Re: [PATCH] USB: of: filter disabled device node

[Greg KH <gregkh@linuxfoundation.org>]

On Mon, Nov 24, 2025 at 10:22:18PM +0800, Pin-yen Lin wrote:
> Hi Greg,
> 
> On Mon, Nov 24, 2025 at 10:01 PM Greg KH <gregkh@linuxfoundation.org> wrote:
> >
> > On Sat, Nov 22, 2025 at 07:31:47PM +0800, jerry xzq wrote:
> > > On Sat, Nov 22, 2025 at 7:26 PM Zhengqiao Xia <jerry.xzq@gmail.com> wrote:
> > >
> > > > We should not point the of_node of a USB device to a disabled devicetree
> > > > node. Otherwise, the interface under this USB device will not be able
> > > > to register.
> > > >
> > > > Signed-off-by: Zhengqiao Xia <jerry.xzq@gmail.com>
> > > > ---
> > > >  drivers/usb/core/of.c | 3 +++
> > > >  1 file changed, 3 insertions(+)
> > > >
> > > > diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c
> > > > index 763e4122ed5b3..6bb577e711811 100644
> > > > --- a/drivers/usb/core/of.c
> > > > +++ b/drivers/usb/core/of.c
> > > > @@ -31,6 +31,9 @@ struct device_node *usb_of_get_device_node(struct
> > > > usb_device *hub, int port1)
> > > >                 if (of_property_read_u32(node, "reg", &reg))
> > > >                         continue;
> > > >
> > > > +               if (!of_device_is_available(node))
> > > > +                       continue;
> > > > +
> > > >                 if (reg == port1)
> > > >                         return node;
> > > >         }
> > > > --
> > > > 2.34.1
> > > >
> > > >  Supplementing questions from the previous email:
> > >
> > > > What changed to require this?  What commit id does this fix?
> > > > And what devices have a disabled devicetree node?
> > >
> > > fixes: 01fdf179f4b064d4c9d30(usb: core: skip interfaces disabled in
> > > devicetree )
> > >
> > > Connect a USB device directly to the USB port, for me, LTE RW101.
> >
> > Why?  Why not just us the normal USB device topology?  Why is this in DT
> > at all?
> 
> In our use case, the USB hub and the USB devices (e.g., modem card,
> USB camera) are fixed on the board, and describing them allows us to:
> (1) Describe the extra resources for the USB devices, like the usages
> in drivers/misc/onboard_usb_dev.c. They are mostly USB hubs that
> require extra power or reset pin, but there are also USB device
> usages.

The USB devices should NOT be in DT at all, only for hub controls that
you need the extra pin controls please.

> (2) Let the userspace know which devices are fixed on the board, which
> makes it trustable.

There is different ways to do this, NOT in dt.

> > > However, a disabled node is attached to the DTS node of this port.
> >
> > Why?
> 
> This is the usage from a downstream DTS that hasn't been upstreamed.

There's nothing we can do about that.  Please work to get it upstream.

> The USB hub and devices are defined in a DTSI file, and another DTS
> inherits it but wants to disable those USB devices. We expected that
> disabling them should be the same as removing them.

No, just disable them from userspace properly.

> > > &xhci3 {
> > >         status = "okay";
> > >
> > >         /* 2.x hub on port 1 */
> > >         usb_hub_2_x: hub@1 {
> > >                 compatible = "usbbda,5411";
> > >                 reg = <1>;
> > >                 vdd-supply = <&pp3300_s3>;
> > >                 peer-hub = <&usb_hub_3_x>;
> > >                 status = "disabled";
> > >
> > >                 ports {
> > >                         #address-cells = <1>;
> > >                         #size-cells = <0>;
> > >                         port@1 {
> > >                                 reg = <1>;
> > >                                 usb_hub_dsp1_hs: endpoint { };
> > >                         };
> > >                         port@2 {
> > >                                 reg = <2>;
> > >                                 usb_hub_dsp2_hs: endpoint { };
> > >                         };
> > >                         port@3 {
> > >                                 reg = <3>;
> > >                                 usb_hub_dsp3_hs: endpoint { };
> > >                         };
> > >                         port@4 {
> > >                                 reg = <4>;
> > >
> > >                                 /* On-board WWAN card */
> > >                                 usb_hub_dsp4_hs: endpoint { };
> >
> > That's the thing I don't want to see, why is that WWAN card described
> > here?  Why can't the normal USB device discovery find it and use it
> > properly?
> >
> > >                         };
> > >                 };
> > >         };
> > >
> > > Based on the current code, the of_node of this directly connected LTE
> > > device is hub.
> >
> > But why is that needed?
> >
> > > If there is only one LTE interface, then the of_node of this interface
> > > is also the hub.
> >
> > Again, why?
> 
> We haven't had a driver for the LTE card on the linux mainline.

Why is it not merged upstream?  That should be a very simple thing to
get accepted.

> But,
> it is using M.2 USB interface and requires reset and enable pins, so I
> believe we want to describe it as a USB device in DT, and implement
> the resource control in onboard_usb_dev.c.

No, that is not how USB devices work, they should control themselves.

thanks,

greg k-h