From: Ryan Chen <ryan_chen@aspeedtech.com>
To: ryan_chen <ryan_chen@aspeedtech.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
"Alan Stern" <stern@rowland.harvard.edu>,
Philipp Zabel <p.zabel@pengutronix.de>,
<linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 4/4] usb: uhci: Add Aspeed AST2700 support
Date: Wed, 17 Sep 2025 10:19:26 +0800 [thread overview]
Message-ID: <20250917021926.3692137-5-ryan_chen@aspeedtech.com> (raw)
In-Reply-To: <20250917021926.3692137-1-ryan_chen@aspeedtech.com>
Unlike earlier Aspeed SoCs (AST2400/2500/2600) which are limited to
32-bit DMA addressing, the UHCI controller in AST2700 supports 64-bit
DMA. Update the platform UHCI driver to select the appropriate DMA
mask based on the device tree compatible string.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
drivers/usb/host/uhci-platform.c | 15 +++++++++++----
1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 1c1715bddc27..84867f75dfcd 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -71,6 +71,7 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
struct usb_hcd *hcd;
struct uhci_hcd *uhci;
struct resource *res;
+ u64 *dma_mask_ptr;
int ret;
if (usb_disabled())
@@ -81,7 +82,8 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
* Since shared usb code relies on it, set it here for now.
* Once we have dma capability bindings this can go away.
*/
- ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ dma_mask_ptr = (u64 *)of_device_get_match_data(&pdev->dev);
+ ret = dma_coerce_mask_and_coherent(&pdev->dev, *dma_mask_ptr);
if (ret)
return ret;
@@ -114,7 +116,8 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
}
if (of_device_is_compatible(np, "aspeed,ast2400-uhci") ||
of_device_is_compatible(np, "aspeed,ast2500-uhci") ||
- of_device_is_compatible(np, "aspeed,ast2600-uhci")) {
+ of_device_is_compatible(np, "aspeed,ast2600-uhci") ||
+ of_device_is_compatible(np, "aspeed,ast2700-uhci")) {
uhci->is_aspeed = 1;
dev_info(&pdev->dev,
"Enabled Aspeed implementation workarounds\n");
@@ -188,9 +191,13 @@ static void uhci_hcd_platform_shutdown(struct platform_device *op)
uhci_hc_died(hcd_to_uhci(hcd));
}
+static const u64 dma_mask_32 = DMA_BIT_MASK(32);
+static const u64 dma_mask_64 = DMA_BIT_MASK(64);
+
static const struct of_device_id platform_uhci_ids[] = {
- { .compatible = "generic-uhci", },
- { .compatible = "platform-uhci", },
+ { .compatible = "generic-uhci", .data = &dma_mask_32},
+ { .compatible = "platform-uhci", .data = &dma_mask_32},
+ { .compatible = "aspeed,ast2700-uhci", .data = &dma_mask_64},
{}
};
MODULE_DEVICE_TABLE(of, platform_uhci_ids);
--
2.34.1
prev parent reply other threads:[~2025-09-17 2:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-17 2:19 [PATCH v2 0/4] Add Aspeed AST2700 uhci support Ryan Chen
2025-09-17 2:19 ` [PATCH v2 1/4] dt-bindings: usb: uhci: Add reset property Ryan Chen
2025-09-17 19:32 ` Conor Dooley
2025-09-17 2:19 ` [PATCH v2 2/4] usb: uhci: Add reset control support Ryan Chen
2025-09-17 14:02 ` Alan Stern
2025-09-18 2:27 ` Ryan Chen
2025-09-17 2:19 ` [PATCH v2 3/4] dt-bindings: usb: uhci: Add Aspeed AST2700 compatible Ryan Chen
2025-09-17 19:32 ` Conor Dooley
2025-09-17 2:19 ` Ryan Chen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250917021926.3692137-5-ryan_chen@aspeedtech.com \
--to=ryan_chen@aspeedtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox