public inbox for linux-usb@vger.kernel.org
 help / color / mirror / Atom feed
From: Niklas Neronin <niklas.neronin@linux.intel.com>
To: mathias.nyman@linux.intel.com
Cc: linux-usb@vger.kernel.org,
	Niklas Neronin <niklas.neronin@linux.intel.com>
Subject: [PATCH 4/9] usb: xhci: clean up 'wValue' handling in xhci_hub_control()
Date: Thu, 19 Mar 2026 14:56:19 +0100	[thread overview]
Message-ID: <20260319135626.3077643-5-niklas.neronin@linux.intel.com> (raw)
In-Reply-To: <20260319135626.3077643-1-niklas.neronin@linux.intel.com>

Several hub control requests encode a descriptor type in the upper byte
of 'wValue'. Clean this up by extracting the descriptor type into a local
variable and using it for all relevant requests.

Replace magic value (0x02) with the appropriate macro (HUB_EXT_PORT_STATUS)

This improves readability and makes the handling of 'wValue' consistent.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
---
 drivers/usb/host/xhci-hub.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index daa04ac811fc..b57fe0967e10 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1209,6 +1209,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	u16 wake_mask;
 	u8 timeout;
 	u8 test_mode;
+	u8 desc_type;
 	struct xhci_hub *rhub;
 	struct xhci_port **ports;
 	struct xhci_port *port;
@@ -1226,13 +1227,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		memset(buf, 0, 4);
 		break;
 	case GetHubDescriptor:
+		desc_type = (wValue & 0xff00) >> 8;
 		/* Check to make sure userspace is asking for the USB 3.0 hub
 		 * descriptor for the USB 3.0 roothub.  If not, we stall the
 		 * endpoint, like external hubs do.
 		 */
 		if (hcd->speed >= HCD_USB3 &&
-				(wLength < USB_DT_SS_HUB_SIZE ||
-				 wValue != (USB_DT_SS_HUB << 8))) {
+		    (wLength < USB_DT_SS_HUB_SIZE || desc_type != USB_DT_SS_HUB)) {
 			xhci_dbg(xhci, "Wrong hub descriptor type for "
 					"USB 3.0 roothub.\n");
 			goto error;
@@ -1241,7 +1242,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				(struct usb_hub_descriptor *) buf);
 		break;
 	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
-		if ((wValue & 0xff00) != (USB_DT_BOS << 8))
+		desc_type = (wValue & 0xff00) >> 8;
+		if (desc_type != USB_DT_BOS)
 			goto error;
 
 		if (hcd->speed < HCD_USB3)
@@ -1272,7 +1274,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
 		/* if USB 3.1 extended port status return additional 4 bytes */
-		if (wValue == 0x02) {
+		if (wValue == HUB_EXT_PORT_STATUS) {
 			u32 port_li;
 
 			if (hcd->speed < HCD_USB31 || wLength != 8) {
-- 
2.50.1


  parent reply	other threads:[~2026-03-19 13:57 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-19 13:56 [PATCH 0/9] usb: xhci: rework USB request parameter handling Niklas Neronin
2026-03-19 13:56 ` [PATCH 1/9] usb: xhci: stop treating 'wIndex' as a mutable port number Niklas Neronin
2026-03-19 14:10   ` Oliver Neukum
2026-03-19 13:56 ` [PATCH 2/9] usb: xhci: rename 'wIndex' parameters to 'portnum' Niklas Neronin
2026-03-19 13:56 ` [PATCH 3/9] usb: xhci: clean up handling of upper bits in SetPortFeature wIndex Niklas Neronin
2026-03-19 13:56 ` Niklas Neronin [this message]
2026-03-19 13:56 ` [PATCH 5/9] usb: xhci: separate use of USB Chapter 11 PLS macros from xHCI-specific PLS macros Niklas Neronin
2026-03-19 13:56 ` [PATCH 6/9] usb: xhci: add PORTPMSC variable to xhci_hub_control() Niklas Neronin
2026-03-19 13:56 ` [PATCH 7/9] usb: xhci: add PORTSC " Niklas Neronin
2026-03-19 13:56 ` [PATCH 8/9] usb: xhci: rename parameter to match argument 'portsc' Niklas Neronin
2026-03-19 13:56 ` [PATCH 9/9] usb: xhci: cleanup xhci_hub_report_usb3_link_state() Niklas Neronin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260319135626.3077643-5-niklas.neronin@linux.intel.com \
    --to=niklas.neronin@linux.intel.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox