From: Niklas Neronin <niklas.neronin@linux.intel.com>
To: mathias.nyman@linux.intel.com
Cc: linux-usb@vger.kernel.org, raoxu@uniontech.com,
michal.pecio@gmail.com,
Niklas Neronin <niklas.neronin@linux.intel.com>
Subject: [PATCH 4/9] usb: xhci: move reserving command ring trb
Date: Fri, 27 Mar 2026 13:34:35 +0100 [thread overview]
Message-ID: <20260327123441.806564-5-niklas.neronin@linux.intel.com> (raw)
In-Reply-To: <20260327123441.806564-1-niklas.neronin@linux.intel.com>
Move the command ring TRB reservation from xhci_mem_init() to xhci_init().
Function xhci_mem_init() is intended for memory allocation,
while xhci_init() is for initialization.
This split allows xhci_init() to be reused when resuming from S4
suspend-to-disk.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
---
drivers/usb/host/xhci-mem.c | 7 -------
drivers/usb/host/xhci.c | 6 ++++++
2 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index d4a9dbed8f16..45638ab13635 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2485,13 +2485,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "First segment DMA is 0x%pad",
&xhci->cmd_ring->first_seg->dma);
- /*
- * Reserve one command ring TRB for disabling LPM.
- * Since the USB core grabs the shared usb_bus bandwidth mutex before
- * disabling LPM, we only need to reserve one TRB for all devices.
- */
- xhci->cmd_ring_reserved_trbs++;
-
/* Allocate and set up primary interrupter 0 with an event ring. */
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Allocating primary event ring");
xhci->interrupters = kcalloc_node(xhci->max_interrupters, sizeof(*xhci->interrupters),
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index a04b1365bb6a..facadf0f0d1e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -564,6 +564,12 @@ static int xhci_init(struct usb_hcd *hcd)
/* Set the Number of Device Slots Enabled to the maximum supported value */
xhci_enable_max_dev_slots(xhci);
+ /*
+ * Reserve one command ring TRB for disabling LPM.
+ * Since the USB core grabs the shared usb_bus bandwidth mutex before
+ * disabling LPM, we only need to reserve one TRB for all devices.
+ */
+ xhci->cmd_ring_reserved_trbs = 1;
/* Set the address in the Command Ring Control register */
xhci_set_cmd_ring_deq(xhci);
--
2.50.1
next prev parent reply other threads:[~2026-03-27 12:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-27 12:34 [PATCH 0/9] xhci: usb: optimize resuming from S4 (suspend-to-disk) Niklas Neronin
2026-03-27 12:34 ` [PATCH 1/9] usb: xhci: simplify CMRT initialization logic Niklas Neronin
2026-03-27 12:34 ` [PATCH 2/9] usb: xhci: relocate Restore/Controller error check Niklas Neronin
2026-03-27 12:34 ` [PATCH 3/9] usb: xhci: factor out roothub bandwidth cleanup Niklas Neronin
2026-03-27 12:34 ` Niklas Neronin [this message]
2026-03-27 12:34 ` [PATCH 5/9] usb: xhci: move ring initialization Niklas Neronin
2026-03-27 12:34 ` [PATCH 6/9] usb: xhci: move initialization for lifetime objects Niklas Neronin
2026-03-27 12:34 ` [PATCH 7/9] usb: xhci: split core allocation and initialization Niklas Neronin
2026-03-27 12:34 ` [PATCH 8/9] usb: xhci: improve debug messages during suspend Niklas Neronin
2026-03-27 12:34 ` [PATCH 9/9] usb: xhci: optimize resuming from S4 (suspend-to-disk) Niklas Neronin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260327123441.806564-5-niklas.neronin@linux.intel.com \
--to=niklas.neronin@linux.intel.com \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@linux.intel.com \
--cc=michal.pecio@gmail.com \
--cc=raoxu@uniontech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox