From: Deepanshu Kartikey <kartikey406@gmail.com>
To: valentina.manea.m@gmail.com, shuah@kernel.org, i@zenithal.me,
gregkh@linuxfoundation.org
Cc: yuyang.du@intel.com, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org,
Deepanshu Kartikey <kartikey406@gmail.com>,
syzbot+8753715f05759f1a10de@syzkaller.appspotmail.com
Subject: [PATCH v3] usbip: vhci_hcd: let the driver core manage the sysfs attributes
Date: Sun, 16 Aug 2026 11:40:34 +0530 [thread overview]
Message-ID: <20260816061034.17769-1-kartikey406@gmail.com> (raw)
The vhci attribute group is created in vhci_start() and removed in
vhci_stop(), guarded by usb_hcd_is_primary_hcd(). Both run from
usb_add_hcd()/usb_remove_hcd(), which are called once per hcd, so the
attach attribute is live while only one of the two hcds exists: it is
created during the first usb_add_hcd() before vhci_hcd_ss is set, and it
survives the first usb_put_hcd() on removal. A concurrent write to attach
can therefore reach a NULL or freed vhci_hcd_ss.
Register the group as dev_groups on the platform driver instead, so the
driver core creates the files before probe and removes them after remove
returns, and drop the sysfs_create_group()/sysfs_remove_group() calls from
the driver. The attributes have always been created only on vhci_hcd.0;
an is_visible() callback keeps them there.
vhci_init_attr_group() is moved into vhci_hcd_init() ahead of
platform_driver_register() so the group is populated before the core
reads it. The attribute array is still built at runtime because the
number of status attributes comes from CONFIG_USBIP_VHCI_NR_HCS and the
preprocessor cannot emit a variable number of __ATTR() declarations.
Fixes: 1c9de5bf4286 ("usbip: vhci-hcd: Add USB3 SuperSpeed support")
Reported-by: syzbot+8753715f05759f1a10de@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8753715f05759f1a10de
Tested-by: syzbot+8753715f05759f1a10de@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/20260815143427.19066-1-kartikey406@gmail.com/T/ [v1]
Link: https://lore.kernel.org/all/20260816015051.13184-1-kartikey406@gmail.com/T/ [v2]
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
---
v3:
- make vhci_attr_group static, drop its extern from vhci.h (Greg)
- drop stray blank line in vhci_hcd_init()
- fix indentation in vhci_sysfs.c
v2:
- use dev_groups instead of moving sysfs_create_group() into probe (Greg)
- add is_visible() to keep the attributes on vhci_hcd.0 only
- move vhci_init_attr_group() into vhci_hcd_init()
drivers/usb/usbip/vhci.h | 2 +-
drivers/usb/usbip/vhci_hcd.c | 36 ++++++++++------------------------
drivers/usb/usbip/vhci_sysfs.c | 21 +++++++++++++++++++-
3 files changed, 31 insertions(+), 28 deletions(-)
diff --git a/drivers/usb/usbip/vhci.h b/drivers/usb/usbip/vhci.h
index 5659dce1526e..f3993238f91d 100644
--- a/drivers/usb/usbip/vhci.h
+++ b/drivers/usb/usbip/vhci.h
@@ -120,7 +120,7 @@ struct vhci_hcd {
extern int vhci_num_controllers;
extern struct vhci *vhcis;
-extern struct attribute_group vhci_attr_group;
+extern const struct attribute_group *vhci_groups[];
/* vhci_hcd.c */
void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed);
diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 39e8faf4c18c..22b9bad7ca31 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -1199,7 +1199,6 @@ static int vhci_start(struct usb_hcd *hcd)
{
struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
int id, rhport;
- int err;
usbip_dbg_vhci_hc("enter vhci_start\n");
@@ -1230,40 +1229,17 @@ static int vhci_start(struct usb_hcd *hcd)
return -EINVAL;
}
- /* vhci_hcd is now ready to be controlled through sysfs */
- if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
- err = vhci_init_attr_group();
- if (err) {
- dev_err(hcd_dev(hcd), "init attr group failed, err = %d\n", err);
- return err;
- }
- err = sysfs_create_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
- if (err) {
- dev_err(hcd_dev(hcd), "create sysfs files failed, err = %d\n", err);
- vhci_finish_attr_group();
- return err;
- }
- dev_info(hcd_dev(hcd), "created sysfs %s\n", hcd_name(hcd));
- }
-
return 0;
}
static void vhci_stop(struct usb_hcd *hcd)
{
struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
- int id, rhport;
+ int rhport;
usbip_dbg_vhci_hc("stop VHCI controller\n");
- /* 1. remove the userland interface of vhci_hcd */
- id = hcd_name_to_id(hcd_name(hcd));
- if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
- sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
- vhci_finish_attr_group();
- }
-
- /* 2. shutdown all the ports of vhci_hcd */
+ /* shutdown all the ports of vhci_hcd */
for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
@@ -1513,6 +1489,7 @@ static struct platform_driver vhci_driver = {
.resume = vhci_hcd_resume,
.driver = {
.name = driver_name,
+ .dev_groups = vhci_groups,
},
};
@@ -1541,6 +1518,10 @@ static int __init vhci_hcd_init(void)
if (vhcis == NULL)
return -ENOMEM;
+ ret = vhci_init_attr_group();
+ if (ret)
+ goto err_init_attr_group;
+
ret = platform_driver_register(&vhci_driver);
if (ret)
goto err_driver_register;
@@ -1568,6 +1549,8 @@ static int __init vhci_hcd_init(void)
err_add_hcd:
platform_driver_unregister(&vhci_driver);
err_driver_register:
+ vhci_finish_attr_group();
+err_init_attr_group:
kfree(vhcis);
return ret;
}
@@ -1576,6 +1559,7 @@ static void __exit vhci_hcd_exit(void)
{
del_platform_devices();
platform_driver_unregister(&vhci_driver);
+ vhci_finish_attr_group();
kfree(vhcis);
}
diff --git a/drivers/usb/usbip/vhci_sysfs.c b/drivers/usb/usbip/vhci_sysfs.c
index a7ede6fb3da9..d87d9e449d72 100644
--- a/drivers/usb/usbip/vhci_sysfs.c
+++ b/drivers/usb/usbip/vhci_sysfs.c
@@ -497,8 +497,27 @@ static void finish_status_attrs(void)
kfree(status_attrs);
}
-struct attribute_group vhci_attr_group = {
+static umode_t vhci_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct platform_device *pdev = to_platform_device(kobj_to_dev(kobj));
+
+ /*
+ * The attributes control every controller and have always lived on
+ * vhci_hcd.0 only. Keep them there now that the driver core creates
+ * the group for each device.
+ */
+ return pdev->id == 0 ? attr->mode : 0;
+}
+
+static struct attribute_group vhci_attr_group = {
.attrs = NULL,
+ .is_visible = vhci_attr_is_visible,
+};
+
+const struct attribute_group *vhci_groups[] = {
+ &vhci_attr_group,
+ NULL,
};
int vhci_init_attr_group(void)
--
2.43.0
reply other threads:[~2026-08-16 6:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260816061034.17769-1-kartikey406@gmail.com \
--to=kartikey406@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=i@zenithal.me \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=shuah@kernel.org \
--cc=syzbot+8753715f05759f1a10de@syzkaller.appspotmail.com \
--cc=valentina.manea.m@gmail.com \
--cc=yuyang.du@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox