From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
Niklas Neronin <niklas.neronin@linux.intel.com>,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 08/25] usb: xhci: move ring initialization
Date: Thu, 2 Apr 2026 16:13:25 +0300 [thread overview]
Message-ID: <20260402131342.2628648-9-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20260402131342.2628648-1-mathias.nyman@linux.intel.com>
From: Niklas Neronin <niklas.neronin@linux.intel.com>
Move ring initialization from xhci_ring_alloc() to xhci_ring_init().
Call xhci_ring_init() after xhci_ring_alloc(); in the future,
it can also be used to re-initialize the ring during resume.
Additionally, remove xhci_dbg_trace() from xhci_mem_init(). The command
ring's first segment DMA address is now printed during the trace call in
xhci_ring_init().
This refactoring lays also the groundwork for eventually replacing:
* xhci_dbc_ring_init()
* xhci_clear_command_ring()
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-mem.c | 19 ++++++++++++++-----
drivers/usb/host/xhci.c | 3 +++
drivers/usb/host/xhci.h | 1 +
3 files changed, 18 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 45638ab13635..ca4463eebc49 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -129,6 +129,13 @@ static void xhci_initialize_ring_segments(struct xhci_hcd *xhci, struct xhci_rin
ring->last_seg->trbs[TRBS_PER_SEGMENT - 1].link.control |= cpu_to_le32(LINK_TOGGLE);
}
+void xhci_ring_init(struct xhci_hcd *xhci, struct xhci_ring *ring)
+{
+ xhci_initialize_ring_segments(xhci, ring);
+ xhci_initialize_ring_info(ring);
+ trace_xhci_ring_alloc(ring);
+}
+
/*
* Link the src ring segments to the dst ring.
* Set Toggle Cycle for the new ring if needed.
@@ -389,9 +396,6 @@ struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci, unsigned int num_segs,
if (ret)
goto fail;
- xhci_initialize_ring_segments(xhci, ring);
- xhci_initialize_ring_info(ring);
- trace_xhci_ring_alloc(ring);
return ring;
fail:
@@ -668,6 +672,8 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
cur_ring = stream_info->stream_rings[cur_stream];
if (!cur_ring)
goto cleanup_rings;
+
+ xhci_ring_init(xhci, cur_ring);
cur_ring->stream_id = cur_stream;
cur_ring->trb_address_map = &stream_info->trb_address_map;
/* Set deq ptr, cycle bit, and stream context type */
@@ -1011,6 +1017,8 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
if (!dev->eps[0].ring)
goto fail;
+ xhci_ring_init(xhci, dev->eps[0].ring);
+
dev->udev = udev;
/* Point to output device context in dcbaa. */
@@ -1492,6 +1500,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
virt_dev->eps[ep_index].skip = false;
ep_ring = virt_dev->eps[ep_index].new_ring;
+ xhci_ring_init(xhci, ep_ring);
/* Fill the endpoint context */
ep_ctx->ep_info = cpu_to_le32(EP_MAX_ESIT_PAYLOAD_HI(max_esit_payload) |
@@ -2370,6 +2379,8 @@ xhci_create_secondary_interrupter(struct usb_hcd *hcd, unsigned int segs,
if (!ir)
return NULL;
+ xhci_ring_init(xhci, ir->event_ring);
+
spin_lock_irq(&xhci->lock);
if (!intr_num) {
/* Find available secondary interrupter, interrupter 0 is reserved for primary */
@@ -2482,8 +2493,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
goto fail;
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Allocated command ring at %p", xhci->cmd_ring);
- xhci_dbg_trace(xhci, trace_xhci_dbg_init, "First segment DMA is 0x%pad",
- &xhci->cmd_ring->first_seg->dma);
/* Allocate and set up primary interrupter 0 with an event ring. */
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Allocating primary event ring");
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b9fa941425c5..dd495dc740c3 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -564,6 +564,8 @@ static int xhci_init(struct usb_hcd *hcd)
/* Set the Number of Device Slots Enabled to the maximum supported value */
xhci_enable_max_dev_slots(xhci);
+ /* Initialize the Command ring */
+ xhci_ring_init(xhci, xhci->cmd_ring);
/*
* Reserve one command ring TRB for disabling LPM.
* Since the USB core grabs the shared usb_bus bandwidth mutex before
@@ -583,6 +585,7 @@ static int xhci_init(struct usb_hcd *hcd)
xhci_set_dev_notifications(xhci);
/* Initialize the Primary interrupter */
+ xhci_ring_init(xhci, xhci->interrupters[0]->event_ring);
xhci_add_interrupter(xhci, 0);
xhci->interrupters[0]->isoc_bei_interval = AVOID_BEI_INTERVAL_MAX;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 1bef4301e2b4..06f6da4d982f 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1824,6 +1824,7 @@ void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
unsigned int num_trbs, gfp_t flags);
void xhci_initialize_ring_info(struct xhci_ring *ring);
+void xhci_ring_init(struct xhci_hcd *xhci, struct xhci_ring *ring);
void xhci_free_endpoint_ring(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
unsigned int ep_index);
--
2.43.0
next prev parent reply other threads:[~2026-04-02 13:17 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-02 13:13 [PATCH 00/25] xhci features for usb-next Mathias Nyman
2026-04-02 13:13 ` [PATCH 01/25] xhci: use BIT macro Mathias Nyman
2026-04-02 13:13 ` [PATCH 02/25] usb: xhci: Simplify clearing the Event Interrupt bit Mathias Nyman
2026-04-02 13:13 ` [PATCH 03/25] usb: xhci: Fix debugfs bandwidth reporting Mathias Nyman
2026-04-02 13:13 ` [PATCH 04/25] usb: xhci: simplify CMRT initialization logic Mathias Nyman
2026-04-02 13:13 ` [PATCH 05/25] usb: xhci: relocate Restore/Controller error check Mathias Nyman
2026-04-02 13:13 ` [PATCH 06/25] usb: xhci: factor out roothub bandwidth cleanup Mathias Nyman
2026-04-02 13:13 ` [PATCH 07/25] usb: xhci: move reserving command ring trb Mathias Nyman
2026-04-02 13:13 ` Mathias Nyman [this message]
2026-04-02 13:13 ` [PATCH 09/25] usb: xhci: move initialization for lifetime objects Mathias Nyman
2026-04-02 13:13 ` [PATCH 10/25] usb: xhci: split core allocation and initialization Mathias Nyman
2026-04-02 13:13 ` [PATCH 11/25] usb: xhci: improve debug messages during suspend Mathias Nyman
2026-04-02 13:13 ` [PATCH 12/25] usb: xhci: optimize resuming from S4 (suspend-to-disk) Mathias Nyman
2026-04-02 13:13 ` [PATCH 13/25] usb: xhci: stop treating 'wIndex' as a mutable port number Mathias Nyman
2026-04-02 13:13 ` [PATCH 14/25] usb: xhci: rename 'wIndex' parameters to 'portnum' Mathias Nyman
2026-04-02 13:13 ` [PATCH 15/25] usb: xhci: clean up handling of upper bits in SetPortFeature wIndex Mathias Nyman
2026-04-02 13:13 ` [PATCH 16/25] usb: xhci: clean up 'wValue' handling in xhci_hub_control() Mathias Nyman
2026-04-02 13:13 ` [PATCH 17/25] usb: xhci: separate use of USB Chapter 11 PLS macros from xHCI-specific PLS macros Mathias Nyman
2026-04-02 13:13 ` [PATCH 18/25] usb: xhci: add PORTPMSC variable to xhci_hub_control() Mathias Nyman
2026-04-02 13:13 ` [PATCH 19/25] usb: xhci: add PORTSC " Mathias Nyman
2026-04-02 13:13 ` [PATCH 20/25] usb: xhci: rename parameter to match argument 'portsc' Mathias Nyman
2026-04-02 13:13 ` [PATCH 21/25] usb: xhci: cleanup xhci_hub_report_usb3_link_state() Mathias Nyman
2026-04-02 13:13 ` [PATCH 22/25] usb: xhci: simpilfy resume root hub code Mathias Nyman
2026-04-02 13:13 ` [PATCH 23/25] usb: xhci: move roothub port limit validation Mathias Nyman
2026-04-02 13:13 ` [PATCH 24/25] usb: xhci: remove duplicate '0x' prefix Mathias Nyman
2026-04-02 13:13 ` [PATCH 25/25] usb: xhci: Make usb_host_endpoint.hcpriv survive endpoint_disable() Mathias Nyman
2026-04-11 14:41 ` Question on follow-up work for secondary interrupters raoxu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260402131342.2628648-9-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=niklas.neronin@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox