From: Josua Mayer <josua@solid-run.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Benjamin Bara <benjamin.bara@skidata.com>,
Linus Walleij <linusw@kernel.org>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: Jon Nettleton <jon@solid-run.com>,
Mikhail Anikin <mikhail.anikin@solid-run.com>,
Yazan Shhady <yazan.shhady@solid-run.com>,
linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
linux-gpio@vger.kernel.org, Josua Mayer <josua@solid-run.com>
Subject: [PATCH v4 7/7] arm64: dts: renesas: rzg2l(c)/rzv2l hb-iiot: add dsi panel dt overlay
Date: Wed, 02 Sep 2026 13:50:15 +0200 [thread overview]
Message-ID: <20260902-rzg2-sr-boards-v4-7-4a456a422fee@solid-run.com> (raw)
In-Reply-To: <20260902-rzg2-sr-boards-v4-0-4a456a422fee@solid-run.com>
The SolidRun Hummingboard IIoT features a DSI connector supporting
touch-screen displays and is usable with RZ/G2L, RZ/G2LC and RZ/V2L
SoMs.
Provide addon for the Winstar WJ70N3TYJHMNG0 1024x600 dsi panel.
Add the addon in Makefile for all supported SoMs SoC targets.
Signed-off-by: Josua Mayer <josua@solid-run.com>
---
arch/arm64/boot/dts/renesas/Makefile | 8 +++
...hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtso | 74 ++++++++++++++++++++++
2 files changed, 82 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 69b1f75156016..0bc2bbff9370f 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -170,6 +170,8 @@ r9a07g044c2-hummingboard-iiot-emmc-dtbs := r9a07g044c2-hummingboard-iiot.dtb rzg
dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-iiot-emmc.dtb
r9a07g044c2-hummingboard-iiot-microsd-dtbs := r9a07g044c2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-microsd.dtbo
dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-iiot-microsd.dtb
+r9a07g044c2-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0-dtbs := r9a07g044c2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtbo
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtb
r9a07g044c2-hummingboard-iiot-rs485-a-dtbs := r9a07g044c2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-rs485-a.dtbo
dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-hummingboard-iiot-rs485-a.dtb
r9a07g044c2-hummingboard-iiot-rs485-b-dtbs := r9a07g044c2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-rs485-b.dtbo
@@ -186,6 +188,9 @@ dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-hummingboard-iiot-emmc.dtb
dtb-$(CONFIG_ARCH_R9A07G044) += rzg2l-hummingboard-iiot-microsd.dtbo
r9a07g044l2-hummingboard-iiot-microsd-dtbs := r9a07g044l2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-microsd.dtbo
dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-hummingboard-iiot-microsd.dtb
+dtb-$(CONFIG_ARCH_R9A07G044) += rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtbo
+r9a07g044l2-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0-dtbs := r9a07g044l2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtbo
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtb
dtb-$(CONFIG_ARCH_R9A07G044) += rzg2l-hummingboard-iiot-rs485-a.dtbo
r9a07g044l2-hummingboard-iiot-rs485-a-dtbs := r9a07g044l2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-rs485-a.dtbo
dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-hummingboard-iiot-rs485-a.dtb
@@ -205,6 +210,9 @@ dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-hummingboard-iiot-emmc.dtb
dtb-$(CONFIG_ARCH_R9A07G054) += rzg2l-hummingboard-iiot-microsd.dtbo
r9a07g054l2-hummingboard-iiot-microsd-dtbs := r9a07g054l2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-microsd.dtbo
dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-hummingboard-iiot-microsd.dtb
+dtb-$(CONFIG_ARCH_R9A07G054) += rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtbo
+r9a07g054l2-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0-dtbs := r9a07g054l2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtbo
+dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtb
dtb-$(CONFIG_ARCH_R9A07G054) += rzg2l-hummingboard-iiot-rs485-a.dtbo
r9a07g054l2-hummingboard-iiot-rs485-a-dtbs := r9a07g054l2-hummingboard-iiot.dtb rzg2l-hummingboard-iiot-rs485-a.dtbo
dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-hummingboard-iiot-rs485-a.dtb
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtso b/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtso
new file mode 100644
index 0000000000000..e43a38d5330e6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2l-hummingboard-iiot-panel-dsi-WJ70N3TYJHMNG0.dtso
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ *
+ * Overlay for enabling HummingBoard IIoT MIPI-DSI connector
+ * with Winstar WJ70N3TYJHMNG0 panel.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+ dsi_backlight: dsi-backlight {
+ compatible = "gpio-backlight";
+ gpios = <&tca6408_u48 3 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c_dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@41 {
+ compatible = "ilitek,ili2130";
+ reg = <0x41>;
+ /*
+ * Touchscreen fires short active-low pulses which level trigger
+ * on i2c gpio expander can miss. Trigger on falling edge instead.
+ */
+ interrupts-extended = <&tca6416_u21 13 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tca6408_u48 6 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ panel@0 {
+ /* This is a Winstar panel, but the ronbo panel uses same controls. */
+ compatible = "ronbo,rb070d30";
+ reg = <0>;
+ /* reset is active-low but driver inverts it internally */
+ reset-gpios = <&tca6408_u48 1 GPIO_ACTIVE_HIGH>;
+ backlight = <&dsi_backlight>;
+ power-gpios = <&tca6408_u48 2 GPIO_ACTIVE_HIGH>;
+ shlr-gpios = <&tca6408_u48 4 GPIO_ACTIVE_LOW>;
+ updn-gpios = <&tca6408_u48 5 GPIO_ACTIVE_HIGH>;
+ vcc-lcd-supply = <®_dsi_panel>;
+
+ port {
+ dsi_in_panel: endpoint {
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ mipi_dsi_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&dsi_in_panel>;
+ };
+ };
+ };
+};
+
+&du {
+ status = "okay";
+};
--
2.51.0
next prev parent reply other threads:[~2026-09-02 11:50 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-02 11:50 [PATCH v4 0/7] arm64: dts: renesas: Add various SolidRun RZ/G2 based boards Josua Mayer
2026-09-02 11:50 ` [PATCH v4 1/7] dt-bindings: soc: " Josua Mayer
2026-09-02 11:50 ` [PATCH v4 2/7] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow input-enable pinconf Josua Mayer
2026-09-02 12:58 ` Linus Walleij
2026-09-03 9:23 ` Josua Mayer
2026-09-02 11:50 ` [PATCH v4 3/7] dt-bindings: usb: cypress,hx3: make peer-hub property optional Josua Mayer
2026-09-02 11:50 ` [PATCH v4 4/7] arm64: dts: renesas: add support for solidrun rzg2l som and hb-iiot evb Josua Mayer
2026-09-02 11:50 ` [PATCH v4 5/7] arm64: dts: renesas: add support for solidrun rzv2l " Josua Mayer
2026-09-02 11:50 ` [PATCH v4 6/7] arm64: dts: renesas: add support for solidrun rzg2lc " Josua Mayer
2026-09-02 11:50 ` Josua Mayer [this message]
2026-09-03 10:06 ` [PATCH v4 7/7] arm64: dts: renesas: rzg2l(c)/rzv2l hb-iiot: add dsi panel dt overlay Josua Mayer
2026-09-02 12:03 ` [PATCH v4 0/7] arm64: dts: renesas: Add various SolidRun RZ/G2 based boards Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260902-rzg2-sr-boards-v4-7-4a456a422fee@solid-run.com \
--to=josua@solid-run.com \
--cc=benjamin.bara@skidata.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=jon@solid-run.com \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mikhail.anikin@solid-run.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh@kernel.org \
--cc=yazan.shhady@solid-run.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox