From: Johan Hovold <johan@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Vladimir Zapolskiy <vz@mleia.com>,
Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>,
Alan Stern <stern@rowland.harvard.edu>,
Ma Ke <make24@iscas.ac.cn>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan@kernel.org>,
stable@vger.kernel.org
Subject: [PATCH 3/5] usb: ohci-nxp: fix device leak on probe failure
Date: Thu, 18 Dec 2025 15:19:43 +0100 [thread overview]
Message-ID: <20251218141945.5884-4-johan@kernel.org> (raw)
In-Reply-To: <20251218141945.5884-1-johan@kernel.org>
Make sure to drop the reference taken when looking up the PHY I2C device
during probe on probe failure (e.g. probe deferral) and on driver
unbind.
Fixes: 73108aa90cbf ("USB: ohci-nxp: Use isp1301 driver")
Cc: stable@vger.kernel.org # 3.5
Reported-by: Ma Ke <make24@iscas.ac.cn>
Link: https://lore.kernel.org/lkml/20251117013428.21840-1-make24@iscas.ac.cn/
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/host/ohci-nxp.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index 24d5a1dc5056..9a05828bbba1 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -169,13 +169,13 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (ret)
- goto fail_disable;
+ goto err_put_client;
dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
if (usb_disabled()) {
dev_err(&pdev->dev, "USB is disabled\n");
ret = -ENODEV;
- goto fail_disable;
+ goto err_put_client;
}
/* Enable USB host clock */
@@ -183,7 +183,7 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
if (IS_ERR(usb_host_clk)) {
dev_err(&pdev->dev, "failed to acquire and start USB OHCI clock\n");
ret = PTR_ERR(usb_host_clk);
- goto fail_disable;
+ goto err_put_client;
}
isp1301_configure();
@@ -192,7 +192,7 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
if (!hcd) {
dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
ret = -ENOMEM;
- goto fail_disable;
+ goto err_put_client;
}
hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
@@ -222,7 +222,8 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
ohci_nxp_stop_hc();
fail_resource:
usb_put_hcd(hcd);
-fail_disable:
+err_put_client:
+ put_device(&isp1301_i2c_client->dev);
isp1301_i2c_client = NULL;
return ret;
}
@@ -234,6 +235,7 @@ static void ohci_hcd_nxp_remove(struct platform_device *pdev)
usb_remove_hcd(hcd);
ohci_nxp_stop_hc();
usb_put_hcd(hcd);
+ put_device(&isp1301_i2c_client->dev);
isp1301_i2c_client = NULL;
}
--
2.51.2
next prev parent reply other threads:[~2025-12-18 14:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-18 14:19 [PATCH 0/5] USB: lpc32xx: fix error handling Johan Hovold
2025-12-18 14:19 ` [PATCH 1/5] usb: gadget: lpc32xx_udc: fix clock imbalance in error path Johan Hovold
2025-12-18 14:19 ` [PATCH 2/5] usb: phy: isp1301: fix non-OF device reference imbalance Johan Hovold
2025-12-18 14:19 ` Johan Hovold [this message]
2025-12-18 14:19 ` [PATCH 4/5] usb: gadget: lpc32xx_udc: clean up probe error labels Johan Hovold
2025-12-18 14:19 ` [PATCH 5/5] usb: ohci-nxp: " Johan Hovold
2025-12-18 15:09 ` Alan Stern
2025-12-18 15:20 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251218141945.5884-4-johan@kernel.org \
--to=johan@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=make24@iscas.ac.cn \
--cc=piotr.wojtaszczyk@timesys.com \
--cc=stable@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=vz@mleia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).