* [PATCH v2] usb: usb-storage: No additional quirks need to be added to the ECD819-SU3 optical drive.
@ 2025-11-11 1:27 ccc194101
2025-11-11 2:56 ` [usb-storage] " Alan Stern
2025-11-11 20:32 ` Alan Stern
0 siblings, 2 replies; 3+ messages in thread
From: ccc194101 @ 2025-11-11 1:27 UTC (permalink / raw)
To: stern, benjamin.tissoires
Cc: gregkh, linux-usb, usb-storage, linux-kernel, Chen Changcheng
From: Chen Changcheng <chenchangcheng@kylinos.cn>
The optical drive of ECD819-SU3 has the same vid and pid as INIC-3069,
as follows:
T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0
D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=13fd ProdID=3940 Rev= 3.10
S: Manufacturer=HL-DT-ST
S: Product= DVD+-RW GT80N
S: SerialNumber=423349524E4E38303338323439202020
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=144mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=02 Prot=50 Driver=usb-storage
E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
This will result in the optical drive device also adding
the quirks of US_FL_NO_ATA_1X. When performing an erase operation,
it will fail, and the reason for the failure is as follows:
[ 388.967742] sr 5:0:0:0: [sr0] tag#0 Send: scmd 0x00000000d20c33a7
[ 388.967742] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
[ 388.967773] sr 5:0:0:0: [sr0] tag#0 Done: SUCCESS Result: hostbyte=DID_TARGET_FAILURE driverbyte=DRIVER_OK cmd_age=0s
[ 388.967773] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
[ 388.967803] sr 5:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
[ 388.967803] sr 5:0:0:0: [sr0] tag#0 Add. Sense: Invalid field in cdb
[ 388.967803] sr 5:0:0:0: [sr0] tag#0 scsi host busy 1 failed 0
[ 388.967803] sr 5:0:0:0: Notifying upper driver of completion (result 8100002)
[ 388.967834] sr 5:0:0:0: [sr0] tag#0 0 sectors total, 0 bytes done.
Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn>
---
drivers/usb/storage/unusual_uas.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 1477e31d7763..352e9d7324a4 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -98,7 +98,7 @@ UNUSUAL_DEV(0x125f, 0xa94a, 0x0160, 0x0160,
US_FL_NO_ATA_1X),
/* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */
-UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
+UNUSUAL_DEV(0x13fd, 0x3940, 0x0209, 0x0209,
"Initio Corporation",
"INIC-3069",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
base-commit: e9a6fb0bcdd7609be6969112f3fbfcce3b1d4a7c
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [usb-storage] [PATCH v2] usb: usb-storage: No additional quirks need to be added to the ECD819-SU3 optical drive.
2025-11-11 1:27 [PATCH v2] usb: usb-storage: No additional quirks need to be added to the ECD819-SU3 optical drive ccc194101
@ 2025-11-11 2:56 ` Alan Stern
2025-11-11 20:32 ` Alan Stern
1 sibling, 0 replies; 3+ messages in thread
From: Alan Stern @ 2025-11-11 2:56 UTC (permalink / raw)
To: ccc194101
Cc: benjamin.tissoires, gregkh, linux-usb, usb-storage, linux-kernel,
Chen Changcheng
On Tue, Nov 11, 2025 at 09:27:37AM +0800, ccc194101@163.com wrote:
> From: Chen Changcheng <chenchangcheng@kylinos.cn>
>
> The optical drive of ECD819-SU3 has the same vid and pid as INIC-3069,
> as follows:
> T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0
> D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
> P: Vendor=13fd ProdID=3940 Rev= 3.10
> S: Manufacturer=HL-DT-ST
> S: Product= DVD+-RW GT80N
> S: SerialNumber=423349524E4E38303338323439202020
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=144mA
> I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=02 Prot=50 Driver=usb-storage
> E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E: Ad=0a(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
>
> This will result in the optical drive device also adding
> the quirks of US_FL_NO_ATA_1X. When performing an erase operation,
> it will fail, and the reason for the failure is as follows:
> [ 388.967742] sr 5:0:0:0: [sr0] tag#0 Send: scmd 0x00000000d20c33a7
> [ 388.967742] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
> [ 388.967773] sr 5:0:0:0: [sr0] tag#0 Done: SUCCESS Result: hostbyte=DID_TARGET_FAILURE driverbyte=DRIVER_OK cmd_age=0s
> [ 388.967773] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
> [ 388.967803] sr 5:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
> [ 388.967803] sr 5:0:0:0: [sr0] tag#0 Add. Sense: Invalid field in cdb
> [ 388.967803] sr 5:0:0:0: [sr0] tag#0 scsi host busy 1 failed 0
> [ 388.967803] sr 5:0:0:0: Notifying upper driver of completion (result 8100002)
> [ 388.967834] sr 5:0:0:0: [sr0] tag#0 0 sectors total, 0 bytes done.
>
> Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn>
> ---
Your patch description should mention the fact that the bcdDevice range
for the existing unusual_uas.h entry is too broad, and so the patch
restricts it to cover just the value of the ECD819-SU3 that was reported
originally. Otherwise readers won't understand where the 0x0209 values
came from.
