[PATCH v2 5/5] usb: ohci-nxp: clean up probe error labels

[Johan Hovold <johan@kernel.org>]

Error labels should be named after what they do rather than after from
where they are jumped to.

Rename the probe error labels for consistency and to improve
readability.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/host/ohci-nxp.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index 509ca7d8d513..7663f2aa35e9 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -169,13 +169,13 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
 
 	ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 	if (ret)
-		goto fail_disable;
+		goto err_put_client;
 
 	dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
 	if (usb_disabled()) {
 		dev_err(&pdev->dev, "USB is disabled\n");
 		ret = -ENODEV;
-		goto fail_disable;
+		goto err_put_client;
 	}
 
 	/* Enable USB host clock */
@@ -183,7 +183,7 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
 	if (IS_ERR(usb_host_clk)) {
 		dev_err(&pdev->dev, "failed to acquire and start USB OHCI clock\n");
 		ret = PTR_ERR(usb_host_clk);
-		goto fail_disable;
+		goto err_put_client;
 	}
 
 	isp1301_configure();
@@ -192,13 +192,13 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
 	if (!hcd) {
 		dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
 		ret = -ENOMEM;
-		goto fail_disable;
+		goto err_put_client;
 	}
 
 	hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(hcd->regs)) {
 		ret = PTR_ERR(hcd->regs);
-		goto fail_resource;
+		goto err_put_hcd;
 	}
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
@@ -206,7 +206,7 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		ret = -ENXIO;
-		goto fail_resource;
+		goto err_put_hcd;
 	}
 
 	ohci_nxp_start_hc();
@@ -220,9 +220,9 @@ static int ohci_hcd_nxp_probe(struct platform_device *pdev)
 	}
 
 	ohci_nxp_stop_hc();
-fail_resource:
+err_put_hcd:
 	usb_put_hcd(hcd);
-fail_disable:
+err_put_client:
 	put_device(&isp1301_i2c_client->dev);
 	isp1301_i2c_client = NULL;
 	return ret;
-- 
2.51.2