Re: [PATCH 0/1] usb: xhci: Queue URB_ZERO_PACKET as one TD

[Michal Pecio <michal.pecio@gmail.com>]

On Wed, 10 Sep 2025 02:03:06 +0200, Michal Pecio wrote:
> On Wed, 10 Sep 2025 01:57:39 +0300, Mathias Nyman wrote:
> > On 9.9.2025 20.38, Michal Pecio wrote:  
> > > On Tue, 9 Sep 2025 16:04:33 +0300, Mathias Nyman wrote:    
> > >> Adding the zero-length TRB to the original TD when we need to send a
> > >> zero-length packet would simplify things, and I would otherwise fully
> > >> support this, but the xHCI spec is pretty clear that it requires a
> > >> dedicated TD for zero-length transactions.    
> > > 
> > > You are right of course, an empty TRB in a TD would simply send no
> > > data, or maybe it's a TRB Error, I'm not sure.
> > > 
> > > But this is not what this patch is about - the trick is to use an
> > > *unchained* TRB, which is a separate TD from HW's perspective, and
> > > to count it as part of the same TD from the driver's perspective.    
> > 
> > Ok, I see.
> > The whole TD without completion flag does worry me a bit.
> >
> > We need to make sure stop/stald mid TD cases work, and  urb length is
> > set correctly.  
> 
> It looks odd, but I can't find anything wrong.
> 
> 4.10.4 discusses what happens when IOC is clear on the last TRB of
> a TD so it looks like this is allowed.
> 
> If the first TD halts or stops before completion then it doesn't
> matter that we cleared its IOC. Everything works as before, except
> that Set TR Deq will skip both TDs and the URB will be given back.

Well, there is one difference, but so far I found no ill effects.

All those (ep_trb == td->end_trb) comparisons will be false in case
of an event on the last TRB of the first TD, currently they are true.

But it should be harmless:
* COMP_SUCCESS case in process_bulk_intr_td() is impossible (no IOC)
* on errors, we may use sum_trb_lengths() unnecessarily, should be OK.

These are the only such checks I see. Nothing in handle_tx_event()
and finish_td(), and from there we go to handle_halted_endpoint().


Generally, I tried running this with wMaxPacket=64, TRB length reduced
to 64B (patched xhci_hcd) to force multiple TRBs in the first TD and
with transfer lengths of 32, 64, 96, 128, 192, 256. It worked.

I can run it again tomorrow and send event-ring/trbs and epXX/trbs.