Linux USB
 help / color / mirror / Atom feed
From: Frank Li via B4 Relay <devnull+Frank.Li.nxp.com@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
	Shawn Guo <shawnguo@kernel.org>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	 bjorn.andersson@oss.qualcomm.com, imx@lists.linux.dev,
	 Frank Li <Frank.Li@nxp.com>, Ze Huang <huang.ze@linux.dev>
Subject: [PATCH v4 3/4] usb: dwc3: dwc3-generic-plat: Add layerscape dwc3 support
Date: Fri, 26 Sep 2025 14:19:42 -0400	[thread overview]
Message-ID: <20250926-ls_dma_coherence-v4-3-21e9c6bdb5cb@nxp.com> (raw)
In-Reply-To: <20250926-ls_dma_coherence-v4-0-21e9c6bdb5cb@nxp.com>

From: Frank Li <Frank.Li@nxp.com>

Add layerscape dwc3 support by using flatten dwc3 core library. Layerscape
dwc3 need set gsbuscfg0-reqinfo as 0x2222 when dma-coherence set.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
chagne in v4
- rename gsbuscfg0 to gsbuscfg0_reqinfo
- use flatten core's properties.

change in v3 (skipped)
---
 drivers/usb/dwc3/dwc3-generic-plat.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c
index af95a527dcc27a7a14d38dcc887f74a888ed91e6..cfcefeffd7ad6c0a21ccc9aaa4483b9acb9dc4e0 100644
--- a/drivers/usb/dwc3/dwc3-generic-plat.c
+++ b/drivers/usb/dwc3/dwc3-generic-plat.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include "glue.h"
@@ -29,6 +30,7 @@ static void dwc3_generic_reset_control_assert(void *data)
 
 static int dwc3_generic_probe(struct platform_device *pdev)
 {
+	const struct dwc3_properties *properties;
 	struct dwc3_probe_data probe_data = {};
 	struct device *dev = &pdev->dev;
 	struct dwc3_generic *dwc3g;
@@ -75,7 +77,13 @@ static int dwc3_generic_probe(struct platform_device *pdev)
 	probe_data.dwc = &dwc3g->dwc;
 	probe_data.res = res;
 	probe_data.ignore_clocks_and_resets = true;
-	probe_data.properties = DWC3_DEFAULT_PROPERTIES;
+
+	properties = of_device_get_match_data(dev);
+	if (of_dma_is_coherent(pdev->dev.of_node) && properties)
+		probe_data.properties = *properties;
+	else
+		probe_data.properties = DWC3_DEFAULT_PROPERTIES;
+
 	ret = dwc3_core_probe(&probe_data);
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to register DWC3 Core\n");
@@ -146,8 +154,13 @@ static const struct dev_pm_ops dwc3_generic_dev_pm_ops = {
 		       dwc3_generic_runtime_idle)
 };
 
+static const struct dwc3_properties fsl_ls1028_dwc3 = {
+	.gsbuscfg0_reqinfo = 0x2222,
+};
+
 static const struct of_device_id dwc3_generic_of_match[] = {
 	{ .compatible = "spacemit,k1-dwc3", },
+	{ .compatible = "fsl,ls1028a-dwc3", &fsl_ls1028_dwc3},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, dwc3_generic_of_match);

-- 
2.34.1



  parent reply	other threads:[~2025-09-26 18:19 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-26 18:19 [PATCH v4 0/4] usb: dwc3: add layerscape platform driver use flatten dwc3 core Frank Li via B4 Relay
2025-09-26 18:19 ` [PATCH v4 1/4] dt-bindings: usb: add missed compatible string for arm64 layerscape Frank Li via B4 Relay
2025-09-26 18:19 ` [PATCH v4 2/4] usb: dwc3: Add software-managed properties for flattened model Frank Li via B4 Relay
2025-09-26 22:24   ` Thinh Nguyen
2025-09-26 18:19 ` Frank Li via B4 Relay [this message]
2025-09-26 22:43   ` [PATCH v4 3/4] usb: dwc3: dwc3-generic-plat: Add layerscape dwc3 support Thinh Nguyen
2025-09-26 23:32     ` Frank Li
2025-09-26 23:52       ` Thinh Nguyen
2025-09-26 18:19 ` [PATCH v4 4/4] arm64: dts: layerscape: add dma-coherent for usb node Frank Li via B4 Relay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250926-ls_dma_coherence-v4-3-21e9c6bdb5cb@nxp.com \
    --to=devnull+frank.li.nxp.com@kernel.org \
    --cc=Frank.Li@nxp.com \
    --cc=Thinh.Nguyen@synopsys.com \
    --cc=bjorn.andersson@oss.qualcomm.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=huang.ze@linux.dev \
    --cc=imx@lists.linux.dev \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox