From: Frank Li <Frank.Li@nxp.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
Shawn Guo <shawnguo@kernel.org>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
bjorn.andersson@oss.qualcomm.com, imx@lists.linux.dev,
Frank Li <Frank.Li@nxp.com>, Ze Huang <huang.ze@linux.dev>
Subject: [PATCH v5 3/4] usb: dwc3: dwc3-generic-plat: Add layerscape dwc3 support
Date: Mon, 29 Sep 2025 10:24:16 -0400 [thread overview]
Message-ID: <20250929-ls_dma_coherence-v5-3-2ebee578eb7e@nxp.com> (raw)
In-Reply-To: <20250929-ls_dma_coherence-v5-0-2ebee578eb7e@nxp.com>
Add layerscape dwc3 support by using flatten dwc3 core library. Layerscape
dwc3 need set gsbuscfg0-reqinfo as 0x2222 when dma-coherence set.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
chagne in v4
- remove of_dma_is_coherent() check
chagne in v4
- rename gsbuscfg0 to gsbuscfg0_reqinfo
- use flatten core's properties.
change in v3 (skipped)
---
drivers/usb/dwc3/dwc3-generic-plat.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c
index af95a527dcc27a7a14d38dcc887f74a888ed91e6..770fedc16bb80dff95ff12c9506728df5ca4b831 100644
--- a/drivers/usb/dwc3/dwc3-generic-plat.c
+++ b/drivers/usb/dwc3/dwc3-generic-plat.c
@@ -29,6 +29,7 @@ static void dwc3_generic_reset_control_assert(void *data)
static int dwc3_generic_probe(struct platform_device *pdev)
{
+ const struct dwc3_properties *properties;
struct dwc3_probe_data probe_data = {};
struct device *dev = &pdev->dev;
struct dwc3_generic *dwc3g;
@@ -75,7 +76,13 @@ static int dwc3_generic_probe(struct platform_device *pdev)
probe_data.dwc = &dwc3g->dwc;
probe_data.res = res;
probe_data.ignore_clocks_and_resets = true;
- probe_data.properties = DWC3_DEFAULT_PROPERTIES;
+
+ properties = of_device_get_match_data(dev);
+ if (properties)
+ probe_data.properties = *properties;
+ else
+ probe_data.properties = DWC3_DEFAULT_PROPERTIES;
+
ret = dwc3_core_probe(&probe_data);
if (ret)
return dev_err_probe(dev, ret, "failed to register DWC3 Core\n");
@@ -146,8 +153,13 @@ static const struct dev_pm_ops dwc3_generic_dev_pm_ops = {
dwc3_generic_runtime_idle)
};
+static const struct dwc3_properties fsl_ls1028_dwc3 = {
+ .gsbuscfg0_reqinfo = 0x2222,
+};
+
static const struct of_device_id dwc3_generic_of_match[] = {
{ .compatible = "spacemit,k1-dwc3", },
+ { .compatible = "fsl,ls1028a-dwc3", &fsl_ls1028_dwc3},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, dwc3_generic_of_match);
--
2.34.1
next prev parent reply other threads:[~2025-09-29 14:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-29 14:24 [PATCH v5 0/4] usb: dwc3: add layerscape platform driver use flatten dwc3 core Frank Li
2025-09-29 14:24 ` [PATCH v5 1/4] dt-bindings: usb: add missed compatible string for arm64 layerscape Frank Li
2025-09-29 14:24 ` [PATCH v5 2/4] usb: dwc3: Add software-managed properties for flattened model Frank Li
2025-09-29 14:24 ` Frank Li [this message]
2025-09-29 23:33 ` [PATCH v5 3/4] usb: dwc3: dwc3-generic-plat: Add layerscape dwc3 support Thinh Nguyen
2025-09-29 14:24 ` [PATCH v5 4/4] arm64: dts: layerscape: add dma-coherent for usb node Frank Li
2025-10-27 14:58 ` Frank Li
2025-10-28 8:57 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250929-ls_dma_coherence-v5-3-2ebee578eb7e@nxp.com \
--to=frank.li@nxp.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=bjorn.andersson@oss.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=huang.ze@linux.dev \
--cc=imx@lists.linux.dev \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox