From: Konrad Dybcio <konradybcio@kernel.org>
To: Andreas Noever <andreas.noever@gmail.com>,
Mika Westerberg <westeri@kernel.org>,
Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
usb4-upstream@oss.qualcomm.com,
Raghavendra Thoorpu <rthoorpu@qti.qualcomm.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Subject: [PATCH v2 3/4] thunderbolt: Require nhi->ops be valid
Date: Tue, 28 Apr 2026 20:49:46 +0200 [thread overview]
Message-ID: <20260428-topic-usb4_nonpcie_prepwork-v2-3-452fb9d63f77@oss.qualcomm.com> (raw)
In-Reply-To: <20260428-topic-usb4_nonpcie_prepwork-v2-0-452fb9d63f77@oss.qualcomm.com>
From: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Because of how fundamental ops->init_interrupts() is, it no longer
makes sense to consider cases where nhi->ops is NULL.
Drop some boilerplate around it and add a single sanity-check in
nhi_probe() instead.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
drivers/thunderbolt/nhi.c | 32 ++++++++++++++++++--------------
drivers/thunderbolt/switch.c | 6 +++---
2 files changed, 21 insertions(+), 17 deletions(-)
diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index 3ceca434155d..917069726a9f 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -560,7 +560,7 @@ static struct tb_ring *tb_ring_alloc(struct tb_nhi *nhi, u32 hop, int size,
if (!ring->descriptors)
goto err_free_ring;
- if (nhi->ops && nhi->ops->request_ring_irq) {
+ if (nhi->ops->request_ring_irq) {
if (nhi->ops->request_ring_irq(ring, flags & RING_FLAG_NO_SUSPEND))
goto err_free_descs;
}
@@ -571,7 +571,7 @@ static struct tb_ring *tb_ring_alloc(struct tb_nhi *nhi, u32 hop, int size,
return ring;
err_release_msix:
- if (nhi->ops && nhi->ops->release_ring_irq)
+ if (nhi->ops->release_ring_irq)
nhi->ops->release_ring_irq(ring);
err_free_descs:
dma_free_coherent(ring->nhi->dev,
@@ -780,7 +780,7 @@ void tb_ring_free(struct tb_ring *ring)
}
spin_unlock_irq(&ring->nhi->lock);
- if (nhi->ops && nhi->ops->release_ring_irq)
+ if (nhi->ops->release_ring_irq)
nhi->ops->release_ring_irq(ring);
dma_free_coherent(ring->nhi->dev,
@@ -931,7 +931,7 @@ static int __nhi_suspend_noirq(struct device *dev, bool wakeup)
if (ret)
return ret;
- if (nhi->ops && nhi->ops->suspend_noirq) {
+ if (nhi->ops->suspend_noirq) {
ret = nhi->ops->suspend_noirq(tb->nhi, wakeup);
if (ret)
return ret;
@@ -1011,7 +1011,7 @@ static int nhi_resume_noirq(struct device *dev)
if ((nhi->ops->is_present && !nhi->ops->is_present(nhi))) {
nhi->going_away = true;
} else {
- if (nhi->ops && nhi->ops->resume_noirq) {
+ if (nhi->ops->resume_noirq) {
ret = nhi->ops->resume_noirq(nhi);
if (ret)
return ret;
@@ -1054,7 +1054,7 @@ static int nhi_runtime_suspend(struct device *dev)
if (ret)
return ret;
- if (nhi->ops && nhi->ops->runtime_suspend) {
+ if (nhi->ops->runtime_suspend) {
ret = nhi->ops->runtime_suspend(tb->nhi);
if (ret)
return ret;
@@ -1068,7 +1068,7 @@ static int nhi_runtime_resume(struct device *dev)
struct tb_nhi *nhi = tb->nhi;
int ret;
- if (nhi->ops && nhi->ops->runtime_resume) {
+ if (nhi->ops->runtime_resume) {
ret = nhi->ops->runtime_resume(nhi);
if (ret)
return ret;
@@ -1094,7 +1094,7 @@ void nhi_shutdown(struct tb_nhi *nhi)
}
nhi_disable_interrupts(nhi);
- if (nhi->ops && nhi->ops->shutdown)
+ if (nhi->ops->shutdown)
nhi->ops->shutdown(nhi);
}
@@ -1158,6 +1158,12 @@ int nhi_probe(struct tb_nhi *nhi)
struct tb *tb;
int res;
+ if (!nhi->ops)
+ return dev_err_probe(dev, -EINVAL, "NHI ops not set\n");
+
+ if (!nhi->ops->init_interrupts)
+ return dev_err_probe(dev, -EINVAL, "missing required NHI ops\n");
+
nhi->hop_count = ioread32(nhi->iobase + REG_CAPS) & 0x3ff;
dev_dbg(dev, "total paths: %d\n", nhi->hop_count);
@@ -1174,11 +1180,9 @@ int nhi_probe(struct tb_nhi *nhi)
nhi_disable_interrupts(nhi);
nhi_enable_int_throttling(nhi);
- if (nhi->ops && nhi->ops->init_interrupts) {
- res = nhi->ops->init_interrupts(nhi);
- if (res)
- return dev_err_probe(dev, res, "cannot enable interrupts, aborting\n");
- }
+ res = nhi->ops->init_interrupts(nhi);
+ if (res)
+ return dev_err_probe(dev, res, "cannot enable interrupts, aborting\n");
spin_lock_init(&nhi->lock);
@@ -1186,7 +1190,7 @@ int nhi_probe(struct tb_nhi *nhi)
if (res)
return dev_err_probe(dev, res, "failed to set DMA mask\n");
- if (nhi->ops && nhi->ops->init) {
+ if (nhi->ops->init) {
res = nhi->ops->init(nhi);
if (res)
return res;
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 9647650ee02d..5f09460af1b8 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -251,7 +251,7 @@ static int nvm_authenticate(struct tb_switch *sw, bool auth_only)
sw->nvm->authenticating = true;
if (!tb_route(sw)) {
- if (nhi->ops && nhi->ops->pre_nvm_auth)
+ if (nhi->ops->pre_nvm_auth)
nhi->ops->pre_nvm_auth(nhi);
ret = nvm_authenticate_host_dma_port(sw);
} else {
@@ -2782,7 +2782,7 @@ static int tb_switch_add_dma_port(struct tb_switch *sw)
nvm_get_auth_status(sw, &status);
if (status) {
if (!tb_route(sw)) {
- if (nhi->ops && nhi->ops->post_nvm_auth)
+ if (nhi->ops->post_nvm_auth)
nhi->ops->post_nvm_auth(nhi);
}
return 0;
@@ -2799,7 +2799,7 @@ static int tb_switch_add_dma_port(struct tb_switch *sw)
/* Now we can allow root port to suspend again */
if (!tb_route(sw)) {
- if (nhi->ops && nhi->ops->post_nvm_auth)
+ if (nhi->ops->post_nvm_auth)
nhi->ops->post_nvm_auth(nhi);
}
--
2.54.0
next prev parent reply other threads:[~2026-04-28 18:49 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-28 18:49 [PATCH v2 0/4] Prepwork for non-PCIe NHI/TBT hosts Konrad Dybcio
2026-04-28 18:49 ` [PATCH v2 1/4] thunderbolt: Move pci_device out of tb_nhi Konrad Dybcio
2026-05-04 6:40 ` Mika Westerberg
2026-04-28 18:49 ` [PATCH v2 2/4] thunderbolt: Separate out common NHI bits Konrad Dybcio
2026-05-04 6:54 ` Mika Westerberg
2026-04-28 18:49 ` Konrad Dybcio [this message]
2026-04-28 18:49 ` [PATCH v2 4/4] thunderbolt: Add some more descriptive probe error messages Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260428-topic-usb4_nonpcie_prepwork-v2-3-452fb9d63f77@oss.qualcomm.com \
--to=konradybcio@kernel.org \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=rthoorpu@qti.qualcomm.com \
--cc=usb4-upstream@oss.qualcomm.com \
--cc=westeri@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox