[PATCH 1/2] usb: mtu3: fix misspelled words

[Randy Dunlap <rdunlap@infradead.org>]

Fix spelling errors as reported by codespell.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
---
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-usb@vger.kernel.org
Cc: linux-doc@vger.kernel.org
---
 drivers/usb/mtu3/mtu3.h      |    4 ++--
 drivers/usb/mtu3/mtu3_core.c |    2 +-
 drivers/usb/mtu3/mtu3_qmu.c  |    2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

--- linux-next.orig/drivers/usb/mtu3/mtu3_core.c
+++ linux-next/drivers/usb/mtu3/mtu3_core.c
@@ -290,7 +290,7 @@ static void mtu3_csr_init(struct mtu3 *m
 
 	/* delay about 0.1us from detecting reset to send chirp-K */
 	mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK);
-	/* enable automatical HWRW from L1 */
+	/* enable automatic HWRW from L1 */
 	mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, LPM_HRWE);
 }
 
--- linux-next.orig/drivers/usb/mtu3/mtu3.h
+++ linux-next/drivers/usb/mtu3/mtu3.h
@@ -76,7 +76,7 @@ struct mtu3_request;
 
 /**
  * Normally the device works on HS or SS, to simplify fifo management,
- * devide fifo into some 512B parts, use bitmap to manage it; And
+ * divide fifo into some 512B parts, use bitmap to manage it; And
  * 128 bits size of bitmap is large enough, that means it can manage
  * up to 64KB fifo size.
  * NOTE: MTU3_EP_FIFO_UNIT should be power of two
@@ -121,7 +121,7 @@ enum mtu3_g_ep0_state {
 };
 
 /**
- * MTU3_DR_FORCE_NONE: automatically switch host and periperal mode
+ * MTU3_DR_FORCE_NONE: automatically switch host and peripheral mode
  *		by IDPIN signal.
  * MTU3_DR_FORCE_HOST: force to enter host mode and override OTG
  *		IDPIN signal.
--- linux-next.orig/drivers/usb/mtu3/mtu3_qmu.c
+++ linux-next/drivers/usb/mtu3/mtu3_qmu.c
@@ -221,7 +221,7 @@ static struct qmu_gpd *advance_deq_gpd(s
 	return ring->dequeue;
 }
 
-/* check if a ring is emtpy */
+/* check if a ring is empty */
 static bool gpd_ring_empty(struct mtu3_gpd_ring *ring)
 {
 	struct qmu_gpd *enq = ring->enqueue;