Alan Stern
> drivers/usb/storage/unusual_uas.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
> index 1477e31d7763..352e9d7324a4 100644
> --- a/drivers/usb/storage/unusual_uas.h
> +++ b/drivers/usb/storage/unusual_uas.h
> @@ -98,7 +98,7 @@ UNUSUAL_DEV(0x125f, 0xa94a, 0x0160, 0x0160,
> US_FL_NO_ATA_1X),
>
> /* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */
> -UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
> +UNUSUAL_DEV(0x13fd, 0x3940, 0x0209, 0x0209,
> "Initio Corporation",
> "INIC-3069",
> USB_SC_DEVICE, USB_PR_DEVICE, NULL,
>
> base-commit: e9a6fb0bcdd7609be6969112f3fbfcce3b1d4a7c
> --
> 2.25.1
>
> --
> You received this message because you are subscribed to the Google Groups "USB Mass Storage on Linux" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to usb-storage+unsubscribe@lists.one-eyed-alien.net.
> To view this discussion visit https://groups.google.com/a/lists.one-eyed-alien.net/d/msgid/usb-storage/20251111012737.13662-1-ccc194101%40163.com.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] usb: usb-storage: No additional quirks need to be added to the ECD819-SU3 optical drive.
2025-11-11 1:27 [PATCH v2] usb: usb-storage: No additional quirks need to be added to the ECD819-SU3 optical drive ccc194101
2025-11-11 2:56 ` [usb-storage] " Alan Stern
@ 2025-11-11 20:32 ` Alan Stern
1 sibling, 0 replies; 3+ messages in thread
From: Alan Stern @ 2025-11-11 20:32 UTC (permalink / raw)
To: ccc194101
Cc: Alan Swanson, benjamin.tissoires, gregkh, linux-usb, usb-storage,
linux-kernel, Chen Changcheng
On Tue, Nov 11, 2025 at 09:27:37AM +0800, ccc194101@163.com wrote:
> From: Chen Changcheng <chenchangcheng@kylinos.cn>
>
> The optical drive of ECD819-SU3 has the same vid and pid as INIC-3069,
> as follows:
> T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0
> D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
> P: Vendor=13fd ProdID=3940 Rev= 3.10
> S: Manufacturer=HL-DT-ST
> S: Product= DVD+-RW GT80N
> S: SerialNumber=423349524E4E38303338323439202020
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=144mA
> I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=02 Prot=50 Driver=usb-storage
> E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
> E: Ad=0a(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
>
> This will result in the optical drive device also adding
> the quirks of US_FL_NO_ATA_1X. When performing an erase operation,
> it will fail, and the reason for the failure is as follows:
> [ 388.967742] sr 5:0:0:0: [sr0] tag#0 Send: scmd 0x00000000d20c33a7
> [ 388.967742] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
> [ 388.967773] sr 5:0:0:0: [sr0] tag#0 Done: SUCCESS Result: hostbyte=DID_TARGET_FAILURE driverbyte=DRIVER_OK cmd_age=0s
> [ 388.967773] sr 5:0:0:0: [sr0] tag#0 CDB: ATA command pass through(12)/Blank a1 11 00 00 00 00 00 00 00 00 00 00
> [ 388.967803] sr 5:0:0:0: [sr0] tag#0 Sense Key : Illegal Request [current]
> [ 388.967803] sr 5:0:0:0: [sr0] tag#0 Add. Sense: Invalid field in cdb
> [ 388.967803] sr 5:0:0:0: [sr0] tag#0 scsi host busy 1 failed 0
> [ 388.967803] sr 5:0:0:0: Notifying upper driver of completion (result 8100002)
> [ 388.967834] sr 5:0:0:0: [sr0] tag#0 0 sectors total, 0 bytes done.
>
> Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn>
> ---
> drivers/usb/storage/unusual_uas.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
> index 1477e31d7763..352e9d7324a4 100644
> --- a/drivers/usb/storage/unusual_uas.h
> +++ b/drivers/usb/storage/unusual_uas.h
> @@ -98,7 +98,7 @@ UNUSUAL_DEV(0x125f, 0xa94a, 0x0160, 0x0160,
> US_FL_NO_ATA_1X),
>
> /* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */
> -UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
> +UNUSUAL_DEV(0x13fd, 0x3940, 0x0209, 0x0209,
> "Initio Corporation",
> "INIC-3069",
> USB_SC_DEVICE, USB_PR_DEVICE, NULL,
A couple of things...
First, the 0x0209 suggestion I made earlier was a mistake; it should
have been 0x0309, as reported by Alan Swanson.
Second, are you sure that your device doesn't need the IGNORE_RESIDUE
flag, like his bluray drive?
Alan Stern
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2025-11-11 20:32 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-11-11 1:27 [PATCH v2] usb: usb-storage: No additional quirks need to be added to the ECD819-SU3 optical drive ccc194101
2025-11-11 2:56 ` [usb-storage] " Alan Stern
2025-11-11 20:32 ` Alan Stern
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).