[PATCH] usb: cdns3: report endpoint reset timeout

[Jiale Yao <yaojiale02@163.com>]

cdns3_gadget_ep_disable() discards the endpoint reset poll result and
then tests ret, which is still zero. A reset timeout is therefore
neither reported nor returned to the caller.

Store the poll result in ret so the existing diagnostic and return path
expose the timeout.

Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Jiale Yao <yaojiale02@163.com>
---
 drivers/usb/cdns3/cdns3-gadget.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c
index 42311c1bfada..53cc535309c5 100644
--- a/drivers/usb/cdns3/cdns3-gadget.c
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -2530,9 +2530,9 @@ static int cdns3_gadget_ep_disable(struct usb_ep *ep)
 				  !(val & EP_STS_DBUSY), 1, 10);
 	writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
 
-	readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
-				  !(val & (EP_CMD_CSTALL | EP_CMD_EPRST)),
-				  1, 1000);
+	ret = readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+					!(val & (EP_CMD_CSTALL | EP_CMD_EPRST)),
+					1, 1000);
 	if (unlikely(ret))
 		dev_err(priv_dev->dev, "Timeout: %s resetting failed.\n",
 			priv_ep->name);
-- 
2.34.1