Re: [PATCH 13/21] usb: typec: fusb302: Remove IRQF_ONESHOT

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

On Fri, Jan 23, 2026 at 12:36:59PM +0100, Sebastian Andrzej Siewior wrote:
> Passing IRQF_ONESHOT ensures that the interrupt source is masked until
> the secondary (threaded) handler is done. If only a primary handler is
> used then the flag makes no sense because the interrupt can not fire
> (again) while its handler is running.
> The flag also disallows force-threading of the primary handler and the
> irq-core will warn about this.
> 
> Remove IRQF_ONESHOT from irqflags.
> 
> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> Fixes: 309b6341d5570 ("usb: typec: fusb302: Revert incorrect threaded irq fix")
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> ---
>  drivers/usb/typec/tcpm/fusb302.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
> index 870a71f953f6c..19ff8217818e7 100644
> --- a/drivers/usb/typec/tcpm/fusb302.c
> +++ b/drivers/usb/typec/tcpm/fusb302.c
> @@ -1756,8 +1756,7 @@ static int fusb302_probe(struct i2c_client *client)
>  	}
>  
>  	ret = request_irq(chip->gpio_int_n_irq, fusb302_irq_intn,
> -			  IRQF_ONESHOT | IRQF_TRIGGER_LOW,
> -			  "fsc_interrupt_int_n", chip);
> +			  IRQF_TRIGGER_LOW, "fsc_interrupt_int_n", chip);
>  	if (ret < 0) {
>  		dev_err(dev, "cannot request IRQ for GPIO Int_N, ret=%d", ret);
>  		goto tcpm_unregister_port;
> -- 
> 2.51.0
> 

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>