From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
Niklas Neronin <niklas.neronin@linux.intel.com>,
Peter Chen <peter.chen@kernel.org>,
Peter Chen <peter.chen@kerne.org>,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 06/23] usb: xhci: add helper to read PORTSC register
Date: Wed, 19 Nov 2025 16:24:00 +0200 [thread overview]
Message-ID: <20251119142417.2820519-7-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20251119142417.2820519-1-mathias.nyman@linux.intel.com>
From: Niklas Neronin <niklas.neronin@linux.intel.com>
Add a dedicated helper function to read the USB Port Status and Control
(PORTSC) register. This complements xhci_portsc_writel() and improves code
clarity by providing a clear counterpart for reading the register.
Suggested-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Peter Chen <peter.chen@kerne.org>
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-debugfs.c | 4 +-
drivers/usb/host/xhci-hub.c | 68 ++++++++++++++++-----------------
drivers/usb/host/xhci-pci.c | 2 +-
drivers/usb/host/xhci-ring.c | 2 +-
drivers/usb/host/xhci-tegra.c | 12 +++---
drivers/usb/host/xhci.c | 14 +++++--
drivers/usb/host/xhci.h | 1 +
7 files changed, 55 insertions(+), 48 deletions(-)
diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c
index df99fffc6120..d32ac8f84691 100644
--- a/drivers/usb/host/xhci-debugfs.c
+++ b/drivers/usb/host/xhci-debugfs.c
@@ -329,7 +329,7 @@ static int xhci_portsc_show(struct seq_file *s, void *unused)
u32 portsc;
char str[XHCI_MSG_MAX];
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
seq_printf(s, "%s\n", xhci_decode_portsc(str, portsc));
return 0;
@@ -359,7 +359,7 @@ static ssize_t xhci_port_write(struct file *file, const char __user *ubuf,
return count;
spin_lock_irqsave(&xhci->lock, flags);
/* compliance mode can only be enabled on ports in RxDetect */
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
if ((portsc & PORT_PLS_MASK) != XDEV_RXDETECT) {
spin_unlock_irqrestore(&xhci->lock, flags);
return -EPERM;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index d0300c097803..2927b8a80327 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -299,7 +299,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
*/
memset(port_removable, 0, sizeof(port_removable));
for (i = 0; i < ports; i++) {
- portsc = readl(rhub->ports[i]->addr);
+ portsc = xhci_portsc_readl(rhub->ports[i]);
/* If a device is removable, PORTSC reports a 0, same as in the
* hub descriptor DeviceRemovable bits.
*/
@@ -356,7 +356,7 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
port_removable = 0;
/* bit 0 is reserved, bit 1 is for port 1, etc. */
for (i = 0; i < ports; i++) {
- portsc = readl(rhub->ports[i]->addr);
+ portsc = xhci_portsc_readl(rhub->ports[i]);
if (portsc & PORT_DEV_REMOVE)
port_removable |= 1 << (i + 1);
}
@@ -566,13 +566,13 @@ static void xhci_disable_port(struct xhci_hcd *xhci, struct xhci_port *port)
return;
}
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
portsc = xhci_port_state_to_neutral(portsc);
/* Write 1 to disable the port */
xhci_portsc_writel(port, portsc | PORT_PE);
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
xhci_dbg(xhci, "disable port %d-%d, portsc: 0x%x\n",
hcd->self.busnum, port->hcd_portnum + 1, portsc);
}
@@ -622,7 +622,7 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
}
/* Change bits are all write 1 to clear */
xhci_portsc_writel(port, port_status | status);
- port_status = readl(port->addr);
+ port_status = xhci_portsc_readl(port);
xhci_dbg(xhci, "clear port%d %s change, portsc: 0x%x\n",
wIndex + 1, port_change_bit, port_status);
@@ -650,7 +650,7 @@ static void xhci_set_port_power(struct xhci_hcd *xhci, struct xhci_port *port,
u32 temp;
hcd = port->rhub->hcd;
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
xhci_dbg(xhci, "set port power %d-%d %s, portsc: 0x%x\n",
hcd->self.busnum, port->hcd_portnum + 1, on ? "ON" : "OFF", temp);
@@ -660,7 +660,7 @@ static void xhci_set_port_power(struct xhci_hcd *xhci, struct xhci_port *port,
if (on) {
/* Power on */
xhci_portsc_writel(port, temp | PORT_POWER);
- readl(port->addr);
+ xhci_portsc_readl(port);
} else {
/* Power off */
xhci_portsc_writel(port, temp & ~PORT_POWER);
@@ -801,7 +801,7 @@ void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
u32 temp;
u32 portsc;
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
temp = xhci_port_state_to_neutral(portsc);
temp &= ~PORT_PLS_MASK;
temp |= PORT_LINK_STROBE | link_state;
@@ -817,7 +817,7 @@ static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
{
u32 temp;
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
temp = xhci_port_state_to_neutral(temp);
if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT)
@@ -844,7 +844,7 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port,
{
u32 temp;
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if (temp & port_bit) {
temp = xhci_port_state_to_neutral(temp);
temp |= port_bit;
@@ -1002,7 +1002,7 @@ static int xhci_handle_usb2_port_link_resume(struct xhci_port *port,
}
xhci_ring_device(xhci, port->slot_id);
} else {
- int port_status = readl(port->addr);
+ int port_status = xhci_portsc_readl(port);
xhci_warn(xhci, "Port resume timed out, port %d-%d: 0x%x\n",
hcd->self.busnum, wIndex + 1, port_status);
@@ -1263,7 +1263,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
wIndex--;
port = ports[portnum1 - 1];
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
@@ -1309,7 +1309,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
port = ports[portnum1 - 1];
wIndex--;
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
@@ -1319,7 +1319,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
/* FIXME: What new port features do we need to support? */
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if ((temp & PORT_PLS_MASK) != XDEV_U0) {
/* Resume the port to U0 first */
xhci_set_link_state(xhci, port, XDEV_U0);
@@ -1331,7 +1331,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
* a port unless the port reports that it is in the
* enabled (PED = ‘1’,PLS < ‘3’) state.
*/
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
xhci_warn(xhci, "USB core suspending port %d-%d not in U0/U1/U2\n",
@@ -1354,11 +1354,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
msleep(10); /* wait device to enter */
spin_lock_irqsave(&xhci->lock, flags);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
bus_state->suspended_ports |= 1 << wIndex;
break;
case USB_PORT_FEAT_LINK_STATE:
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
/* Disable port */
if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
xhci_dbg(xhci, "Disable port %d-%d\n",
@@ -1372,7 +1372,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
PORT_OCC | PORT_RC | PORT_PLC |
PORT_CEC;
xhci_portsc_writel(port, temp | PORT_PE);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
break;
}
@@ -1381,7 +1381,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
xhci_dbg(xhci, "Enable port %d-%d\n",
hcd->self.busnum, portnum1);
xhci_set_link_state(xhci, port, link_state);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
break;
}
@@ -1414,7 +1414,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
hcd->self.busnum, portnum1);
xhci_set_link_state(xhci, port, link_state);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
break;
}
/* Port must be enabled */
@@ -1462,7 +1462,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
xhci_dbg(xhci, "missing U0 port change event for port %d-%d\n",
hcd->self.busnum, portnum1);
spin_lock_irqsave(&xhci->lock, flags);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
break;
}
@@ -1480,12 +1480,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
spin_unlock_irqrestore(&xhci->lock, flags);
while (retries--) {
usleep_range(4000, 8000);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if ((temp & PORT_PLS_MASK) == XDEV_U3)
break;
}
spin_lock_irqsave(&xhci->lock, flags);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
bus_state->suspended_ports |= 1 << wIndex;
}
break;
@@ -1502,20 +1502,20 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp = (temp | PORT_RESET);
xhci_portsc_writel(port, temp);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
xhci_dbg(xhci, "set port reset, actual port %d-%d status = 0x%x\n",
hcd->self.busnum, portnum1, temp);
break;
case USB_PORT_FEAT_REMOTE_WAKE_MASK:
xhci_set_remote_wake_mask(xhci, port, wake_mask);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
xhci_dbg(xhci, "set port remote wake mask, actual port %d-%d status = 0x%x\n",
hcd->self.busnum, portnum1, temp);
break;
case USB_PORT_FEAT_BH_PORT_RESET:
temp |= PORT_WR;
xhci_portsc_writel(port, temp);
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
break;
case USB_PORT_FEAT_U1_TIMEOUT:
if (hcd->speed < HCD_USB3)
@@ -1547,7 +1547,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
goto error;
}
/* unblock any posted writes */
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
break;
case ClearPortFeature:
if (!portnum1 || portnum1 > max_ports)
@@ -1556,7 +1556,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
port = ports[portnum1 - 1];
wIndex--;
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
@@ -1566,7 +1566,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp = xhci_port_state_to_neutral(temp);
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- temp = readl(port->addr);
+ temp = xhci_portsc_readl(port);
xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
xhci_dbg(xhci, "PORTSC %04x\n", temp);
if (temp & PORT_RESET)
@@ -1681,7 +1681,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
/* For each port, did anything change? If so, set that bit in buf. */
for (i = 0; i < max_ports; i++) {
- temp = readl(ports[i]->addr);
+ temp = xhci_portsc_readl(ports[i]);
if (temp == ~(u32)0) {
xhci_hc_died(xhci);
retval = -ENODEV;
@@ -1750,7 +1750,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
u32 t1, t2;
int retries = 10;
retry:
- t1 = readl(ports[port_index]->addr);
+ t1 = xhci_portsc_readl(ports[port_index]);
t2 = xhci_port_state_to_neutral(t1);
portsc_buf[port_index] = 0;
@@ -1849,7 +1849,7 @@ static bool xhci_port_missing_cas_quirk(struct xhci_port *port)
{
u32 portsc;
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
/* if any of these are set we are not stuck */
if (portsc & (PORT_CONNECT | PORT_CAS))
@@ -1864,7 +1864,7 @@ static bool xhci_port_missing_cas_quirk(struct xhci_port *port)
portsc |= PORT_WR;
xhci_portsc_writel(port, portsc);
/* flush write */
- readl(port->addr);
+ xhci_portsc_readl(port);
return true;
}
@@ -1911,7 +1911,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
}
port_index = max_ports;
while (port_index--) {
- portsc = readl(ports[port_index]->addr);
+ portsc = xhci_portsc_readl(ports[port_index]);
/* warm reset CAS limited ports stuck in polling/compliance */
if ((xhci->quirks & XHCI_MISSING_CAS) &&
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index b1192648aee7..2ba0261a29c1 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -898,7 +898,7 @@ static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup)
for (i = 0; i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
port = &xhci->hw_ports[i];
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
if ((portsc & PORT_PLS_MASK) != XDEV_U3)
continue;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index aa7fc4d6f97c..88022d221c70 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2027,7 +2027,7 @@ static void handle_port_status(struct xhci_hcd *xhci, union xhci_trb *event)
hcd = port->rhub->hcd;
bus_state = &port->rhub->bus_state;
hcd_portnum = port->hcd_portnum;
- portsc = readl(port->addr);
+ portsc = xhci_portsc_readl(port);
xhci_dbg(xhci, "Port change event, %d-%d, id %d, portsc: 0x%x\n",
hcd->self.busnum, hcd_portnum + 1, port_id, portsc);
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 5255b1002893..1e23f198a005 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -2036,7 +2036,7 @@ static bool xhci_hub_ports_suspended(struct xhci_hub *hub)
u32 value;
for (i = 0; i < hub->num_ports; i++) {
- value = readl(hub->ports[i]->addr);
+ value = xhci_portsc_readl(hub->ports[i]);
if ((value & PORT_PE) == 0)
continue;
@@ -2162,7 +2162,7 @@ static void tegra_xhci_enable_phy_sleepwalk_wake(struct tegra_xusb *tegra)
if (!is_host_mode_phy(tegra, i, j))
continue;
- portsc = readl(rhub->ports[index]->addr);
+ portsc = xhci_portsc_readl(rhub->ports[index]);
speed = tegra_xhci_portsc_to_speed(tegra, portsc);
tegra_xusb_padctl_enable_phy_sleepwalk(padctl, phy, speed);
tegra_xusb_padctl_enable_phy_wake(padctl, phy);
@@ -2257,7 +2257,7 @@ static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool is_auto_resume)
for (i = 0; i < xhci->usb2_rhub.num_ports; i++) {
if (!xhci->usb2_rhub.ports[i])
continue;
- portsc = readl(xhci->usb2_rhub.ports[i]->addr);
+ portsc = xhci_portsc_readl(xhci->usb2_rhub.ports[i]);
tegra->lp0_utmi_pad_mask &= ~BIT(i);
if (((portsc & PORT_PLS_MASK) == XDEV_U3) || ((portsc & DEV_SPEED_MASK) == XDEV_FS))
tegra->lp0_utmi_pad_mask |= BIT(i);
@@ -2790,7 +2790,7 @@ static int tegra_xhci_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value,
while (i--) {
if (!test_bit(i, &bus_state->resuming_ports))
continue;
- portsc = readl(ports[i]->addr);
+ portsc = xhci_portsc_readl(ports[i]);
if ((portsc & PORT_PLS_MASK) == XDEV_RESUME)
tegra_phy_xusb_utmi_pad_power_on(
tegra_xusb_get_phy(tegra, "usb2", (int) i));
@@ -2808,7 +2808,7 @@ static int tegra_xhci_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value,
if (!index || index > rhub->num_ports)
return -EPIPE;
ports = rhub->ports;
- portsc = readl(ports[port]->addr);
+ portsc = xhci_portsc_readl(ports[port]);
if (portsc & PORT_CONNECT)
tegra_phy_xusb_utmi_pad_power_on(phy);
}
@@ -2827,7 +2827,7 @@ static int tegra_xhci_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value,
if ((type_req == ClearPortFeature) && (value == USB_PORT_FEAT_C_CONNECTION)) {
ports = rhub->ports;
- portsc = readl(ports[port]->addr);
+ portsc = xhci_portsc_readl(ports[port]);
if (!(portsc & PORT_CONNECT)) {
/* We don't suspend the PAD while HNP role swap happens on the OTG
* port
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 84e109dbabe8..6b47b218cb24 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -48,6 +48,12 @@ void xhci_portsc_writel(struct xhci_port *port, u32 val)
}
EXPORT_SYMBOL_GPL(xhci_portsc_writel);
+u32 xhci_portsc_readl(struct xhci_port *port)
+{
+ return readl(port->addr);
+}
+EXPORT_SYMBOL_GPL(xhci_portsc_readl);
+
static bool td_on_ring(struct xhci_td *td, struct xhci_ring *ring)
{
struct xhci_segment *seg;
@@ -380,7 +386,7 @@ static void compliance_mode_recovery(struct timer_list *t)
return;
for (i = 0; i < rhub->num_ports; i++) {
- temp = readl(rhub->ports[i]->addr);
+ temp = xhci_portsc_readl(rhub->ports[i]);
if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) {
/*
* Compliance Mode Detected. Letting USB Core
@@ -903,7 +909,7 @@ static void xhci_disable_hub_port_wake(struct xhci_hcd *xhci,
spin_lock_irqsave(&xhci->lock, flags);
for (i = 0; i < rhub->num_ports; i++) {
- portsc = readl(rhub->ports[i]->addr);
+ portsc = xhci_portsc_readl(rhub->ports[i]);
t1 = xhci_port_state_to_neutral(portsc);
t2 = t1;
@@ -943,7 +949,7 @@ static bool xhci_pending_portevent(struct xhci_hcd *xhci)
port_index = xhci->usb2_rhub.num_ports;
ports = xhci->usb2_rhub.ports;
while (port_index--) {
- portsc = readl(ports[port_index]->addr);
+ portsc = xhci_portsc_readl(ports[port_index]);
if (portsc & PORT_CHANGE_MASK ||
(portsc & PORT_PLS_MASK) == XDEV_RESUME)
return true;
@@ -951,7 +957,7 @@ static bool xhci_pending_portevent(struct xhci_hcd *xhci)
port_index = xhci->usb3_rhub.num_ports;
ports = xhci->usb3_rhub.ports;
while (port_index--) {
- portsc = readl(ports[port_index]->addr);
+ portsc = xhci_portsc_readl(ports[port_index]);
if (portsc & (PORT_CHANGE_MASK | PORT_CAS) ||
(portsc & PORT_PLS_MASK) == XDEV_RESUME)
return true;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 3b6b2d0d4c60..bddf9c15d813 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1962,6 +1962,7 @@ void xhci_add_interrupter(struct xhci_hcd *xhci, unsigned int intr_num);
int xhci_usb_endpoint_maxp(struct usb_device *udev,
struct usb_host_endpoint *host_ep);
void xhci_portsc_writel(struct xhci_port *port, u32 val);
+u32 xhci_portsc_readl(struct xhci_port *port);
/* xHCI roothub code */
void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
--
2.43.0
next prev parent reply other threads:[~2025-11-19 14:24 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-19 14:23 [PATCH 00/23] xhci features for usb-next Mathias Nyman
2025-11-19 14:23 ` [PATCH 01/23] usb: xhci: limit run_graceperiod for only usb 3.0 devices Mathias Nyman
2025-11-19 14:23 ` [PATCH 02/23] xhci: Add helper to find trb from its dma address Mathias Nyman
2025-11-19 14:23 ` [PATCH 03/23] xhci: simplify and rework trb_in_td() Mathias Nyman
2025-11-19 14:23 ` [PATCH 04/23] usb: xhci: rework xhci_decode_portsc() Mathias Nyman
2025-11-19 14:23 ` [PATCH 05/23] usb: xhci: add tracing for PORTSC register writes Mathias Nyman
2025-11-19 14:24 ` Mathias Nyman [this message]
2025-11-19 14:24 ` [PATCH 07/23] usb: xhci: add USB Port Register Set struct Mathias Nyman
2025-11-19 14:24 ` [PATCH 08/23] usb: xhci: implement " Mathias Nyman
2025-11-19 14:24 ` [PATCH 09/23] usb: xhci: Assume that endpoints halt as specified Mathias Nyman
2025-11-19 14:24 ` [PATCH 10/23] usb: xhci: Don't unchain link TRBs on quirky HCs Mathias Nyman
2025-11-19 14:24 ` [PATCH 11/23] usb: xhci: replace use of system_wq with system_percpu_wq Mathias Nyman
2025-11-19 14:24 ` [PATCH 12/23] usb: xhci: remove deprecated TODO comment Mathias Nyman
2025-11-19 14:24 ` [PATCH 13/23] usb: xhci: remove unused trace operation and argument Mathias Nyman
2025-11-19 14:24 ` [PATCH 14/23] usb: xhci: use cached HCSPARAMS1 value Mathias Nyman
2025-11-19 14:24 ` [PATCH 15/23] usb: xhci: simplify handling of Structural Parameters 1 values Mathias Nyman
2025-11-19 14:24 ` [PATCH 16/23] usb: xhci: limit number of ports to 127 Mathias Nyman
2025-11-19 14:24 ` [PATCH 17/23] usb: xhci: limit number of interrupts to 128 Mathias Nyman
2025-11-19 14:24 ` [PATCH 18/23] usb: xhci: improve xhci-caps.h comments Mathias Nyman
2025-11-19 14:24 ` [PATCH 19/23] usb: xhci: simplify Isochronous Scheduling Threshold handling Mathias Nyman
2025-11-19 14:24 ` [PATCH 20/23] usb: xhci: simplify Max Scratchpad buffer macros Mathias Nyman
2025-11-19 14:24 ` [PATCH 21/23] usb: xhci: drop xhci-caps.h dependence on xhci-ext-caps.h Mathias Nyman
2025-11-19 14:24 ` [PATCH 22/23] usb: xhci: standardize single bit-field macros Mathias Nyman
2025-11-19 14:24 ` [PATCH 23/23] usb: xhci: Add debugfs support for xHCI Port Link Info (PORTLI) register Mathias Nyman
2026-03-04 9:42 ` Michal Pecio
2026-03-04 14:25 ` Mathias Nyman
2026-03-04 16:40 ` Michal Pecio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251119142417.2820519-7-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=niklas.neronin@linux.intel.com \
--cc=peter.chen@kerne.org \
--cc=peter.chen@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox