/xhci-ring.c | 2 +-
> drivers/usb/host/xhci-tegra.c | 12 ++--
> drivers/usb/host/xhci-trace.h | 39 ++++++-----
> drivers/usb/host/xhci.c | 41 +++++++-----
> drivers/usb/host/xhci.h | 94 +++++++++++++-------------
> 9 files changed, 161 insertions(+), 155 deletions(-)
>
> --
> 2.50.1
>
>
--
Best regards,
Peter
next prev parent reply other threads:[~2025-09-05 1:57 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-04 15:42 [PATCH 0/7] usb: xhci: Port Register Set improvements Niklas Neronin
2025-09-04 15:42 ` [PATCH 1/7] usb: xhci: correct indentation for PORTCS tracing function Niklas Neronin
2025-09-04 15:42 ` [PATCH 2/7] usb: xhci: align PORTCS trace with one-based port numbering Niklas Neronin
2025-09-04 15:42 ` [PATCH 3/7] usb: xhci: improve xhci_decode_portsc() Niklas Neronin
2025-09-04 15:42 ` [PATCH 4/7] usb: xhci: add tracing for PORTCS register writes Niklas Neronin
2025-09-04 15:42 ` [PATCH 5/7] usb: xhci: add USB Port Register Set struct Niklas Neronin
2025-09-04 15:42 ` [PATCH 6/7] usb: xhci: implement " Niklas Neronin
2025-09-04 15:42 ` [PATCH 7/7] usb: xhci: rename Port Register Set pointer in struct 'xhci_port' Niklas Neronin
2025-09-05 2:40 ` Peter Chen (CIX)
2025-09-10 7:24 ` Neronin, Niklas
2025-09-12 0:48 ` Peter Chen (CIX)
2025-09-05 1:57 ` Peter Chen (CIX) [this message]
2025-09-10 7:12 ` [PATCH 0/7] usb: xhci: Port Register Set improvements Neronin, Niklas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250905015739.GA2473920@nchen-desktop \
--to=peter.chen@kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@linux.intel.com \
--cc=niklas.neronin@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox